FTO conking out...

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
Tyger
Newbie
Newbie
Posts: 4
jedwabna poszewka promocja
Joined: Mon Nov 09, 2009 6:00 pm
Location: Sydney

FTO conking out...

Post by Tyger »

Hey,
Had my FTO for a few weeks now and quite a few times it has conked out and not started for at least 10 mins.
At first I thought it maybe a fault with the immobilizer, but I have disconnected it now (still have to fully take it out) and it's still happening.
I think it might be something to do with the fuel or air intake or maybe something overheating. Although the temp gauge isn't indicating a problem the fact that is starts after 10 or so mins might be because it has had time to cool down.
It's also been happening more as the weather has been warming up.
Anyone else had a similar problem or know what might be causing this?

Thanks guys.
User avatar
nikhan
Mechanic
Posts: 739
Joined: Tue Apr 08, 2008 5:00 pm
Location: Melbourne

Post by nikhan »

starter motor is yeah best bet
User avatar
I8A4RE
QLD Coordinator
Posts: 9594
Joined: Mon Aug 28, 2006 5:00 pm
Location: BOOSTIN in front of you
Contact:

Post by I8A4RE »

A starter motor is not going to stop the car from running.

I suggest you check error codes first.
User avatar
demonjay
Apprentice
Posts: 57
Joined: Fri Jan 10, 2003 6:00 pm
Location: brisbane

Re: FTO conking out...

Post by demonjay »

How did you go with this Tyger?
I'm having the exact same problem occasionaly.
Randomly it will just die and then not start for 10mins or so.
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Re: FTO conking out...

Post by vipfto »

stepper motor
FTO GR-TURBO
172KW ATW @ 11PSI
User avatar
aza013
NSW Coordinator
Posts: 9089
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Re: FTO conking out...

Post by aza013 »

2nd the above ^^^^^
also check error codes as that will give us more of an idea of what is going on.
User avatar
demonjay
Apprentice
Posts: 57
Joined: Fri Jan 10, 2003 6:00 pm
Location: brisbane

Re: FTO conking out...

Post by demonjay »

Ok... pulled error code 32 (Vacuum Sensor) Where is this located? is there another name for it? i'm trying to find a reference for it in the fto tech docs.

Occasionally at highway speeds the engine will die for a fraction of a second... no lights come on or anything just a fraction of a second of no engine power.
User avatar
Bennoz
National President
Posts: 23676
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: FTO conking out...

Post by Bennoz »

Its the sensor right up the back on the firewall, about the middle. You'll see a black box with the tiniest of vacuum pipes that connects to the manifold itself. Make sure that pipe is on & ok.
User avatar
demonjay
Apprentice
Posts: 57
Joined: Fri Jan 10, 2003 6:00 pm
Location: brisbane

Re: FTO conking out...

Post by demonjay »

Thanks Bennoz and crew! :D

Located the sensor, pipe seemed to be in order but after manipulating the plastic sensor housing when the engine was running i could get the engine to cut, closer inspection of the housing revealed a hairline crack.
Image

Uploaded with ImageShack.us
I've JB welded it.... will see if holds up until i can organize a new one.
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: FTO conking out...

Post by mr-charisma »

nice one jay .. hopefully this will help tyger with his prob..
User avatar
Bennoz
National President
Posts: 23676
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: FTO conking out...

Post by Bennoz »

Good find :thumleft:

They are notorious for being damaged because of the dickhead position they're in. Everytime someone does an 'intake manifold off' service it will cop a whack.
Post Reply