FTO quarter mile?
Moderators: IMC, Club Staff
- ellusion
- Grease Monkey
- Posts: 201
- jedwabna poszewka promocja
- Joined: Wed Sep 18, 2002 5:00 pm
FTO quarter mile?
Hmm.. i own an fto yet i dunno the rated specs.
Whats the quarter mile time for a FTO GPX and GR? I'm guessing around the 15 mark... whats the factory rating?
Whats the quarter mile time for a FTO GPX and GR? I'm guessing around the 15 mark... whats the factory rating?
- GPXXX
- Oldtimer
- Posts: 3433
- Joined: Sat Apr 12, 2003 5:00 pm
- Location: < the matrix >
-
- Grease Monkey
- Posts: 160
- Joined: Fri Jun 06, 2003 5:00 pm
- Location: Scotland
I've managed a 15.232 at Santa Pod on the same day that Mark (EVO'd FTO) done his 13.686. It had been raining in the morning and the strip wasn't as sticky as it could of been so I believe a manual with a CAT should be low 15s. I have an induction kit and a CAT bypass pipe and with a good launch I would hope to get into the high 14s but I don't think I would get near the Freaks time (14.452s)
I have sent my slip in but it hasn't been added to the list
http://www.mitsubishi-fto.net/qmile/index.htm
Brian
I have sent my slip in but it hasn't been added to the list
http://www.mitsubishi-fto.net/qmile/index.htm
Brian
- RichardH
- Grease Monkey
- Posts: 309
- Joined: Sat Aug 10, 2002 5:00 pm
- Location: Perth, WA
- Contact:
- GPXXX
- Oldtimer
- Posts: 3433
- Joined: Sat Apr 12, 2003 5:00 pm
- Location: < the matrix >
maybe we should have our own Hall of Fame timelsip section too hehe...salacious wrote:I have sent my slip in but it hasn't been added to the list
http://www.mitsubishi-fto.net/qmile/index.htm
Brian

- Supplanter
- Forum Moderator
- Posts: 6422
- Joined: Tue Oct 22, 2002 5:00 pm
- Location: Arizona Bay
- Contact:
- Black_FTOGPX
- Mechanic
- Posts: 451
- Joined: Sun Apr 27, 2003 5:00 pm
- Location: Melbourne
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
I doubt that you will hit the speed limiter during 1/4 mile, which should be 180Km/h for all JDM vehicle.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- RichardH
- Grease Monkey
- Posts: 309
- Joined: Sat Aug 10, 2002 5:00 pm
- Location: Perth, WA
- Contact:
- Black_FTOGPX
- Mechanic
- Posts: 451
- Joined: Sun Apr 27, 2003 5:00 pm
- Location: Melbourne