vibrationnnnnnnnn :( and the rest :D NEW ENGINE TIME UPDATE!

[Astron_Boy]

This car.

Is cursed.

Bin it, it wants to die...

Lend it to Lawso for a weekend...

[Alexplicit]

we have already had this discussion at work, im not overly concerned, the guy that *adjusted* the tappets is up for the costs, if the engine needs to be replaced, so be it, ill throw the extra coin in and get the 6a13

we are going to hone it, if its worthy of doing so, if not, i will have to get another engine / buy the 6a13tt thats for sale here.


also i cant see those pics

[Shane001]

agree with Ben, that engine is now good for spares only lol!

I'll bet it was one of the washers off the nuts on either end of the intake runners. Those little nuts are a pita

[Alexplicit]

well if the heads are stuffed, thats ok! i have the old engine with minty fresh heads

if the block is stuffed... thats only semi ok, means i have to drive down the road and pick up another block..

sigh... ..

i wont give up on the car it just would be handy to have my integra on the road aswell.. as the fto is my daily

hopefully the integra will be out of the panel beaters in 6 days!

[Alexplicit]

*EDIT

[Alexplicit]

just about to post some pics of what me and Vectose ( Rob ) found in the engine

not going to bother even pulling this engine down. not worth it

me and rob both got metal thrown at us through the spark plug hole... bits of piston we assume lol, orrrrr whatever the fuzz fell down the intake.. still havnt worked that out

weve come to a conclusion, that my fto has eaten more engines in a time frame then any other fto in the world!

this afternoon, i went and got ANOTHER engine! and will be building one out of the 2 i have sitting here, ill be using the heads off the 1st engine, because they had NO overhead noise at all, and the new block, as i know its in good condition

so round 92348438 DING DING!

[Bennoz]

Credit to you sir, you have moar patience than I do

[Vectose]

So Phil just called me up and was concerned that I was the one that f**ked the engine.

To clarify, it was not me.

[PHIL069]

Sorry to hear about your bad luck.

Should have waited for the tappet master

[dstocks]

The engine that washer fell down into was the one that was in the ute at the bonfire if im guessing correctly (onlyjust joined the dots - im a bit slow ....). It was a low mileage engine from ichibahn that was sold to me with 140K on the clock and it would have done less than 1km before it got taken out of the ute. Certainly sounded OK when in the ute. Slight tappet noise, but no more than is common in these engines. I wasnt getting the vibration in the ute (although that was a tiptronic box). I didnt replace anything on the engine when I put it in the ute (apart from fluids) as it was never going to do much in the way of mileage. Not that this really matters now I guess. Hope your luck improves........

[Vectose]

Wouldn't have mattered Phil, you wouldn't have been the one putting the engine back together.

[PHIL069]

So Phil just called me up and was concerned that I was the one that f**ked the engine.

To clarify, it was not me.

I was concerned , I was about to come over and clip you behind the ears

Wouldn't have mattered Phil, you wouldn't have been the one putting the engine back together.

I know that, I didn't want you to pay for the replacement engine when all you were doing was helping out a fellow member. I was just going to support you.
No offence intended to you Alex

[Alexplicit]

none taken

no the person responsible is a work colleague of mine, he is a qualified mechanic, and in his defence, he may of completely rectified the tappet noise, (although we will never know ) he also went out of his way to help me pull apart the entire front end and replace just about everything that was wrong with it with us

it was his big headedness that cause this, it WAS A MISTAKE, and i dont intend on charging him anything for it, i just want him to help me rebuild the engine, and get it back in, i want time, not money. ive told him ill pay for what we need.

[Alexplicit]

the biggest problem was....

He was not being ONE with the triangle.

[PHIL069]

the biggest problem was....

He was not being ONE with the triangle.

He needs to go to triangle classes

[Technikhaus]

Now, let's hope that this one lasts for the long term!

[Sahin]

Damn you beat my record

[Alexplicit]

Lol, I guess I'm getting pretty lucky, third engine, and everything has only cost me 200 dollars so far

That's including the new F + R strut braces I acquired

With the new engine I also got a gearbox

[shadowarrior]

200 bucks..for an engine plus F+R strut braces?????

[Sahin]

f**k you! Lol