Powersteer belt

[vipfto]

Totally forgot but can someone post up the part number for powersteer belt that by-passes A/C?

I know its on here somewhere but cant find it

[Bennoz]

6PK938

[vipfto]

cheers

your not as big a wanker as everyone says you are

[Bennoz]

Ta...

[Kustom]

cheers

your not as big a wanker as everyone says you are

Im a wanker too

Don't edit me. Dickhead.

What I originally said was, I call bullshit.

[vipfto]

we all know that

[Kustom]

Tard mods.

[Bennoz]

[vipfto]

OK 6PK938 is too short to fit over crank and p/s pully's

Instead I used original belt via using tensioner other way round and its spot on
To do this however you will need to remove A/C compressor (I have removed entire A/C system though)

Only done this as intend to use it more for track than road use shortly as have bought another shitbox camry as a daily runner (does need new engine though bottom end is fucked )

[aza013]

I hope you still have all the A/C parts as I want a full weight of it all when it's all out

[vipfto]

yip pulled them out last night and will weigh it all this arvo

[Bennoz]

OK 6PK938 is too short to fit over crank and p/s pully's

Blame Camskill, thats where I got the part number!

[vipfto]

I hope you still have all the A/C parts as I want a full weight of it all when it's all out

Total weight = 10kgs

2kg = condensor
6kg = compressor
2kg = rest of piping incl all bolts and brackets (up to firewall)

not much but coupled with not having the extra load on compressor on motor = every little bit counts

[aza013]

Cool thanks for that

[Bennoz]

Nice!

[Shane001]

coupled with not having the extra load on compressor on motor = every little bit counts

U do know that with the air conditioning turned off there is sweet f**k all load on the engine as the compressor simply acts as an idler. The only benefit in removing them is weight saving.

Also if taking it to the track, make sure that belt is real tight and check it after the first 3 sessions, it will stretch and if it's not tight it will come off, I know, race track proven

[vipfto]

I know but though may aswell do it as getting lighter crank pulley made up and already got lightened flywheel to go with it