My new intake

Bodykits, Interior modifications, Rice Products, anything that is for looks

Moderators: IMC, Club Staff

FTOluv
Veteran Mechanic
Posts: 983
jedwabna poszewka promocja
Joined: Fri Apr 23, 2004 5:00 pm
Location: Melbourne

Post by FTOluv »

i just ordered the filter from that kit. Available for $60.
User avatar
benm7
Grease Monkey
Posts: 102
Joined: Wed Mar 23, 2005 6:00 pm

Post by benm7 »

IT HAS ARRIVED!!!!

Looks good, will install after Christmas!
User avatar
benm7
Grease Monkey
Posts: 102
Joined: Wed Mar 23, 2005 6:00 pm

Post by benm7 »

It doesn't fit :(

It hits the battery, so i may need to reduce the size of the area between the TB and the first bend. That, or get a new battery...

Kev, did you have any problems like this? Looking at your pics it looks like yours is smaller as the silicon is touching the bend, and mine isnt.
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

Take a pic so i can have a look, i've got a full size 4WD battery on mine.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
User avatar
benm7
Grease Monkey
Posts: 102
Joined: Wed Mar 23, 2005 6:00 pm

Post by benm7 »

OK Will do, will take them tomorrow and post them.
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

hey can anyone tell me if my intake is good or not ? should i replace it or something or anything can you let me know thanx
these r pix


<img src="http://i24.photobucket.com/albums/c8/dj ... FN0013.jpg" alt="Image hosted by Photobucket.com">

<img src="http://i24.photobucket.com/albums/c8/dj ... FN0014.jpg" alt="Image hosted by Photobucket.com">
User avatar
Bennoz
National President
Posts: 23676
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

You'll pick up 5kws just by pissing off that stock pipe...

This is what you want

Image
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

ok cool where do i get that from.. should i get that or one of them silver ones wich the cooling thing everyone has done.
and is that hks airfilter good ? cos everyone on here has apexi
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

Finally took a clear pic of my engine bay when the car is actually not underground. :oops:

Image
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
User avatar
khunjeng
Oldtimer
Posts: 4455
Joined: Mon Oct 24, 2005 5:00 pm
Location: Melbourne, Victoria

Post by khunjeng »

looks nice...I still love my Unifilter rampod....and I did buy the shade stuff to wrap around my box...but never actually did it!
barfy
Mechanic
Posts: 779
Joined: Wed Feb 04, 2004 6:00 pm
Location: Adelaide

Post by barfy »

the way to get around making room for the intake tube to fit between the battery and the TB is to cut the brackett that holds the battery in place and reweld it back together again. I took my car to my auto electrition expecting to have the battery place in the boot when he came up with the idea here are some pics of my bracket compared to a stock one

Its hard to pick up but to make it alittle easier for ya's these batterys are the same size and the bracket that holds the battery is at the end of the top bar not 3 quarters along also the battery is place all the way over to the right and a new hole is drilled into the battery tray... Make sence ?? 8O

Stock one

Image

Mine

Image
[img]http://i142.photobucket.com/albums/r103/barfy76/barfycopy1.jpg[/img]
EURO
Oldtimer
Posts: 1346
Joined: Sun Sep 29, 2002 5:00 pm
Location: Melbourne

Post by EURO »

yeah i had to do the same thing... i kinda did a "dodgey job" but to similar effect, instead of moving the bracket I think I just bent it... but I had to to fit the arc intake pipe.
Gpx_xxx
Grease Monkey
Posts: 256
Joined: Tue May 30, 2006 5:00 pm
Location: Sydney
Contact:

Post by Gpx_xxx »

Do they post to sydney?? $150 is real cheap I'll get one just need 2 know if they post 2 sydney let me know asap! I want to get em :D
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

They do post it anyway in Australia, at the buy expense of course. Just give them a buzz, their number should be on page 1 of this thread.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
Gpx_xxx
Grease Monkey
Posts: 256
Joined: Tue May 30, 2006 5:00 pm
Location: Sydney
Contact:

Post by Gpx_xxx »

hey! i just fitted the pipe from ontherun its NO GOOD! wheres the sound!! :cry: my stock pipe + K&N filter sounds better.. With this new pipe i cant fit my K&N filter so i had 2 get some other filter. but no sound just feels bit faster :cry: NOO!!
shue
Oldtimer
Posts: 1347
Joined: Mon Mar 07, 2005 6:00 pm
Location: 1000 posts n still whoring

Post by shue »

but no sound just feels bit faster
isnt that a good thing then ? :?
<div><strong>My Car for Sale - Contact Me</strong></div><br>
Gpx_xxx
Grease Monkey
Posts: 256
Joined: Tue May 30, 2006 5:00 pm
Location: Sydney
Contact:

Post by Gpx_xxx »

shue wrote:
but no sound just feels bit faster
isnt that a good thing then ? :?
No shue! i want better sound :cry: like rawr!!! haha do u think i did something wrong my frend put it in he a mechanic
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

Drill a hole in it, u get plenty of sound & no go :lol: :roll:
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
Gpx_xxx
Grease Monkey
Posts: 256
Joined: Tue May 30, 2006 5:00 pm
Location: Sydney
Contact:

Post by Gpx_xxx »

FTO338 wrote:Drill a hole in it, u get plenty of sound & no go :lol: :roll:
bahahaha oh well...
shue
Oldtimer
Posts: 1347
Joined: Mon Mar 07, 2005 6:00 pm
Location: 1000 posts n still whoring

Post by shue »

Drill a hole in it, u get plenty of sound & no go
rofl :lol:
<div><strong>My Car for Sale - Contact Me</strong></div><br>
Post Reply