Wrecking whole car
Moderators: IMC, Club Staff
-
- Newbie
- Posts: 1
- jedwabna poszewka promocja
- Joined: Mon Nov 21, 2011 1:17 pm
Re: Wrecking whole car
I am really interested about the air-con compressor.
how much would postage be to brisbane??
Could you please provide the photo as your convenience. thanks so much~
how much would postage be to brisbane??
Could you please provide the photo as your convenience. thanks so much~
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Wrecking whole car
Done, no problemAstron_Boy wrote:Is collection payment at the Xmas party cool Bennoz, or would you rather before then?
Vents - no probs will pull out this arvohhakan wrote:aircon vents (all of them)
boot interia (the carpet and wood thingy)
and the aircon unit
and other minor stuff that i cant think of yet
Boot int - No probs, its all there. Wood board is a little warped, but could be reshaped
A/C - As in the climate control unit in the dash?
Yes they will fit. I actually have a second manual set, but the rubbers are almost shot in them. You could grab inserts from Auto One & press them in if you wanted to reco them.FTO-BOY wrote:So I take it as the manual engine mounts don't fit on a tip?
Apologies mate, but rims are now gone.bob_oz wrote:i'm after a single 16" stock rim or a pair of rims,
did it have the 5-spoke type silver stockies on it?
Can do, will take it out this arvo & take a pic.pokai41 wrote:I am really interested about the air-con compressor.
- Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
Re: Wrecking whole car
Hang on.Bennoz wrote:Yes they will fit. I actually have a second manual set, but the rubbers are almost shot in them. You could grab inserts from Auto One & press them in if you wanted to reco them.FTO-BOY wrote:So I take it as the manual engine mounts don't fit on a tip?
I swear that I read the manuals couldn't be used with the autos due to there design and size...
Will read over the thread now, but I was next to postivie, again otherwise you wouldn't have that cross member, I would have collected on the day then and there.
Do need as our engine is sitting on the cross member, no rubber mounts at all.
Edit: viewtopic.php?f=23&t=15195
Have I read it wrong?
- Eltnot
- Mechanic
- Posts: 422
- Joined: Wed Nov 26, 2008 6:00 pm
- Location: Stafford, Brisbane, QLD
Re: Wrecking whole car
Folding mirror switch received, cheers.
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Wrecking whole car
Astron_Boy wrote:Hang on.Bennoz wrote:Yes they will fit. I actually have a second manual set, but the rubbers are almost shot in them. You could grab inserts from Auto One & press them in if you wanted to reco them.FTO-BOY wrote:So I take it as the manual engine mounts don't fit on a tip?
I swear that I read the manuals couldn't be used with the autos due to there design and size...
Will read over the thread now, but I was next to postivie, again otherwise you wouldn't have that cross member, I would have collected on the day then and there.
Do need as our engine is sitting on the cross member, no rubber mounts at all.
Edit: viewtopic.php?f=23&t=15195
Have I read it wrong?
Its the same cross member, same mounting brackets on the box, same mounting points, same metal frames on all mount types.
The only difference is in the bushing itself, tip have an open bush, manuals are solid rubber. Why wouldn't you want solid mounts if you drive hard? Less torque lost through engine twist.
Only difference is a bit more cabin vibration.
- Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
Re: Wrecking whole car
Nah, I well realise all that, but from observation of what I saw, the tips had a smaller size rear mount rubber, and was slightly angled in one direction to which the manuals did not?Bennoz wrote:
Its the same cross member, same mounting brackets on the box, same mounting points, same metal frames on all mount types.
If they are identical, then I'll def take it off you as I need it, one big thing stopping the car from being driven.
Meanwhile, what's wrong with the forums sync lately? Latest replies are all showing up whacked in the index.
EDIT: Gonna strap my size 15s on for this one (I say 15s as I have size 12s already)
If I were to bring the FTO, could we perhaps drop and install on the Sunday after Xmas party?
Can help refill your fridge...
-
- Apprentice
- Posts: 24
- Joined: Sun Oct 02, 2011 4:48 pm
- Location: Darwin, NT
Re: Wrecking whole car
Do you have any pictures of the front seats Ben?
- Taiwo
- Mechanic
- Posts: 463
- Joined: Sun May 15, 2011 6:53 pm
- Location: Brisbane, Wakerley
Re: Wrecking whole car
Do u have radiator n condensor n all the plastic bits. If so how much are u willing to let them go for.
- zuihoujueding
- Oldtimer
- Posts: 1980
- Joined: Thu Aug 31, 2006 5:00 pm
- Location: Sydney
Re: Wrecking whole car
Still.have driver side front wheel arch liner and under tray?
- JOA81
- Mechanic
- Posts: 773
- Joined: Tue Nov 02, 2010 10:11 pm
- Location: qld, morayfield
Wrecking whole car
Do you happen to have the panel that surrounds the instrument cluster with a fog light switch in it like this
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Wrecking whole car
Actually I do. How does $20 + postage sound?
- JOA81
- Mechanic
- Posts: 773
- Joined: Tue Nov 02, 2010 10:11 pm
- Location: qld, morayfield
Wrecking whole car
Ok so that's for the panel and the fog light switch because I'm after the fog light switch as one of my ftos doesn't have it and I just put fog lights on it
- zuihoujueding
- Oldtimer
- Posts: 1980
- Joined: Thu Aug 31, 2006 5:00 pm
- Location: Sydney
Re: Wrecking whole car
Re: Wrecking whole car
Still.have driver side front wheel arch liner and under tray?
Still.have driver side front wheel arch liner and under tray?
- Star_Lancer
- Grease Monkey
- Posts: 236
- Joined: Mon Aug 29, 2005 5:00 pm
Re: Wrecking whole car
I'd be interested in the passenger side door speaker cover! How much?
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Wrecking whole car
Sorry, the fog light switch is gone.
Got both the arch liner & speaker cover. Make me an offer
Got both the arch liner & speaker cover. Make me an offer
- JOA81
- Mechanic
- Posts: 773
- Joined: Tue Nov 02, 2010 10:11 pm
- Location: qld, morayfield
Wrecking whole car
Nah I got the panel I just need the switch sorry
- Rosiebella
- Grease Monkey
- Posts: 180
- Joined: Thu Apr 28, 2011 10:10 am
Re: Wrecking whole car
i do need a left tail light.. so if its not gone let me know
- Taiwo
- Mechanic
- Posts: 463
- Joined: Sun May 15, 2011 6:53 pm
- Location: Brisbane, Wakerley
Re: Wrecking whole car
do u still have the kick plates and the wood grain tip box
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Wrecking whole car
Kick plates no, wood grain tip surround yes
- Taiwo
- Mechanic
- Posts: 463
- Joined: Sun May 15, 2011 6:53 pm
- Location: Brisbane, Wakerley
Re: Wrecking whole car
how does $30 sound for the wood grain surround or a 6pack of your favourite beer