Any Questions for Mitsubishi

General Questions and comments

Moderators: IMC, Club Staff

User avatar
Black_FTOGPX
Mechanic
Posts: 451
jedwabna poszewka promocja
Joined: Sun Apr 27, 2003 5:00 pm
Location: Melbourne

Post by Black_FTOGPX »

OK guys, got info on the recall
Recall notification number 1122
Recall notification day June 18, Heisei 16
Recall opening day June 19, Heisei 16

It effects vehcles with Chassis number between DE3A-0000025 and DE3A-0013017 and production dates Oct/03/1994~Oct/31/1995 for the GPX and GR.

AND VEHICLES BETWEEN DE2A-0000008~DE2A-0001566 ,PRODUCTION DATES Oct/13/1994~March/03/1995.

Please read below for my contacts translation of the recall.

About the electric wiring harness of the FTO engine room, and also the electric wiring harness of the glove box of FTO

The situation and its cause of the structure, that is in a standard incongruent state, equipment, or a performance.
1) There is what has the unsuitable fixed method of the electric wiring harness routing for vehicle speed sensors in the engine room, and the electric wiring harness routing for idol number-of-rotation speed control devices. The electric wiring harness is pulled by the rotation of the engine under driving operation. Therefore, when the worst, wiring is disconnected and there is a possibility of mull functions of speedometer function, or an uncontrollable in keeping the proper engine idol number-of-rotation speed.

2) There is what has narrow clearance of the electric wiring harness of the between the glove box attachment brackets. The electric wiring harness and the bracket concerned may interfere by the vibration under driving operation, and the covering of electric wiring harness may be damaged. Therefore, when the worst, wiring short-circuits, a fuse goes out and there is a possibility that wiper operating or engine starting operation may become impossible.

The contents of an improvement measure

(1) Change the fixed position of the wiring harness in all vehicles and an engine room.
(2) Apply a masking tape on all vehicles and a glove box attachment bracket terminal.

In addition, wiring is checked, when (1) and (2) are damaged, if the condition is fixable,
correct harness and routing corrects, if the condition is uncorrectable, exchange them for
a new replacement parts.

I am waiting on my contact to give me a web address which contains pictures of the fault.
If you need more info just reply your question to this thread and i will pass it on.
Last edited by Black_FTOGPX on Fri Jul 02, 2004 12:00 pm, edited 2 times in total.
User avatar
smorison
The Godfather
Posts: 2461
Joined: Sun Aug 04, 2002 5:00 pm
Location: In the TRUCK!!!
Contact:

Post by smorison »

fantastic work there :)
User avatar
Black_FTOGPX
Mechanic
Posts: 451
Joined: Sun Apr 27, 2003 5:00 pm
Location: Melbourne

Post by Black_FTOGPX »

User avatar
dannyboyau
Veteran Mechanic
Posts: 979
Joined: Sat Sep 28, 2002 5:00 pm
Location: that speck disappearing in the distance

Post by dannyboyau »

well done mate
User avatar
Black_FTOGPX
Mechanic
Posts: 451
Joined: Sun Apr 27, 2003 5:00 pm
Location: Melbourne

Post by Black_FTOGPX »

The thing I find funny about this recall, is that the cars are like 10 years old, but the recall was released this year. (Talk about dodgy)

Seriously though, everybody should be checking there chassis numbers ASAP, to see if this applies to them. As I would not like to hear of somebody getting hurt because of this.

If your chassis number fits into this category, I can get more detailed information of the repair procedure of it.
Adriano
Grease Monkey
Posts: 367
Joined: Thu Apr 24, 2003 5:00 pm
Location: Sydney West

Post by Adriano »

my chassis no applies to it... but is it for the gpx only?? i got a gr....
User avatar
Black_FTOGPX
Mechanic
Posts: 451
Joined: Sun Apr 27, 2003 5:00 pm
Location: Melbourne

Post by Black_FTOGPX »

I’m pretty sure this applied to all models including the GS 1.8 litre.

I’m pretty sure that GR’s chassis numbers start with DE3A, don’t they?
Adriano
Grease Monkey
Posts: 367
Joined: Thu Apr 24, 2003 5:00 pm
Location: Sydney West

Post by Adriano »

yeah it starts with dE3A, just thought it was only for gpxs...
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

Black_FTOGPX wrote: It effects vehcles with Chassis number between DE3A-0000025 and DE3A-0013017 and production dates Oct/03/1994~Oct/31/1995 for the GPX and GR.

