Spark Plug Leads?
Moderators: IMC, Club Staff
- payaya
- Oldtimer
- Posts: 3670
- jedwabna poszewka promocja
- Joined: Sat Sep 06, 2003 5:00 pm
Spark Plug Leads?
Hey all after 150000kms my FTO is still on itsw original plugs! I mean my parents cars have them changed sometimes, was wondering if i should of the FTO?
would i be able to get a set, or measure each plug individually and change them?
thanks
would i be able to get a set, or measure each plug individually and change them?
thanks
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Spark plugs leads are like spark plugs, they do get worn out, you should change the leads when you change every second or third set of plugs.
The standard leads are 5mm, & you can get a custom made 8.5mm for around $120 (set of 3)
The standard leads are 5mm, & you can get a custom made 8.5mm for around $120 (set of 3)
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- rxboy
- Mechanic
- Posts: 748
- Joined: Thu Feb 27, 2003 6:00 pm
- Location: SE Melbourne
- Contact:
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Well according to the company who makes them, they do "wonders" for your car, but i only found them a little bit more responsive.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
-
- Grease Monkey
- Posts: 386
- Joined: Mon Aug 05, 2002 5:00 pm
- Location: Sydney
yeah you only need three because they plug into your coil packs on the front three sparkies....
what measurements are you after?
i got 7 or 8 mm leads from magnecor for about 130 or something...cant remember....i didnt notice any real difference....i just wanted to replace mine cos the stock ones werent in very good condition....and they were releasing energy quite a distance away from the leads.... maybe they were insulated enough...dunno
what measurements are you after?
i got 7 or 8 mm leads from magnecor for about 130 or something...cant remember....i didnt notice any real difference....i just wanted to replace mine cos the stock ones werent in very good condition....and they were releasing energy quite a distance away from the leads.... maybe they were insulated enough...dunno
-
- Veteran Mechanic
- Posts: 983
- Joined: Fri Apr 23, 2004 5:00 pm
- Location: Melbourne
i bought 8mm leads from Magnecor for around $130 and 6 NGK spark plugs for $72.
My recommendation for u is to change both asap.
If u want a mechanic to fit all six for u they'll charge u a fair bit (around $600) I did it myself with the help of a simple tool.
The back plugs r platinum and the front was r just a normal tip. Though u can replace the rear ones with normal tips as well.
My recommendation for u is to change both asap.
If u want a mechanic to fit all six for u they'll charge u a fair bit (around $600) I did it myself with the help of a simple tool.
The back plugs r platinum and the front was r just a normal tip. Though u can replace the rear ones with normal tips as well.