Sounds like a good idea...Bennoz wrote:
So glad I spent all that money on the red coating, you can really see it![]()
Haven't gone for much more than a few laps of the block at this stage, so can't really give a detailed review yet.
I can say that it behaves like quite the gentleman when slow speed manouvering, no more clunking & neck snapping clutch plate chatter.
It drives just like a normal full slip diff. The only chance I had to punch it was down Sunnyholt road breifly & its just like it used to, it left
2 thick black tracks all the way down to my turn off![]()
In going to go easy on it till next Tuesday when I'll do an oil change on the box. Call me paranoid, but because it was a ground up rebuild
including clusters & syncros, I want to bed it in a bit first.
Then, come Wednesday next week I might throw her down the strip at Eastern Creek before a full blown run at Wakfield on Thursday
Bennoz 6A13 Conversion
Moderators: IMC, Club Staff
- rock_it
- Oldtimer
- Posts: 6599
- jedwabna poszewka promocja
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Bennoz 6A13 Conversion
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke![]()
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
![]()
- bass_twitch
- Oldtimer
- Posts: 2423
- Joined: Thu May 27, 2010 3:37 pm
- Location: Western Sydney, NSW
Bennoz 6A13 Conversion
Can I come watch? I'm assuming wednesday night drag?Bennoz wrote:
So glad I spent all that money on the red coating, you can really see it![]()
Haven't gone for much more than a few laps of the block at this stage, so can't really give a detailed review yet.
I can say that it behaves like quite the gentleman when slow speed manouvering, no more clunking & neck snapping clutch plate chatter.
It drives just like a normal full slip diff. The only chance I had to punch it was down Sunnyholt road breifly & its just like it used to, it left
2 thick black tracks all the way down to my turn off![]()
In going to go easy on it till next Tuesday when I'll do an oil change on the box. Call me paranoid, but because it was a ground up rebuild
including clusters & syncros, I want to bed it in a bit first.
Then, come Wednesday next week I might throw her down the strip at Eastern Creek before a full blown run at Wakfield on Thursday
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: Bennoz 6A13 Conversion
Can you note if the turning line changes depending on your throttle input?
With my cusco 1.5 way the turning line changes if I press a bit of throttle, coast or decelerate. A bit annoying to be honest
With my cusco 1.5 way the turning line changes if I press a bit of throttle, coast or decelerate. A bit annoying to be honest
- Gholdwayne
- Oldtimer
- Posts: 2657
- Joined: Mon Dec 22, 2008 6:00 pm
- Location: The edge of Woodcroft. Edgewood!
- Contact:
Re: Bennoz 6A13 Conversion
I wanna watch too! I really want a ride in this beast too...
97 GPX Icelle Blue
I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!
FTO[For The Orgasm]
like For The Win!, but more hardcore...
I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!
FTO[For The Orgasm]
like For The Win!, but more hardcore...
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Bennoz 6A13 Conversion
We have a win
I can see a glimpse of red of the box
As for the 1/4 can you do that after the track day
But great work on getting every thing done and running again
.
This is going to be a great day at the track.

I can see a glimpse of red of the box

As for the 1/4 can you do that after the track day

But great work on getting every thing done and running again

This is going to be a great day at the track.
- Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
Re: Bennoz 6A13 Conversion
oooh, it's so re... where the fudge is it?
lolz, well, least it's in and runs sweet, can't wait to hear the results from the track run.
lolz, well, least it's in and runs sweet, can't wait to hear the results from the track run.

- Gholdwayne
- Oldtimer
- Posts: 2657
- Joined: Mon Dec 22, 2008 6:00 pm
- Location: The edge of Woodcroft. Edgewood!
- Contact:
Re: Bennoz 6A13 Conversion
Damnit, i just realized Bennoz was just being sarcasticBennoz wrote:So glad I spent all that money on the red coating, you can really see it![]()

97 GPX Icelle Blue
I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!
FTO[For The Orgasm]
like For The Win!, but more hardcore...
I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!
FTO[For The Orgasm]
like For The Win!, but more hardcore...
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Bennoz 6A13 Conversion
That pissed me off to no end with the old Cusco. It was super exaggerated in my car, full boost if you weren't ready could throw you into a tree when the line changed so dramatically. I'd go from following a nice line to almost an under steer situation.spetz wrote:Can you note if the turning line changes depending on your throttle input?
With my cusco 1.5 way the turning line changes if I press a bit of throttle, coast or decelerate. A bit annoying to be honest
No signs of that with this yet, but wont really find out till Thursday.
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Bennoz 6A13 Conversion
Yes, all can come watch if you like. I'll confirm on the day (weather pending) 

- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Bennoz 6A13 Conversion
If the rain holds off tomorrow (which it most likely wont now that I've posted this) Im going for a run down the drags at Eastern Creek. Feel free to come & watch! Im going to try get into scruitineering early, about 4:30pm.
- bass_twitch
- Oldtimer
- Posts: 2423
- Joined: Thu May 27, 2010 3:37 pm
- Location: Western Sydney, NSW
Bennoz 6A13 Conversion
Hmm... So what time would the car be running?Bennoz wrote:If the rain holds off tomorrow (which it most likely wont now that I've posted this) Im going for a run down the drags at Eastern Creek. Feel free to come & watch! Im going to try get into scruitineering early, about 4:30pm.
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Bennoz 6A13 Conversion
Depends how many cars there are. I've had as many as 10 runs & as few as 3. Goes till late though.
- bass_twitch
- Oldtimer
- Posts: 2423
- Joined: Thu May 27, 2010 3:37 pm
- Location: Western Sydney, NSW
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Bennoz 6A13 Conversion
Drags have been cancelled due to the weather.
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: Bennoz 6A13 Conversion

Have you done a run before?
And, review on the diff after the track day?
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: Bennoz 6A13 Conversion
on the plus side... its taken you 50 pages to get the fkr on the road...
congrats... and (greg) murphy's law for jynxing the drags you old bastard
congrats... and (greg) murphy's law for jynxing the drags you old bastard

- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Bennoz 6A13 Conversion

No, not run it down the strip in its current guise. Last time I did was with the old GR motor on happy gas & it ran a 14.9.
The diff is sensational. Whatever the 'Wavetrac' centre design does to keep power down during traction loss, it does it really really well. Even taking off in a straight line in a hurry, I can feather the throttle in 1st & 2nd, put about 70% power down & still have traction. Certainly a shitload more than the Cusco, when it got too much throttle it just locked up the clutch plates & wheelspan. This new diff is much nicer to drive with.
There's is also no line changing during corners when different levels of throttle are applied & it feels like a normal full slip diff when slow speed manouvering. I'll never go back to Cusco again, this is far superior.
Oh & you should have seen the colour of the oil that came out of the box this weekend, I did it's first flush & from now on I recommend anyone who's had a ground up box rebuild - do a 1000km oil change. It was black...
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: Bennoz 6A13 Conversion
Good to hear about the diff. Maybe one day I will swap over my Cusco LSD as well. How much do you think I can sell it for?
Maybe your oil is black due to the power you run? ie, you're slowly turning your gearbox internals to shrapnel!
By the way, what final drive do you run?
Maybe your oil is black due to the power you run? ie, you're slowly turning your gearbox internals to shrapnel!
By the way, what final drive do you run?
- Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
Re: Bennoz 6A13 Conversion
spetz wrote:ie, you're slowly turning your gearbox internals to shrapnel!


- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: Bennoz 6A13 Conversion
Bennoz I forgot to ask, with my 1.5 way if I put 1 wheel on grass and the other on pavement, it will still leave a black mark on the pavement on take off. What would your wavetrac do?