Removing front bar

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
JOeJOe
Oldtimer
Posts: 1554
jedwabna poszewka promocja
Joined: Wed Mar 29, 2006 6:00 pm

Removing front bar

Post by JOeJOe »

I followed the steps on dwaynes site, got all the bolts but it won't come out.

I think there's a bolt or something where the headlights are coz that's the part that won't budge .. any ideas?
User avatar
I8A4RE
QLD Coordinator
Posts: 9594
Joined: Mon Aug 28, 2006 5:00 pm
Location: BOOSTIN in front of you
Contact:

Post by I8A4RE »

Have you removed the fog lights. Also fom memory there may be ones under the headlight on the same lip as the ones that are near the wheel, if that makes sense
CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...
JOeJOe
Oldtimer
Posts: 1554
Joined: Wed Mar 29, 2006 6:00 pm

Post by JOeJOe »

I removed the fog lights.

I didn't see any bolts connecting the bar to the front lights thought.
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: Removing front bar

Post by rock_it »

JOeJOe wrote:I followed the steps on dwaynes site, got all the bolts but it won't come out.

I think there's a bolt or something where the headlights are coz that's the part that won't budge .. any ideas?
Off memory, I think there are 2 bolts there ... They were on my car ... Had to reach up, and could get em out as they were finger tight ... Nathan had to show me how to get to them though ...
JOeJOe
Oldtimer
Posts: 1554
Joined: Wed Mar 29, 2006 6:00 pm

Post by JOeJOe »

I'll try it again next week, it's back breaking work !!
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

Post by dstocks »

No, you shouldnt need to remove the parkers/foggies, they are bolted to the bar. You will need to unclip them from the loom though. The guide has all bolts that should be there but thats not to say that someone hasnt chucked in a couple of dodgies as well. There are 2 clips that the bar slides into near the outside of the light on each side though. To unclip, just pull bar and it should just pop out on each side. They may be a bit tight if the bar hasnt been removed before.

Good Luck[/quote]
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    Post Reply