Rear Wheel Bearing crown nut size?

Post by **Shhtuart** » Mon Nov 19, 2012 5:13 pm

Does anyone know what size the nut is?

Fanks.

Post by **Bennoz** » Mon Nov 19, 2012 7:17 pm

I think its 24mm from memory...

Sahin · Post by **Sahin** » Mon Nov 19, 2012 7:19 pm

Yeah 24 came to mind also

Sahin · Post by **Sahin** » Mon Nov 19, 2012 7:20 pm

Yeah 24 came to mind also

Post by **vipfto** » Tue Nov 20, 2012 8:20 am

Always thought was 30 or 32 remember having to buy one at some stage as didnt have big enough one

Post by **Bennoz** » Tue Nov 20, 2012 8:36 am

Who's got a car in pieces at the moment?

Dwayne? Taz?

Taz · Post by **Taz** » Tue Nov 20, 2012 8:50 am

ill see if i have one floating around, but the wheels are still stuck on maverick lmao

Post by **Shhtuart** » Tue Nov 20, 2012 2:50 pm

I was going to get my mechanic to change it but I've got the DIY day in a couple of weeks so may as well do it then.

Thanks in advance for whoever can be arsed finding it

payaya · Post by **payaya** » Sun Nov 25, 2012 10:47 pm

Fronts are 32mm. Rears I have no clue as I never have changed one. Usually the size of Mitsubishi rear crown nuts are 32mm as well.

Post by **Shhtuart** » Mon Nov 26, 2012 5:27 pm

payaya wrote:Fronts are 32mm. Rears I have no clue as I never have changed one. Usually the size of Mitsubishi rear crown nuts are 32mm as well.

I'll have to take the wheel off and have a look then!

Will update once confirmed.

Post by **vipfto** » Mon Nov 26, 2012 6:16 pm

It's 32

Post by **Shhtuart** » Sun Dec 02, 2012 2:47 pm

vipfto wrote:It's 32

I changed it yesterday and it was a 30mm on my facelift GPvR.

The rear bearings were different between facelift and pre-facelift.

Thanks everyone.

Post by **Bennoz** » Mon Dec 03, 2012 7:24 am

Shhtuart wrote:
vipfto wrote:It's 32
I changed it yesterday and it was a 30mm on my facelift GPvR.

The rear bearings were different between facelift and pre-facelift.

Thanks everyone.

Can you show us some comparison pics?

Post by **Supplanter** » Mon Dec 03, 2012 7:49 am

Bennoz wrote:
Shhtuart wrote:
vipfto wrote:It's 32
I changed it yesterday and it was a 30mm on my facelift GPvR.

The rear bearings were different between facelift and pre-facelift.

Thanks everyone.
Can you show us some comparison pics?

This is a family friendly forum, Bennoz.

Post by **Shhtuart** » Mon Dec 03, 2012 2:17 pm

Bennoz wrote:
Shhtuart wrote:
vipfto wrote:It's 32
I changed it yesterday and it was a 30mm on my facelift GPvR.

The rear bearings were different between facelift and pre-facelift.

Thanks everyone.
Can you show us some comparison pics?

Between facelift and pre-facelift?

Post by **Shhtuart** » Wed Dec 05, 2012 9:59 pm

This is what the facelift bearing looks like, the abs ring is transferrable and not built in;

The pic says up to 97 but that's what the MR316500 looks like on the back but it has 5 holes for the ABS ring.

: faceliftrear.jpg (75.94 KiB) Viewed 292 times

This is the one I bought from ebay (zaccsbearings)

http://www.ebay.com.au/itm/MITSUBISHI-F ... 53e6c16d31

: 20121205_215133.jpg (67.04 KiB) Viewed 292 times

ZFL45H1 · Post by **ZFL45H1** » Thu Dec 06, 2012 4:29 am

Shhtuart wrote: This is the one I bought from ebay (zaccsbearings)

Where I got mine great seller I think

Post by **Bennoz** » Thu Dec 06, 2012 11:34 am

I'm just trying to establish why they changed it, was it a purposeful improvement, or change for the sake of change - and can one be made to fit the other (facelift v non.) etc.

Post by **Shhtuart** » Thu Dec 06, 2012 4:18 pm

Bennoz wrote:I'm just trying to establish why they changed it, was it a purposeful improvement, or change for the sake of change - and can one be made to fit the other (facelift v non.) etc.

The facelift one is backwards compatible with non abs pre facelift you just don't use the abs ring. No idea why they would do that put maybe they revised the abs in the rear for some reason.

FTO AUSTRALIA

Rear Wheel Bearing crown nut size?

Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?

Re: Rear Wheel Bearing crown nut size?