AND VEHICLES BETWEEN DE2A-0000008~DE2A-0001566 ,PRODUCTION DATES Oct/13/1994~March/03/1995.
Well done for getting all these info that we would never able to find & get. GREAT JOB.

Now if I go according to the date above, thats acounted for 80% of the FTO imported to Aus. Man thats bad. :?
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
User avatar
Black_FTOGPX
Mechanic
Posts: 451
Joined: Sun Apr 27, 2003 5:00 pm
Location: Melbourne

Post by Black_FTOGPX »

Can anybody whose chassis number is within this recall, please post stating that there vehicle falls into this.

I think I have an idea! :wink:
User avatar
Leigh
Apprentice
Posts: 78
Joined: Mon Feb 23, 2004 6:00 pm
Location: Perth.

Post by Leigh »

Ahh shite, mines DE3A - 0010207
:P
Hope I get a new car!
Adriano
Grease Monkey
Posts: 367
Joined: Thu Apr 24, 2003 5:00 pm
Location: Sydney West

Post by Adriano »

me in!! :roll:
User avatar
Supplanter
Forum Moderator
Posts: 6422
Joined: Tue Oct 22, 2002 5:00 pm
Location: Arizona Bay
Contact:

Post by Supplanter »

UH oh, me too :roll:
LED ALL the things.
User avatar
fto617
Veteran Mechanic
Posts: 1069
Joined: Thu Apr 29, 2004 5:00 pm
Location: Sydney

Post by fto617 »

hey i'm in this too !
wats gona happen?
and i just blew my gearbox god dammit
well its rebuilt now !
but cant find a speedogear or speed sensor or something !
haiii
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

I think there should be a new sticky with warning sign of some sort for this topic as not everyone read every this post, & i this is very very important information for all FTO owner.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
indyfto
Grease Monkey
Posts: 197
Joined: Thu Oct 17, 2002 5:00 pm

Post by indyfto »

There are two vague exploded diagrams (albeit in Japanese!) here:

http://babelfish.altavista.com/babelfis ... l&lp=ja_en

Scroll to the bottom of the page and click on the links for the two pics of the recall issues.

Now I'm even happier I got a 96 model as opposed to a 94/95 :wink:
ruchi
Oldtimer
Posts: 1845
Joined: Tue Oct 14, 2003 5:00 pm
Location: Melbourne

Post by ruchi »

Black_FTOGPX wrote:
2. what is the Co efficent of drag for the FTO GPX
Co efficent is that right or should it be Co efficient ?

Sorry guys its just that im drafting the email up and i know for a fact when you have a language difference in emails , having things spelt incorrectly can cause huge confusion.
ruchi wrote:co-efficient

...and remember to add with this question what is the "frontal area" of the FTO?
Did you ask about the CD and frontal area of the GPX? (I can see you asked about the Nakaya Tuned model, but the GPX is the main one we want as this is what most people have)
MIVEC is My Friend :D
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

indyfto wrote: Now I'm even happier I got a 96 model as opposed to a 94/95 :wink:
Yeah my compliance said its a 95, but i'm one of those lucky one that got one build after 31st of Oct 95. Funny though if i go according to the chassis number, mine should be build during 96 :roll:

Does anyone know how may FTO was sold/build during 96? So i can kinda work out when mine was build?
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
User avatar
rxboy
Mechanic
Posts: 748
Joined: Thu Feb 27, 2003 6:00 pm
Location: SE Melbourne
Contact:

Post by rxboy »

FTO338 wrote:Does anyone know how may FTO was sold/build during 96? So i can kinda work out when mine was build?
2928
TimmyD
Mechanic
Posts: 510
Joined: Sat Oct 11, 2003 5:00 pm
Location: Melbourne
Contact:

Post by TimmyD »

rxboy wrote:
FTO338 wrote:Does anyone know how may FTO was sold/build during 96? So i can kinda work out when mine was build?
2928
wow thats pretty acurate... howd u find that out? or is that jus some random number. lol :P
Post Reply