Trans Code 42,43,44

Sugar · Post by **Sugar** » Fri Aug 22, 2008 10:59 am

42 2rd gear ratio does not meet specification
43 3th gear ratio does not meet specification
44 4th gear ratio does not meet specification

were the codes i got.
TCGPX had the problem of 1 of them, however i couldnt find the outcome.
is it safe to asume the box is dead?

Post by **I8A4RE** » Fri Aug 29, 2008 6:40 pm

have you read the manual?? If you still need the info i may be able to look it up for this week end but no promises

Post by **Bennoz** » Fri Aug 29, 2008 8:02 pm

I swear I've heard of this problem happing before, have you searched Sugar? And from memory, the actual problem codes (42,43,44) were completely different from what the problem was!

nicholas · Post by **nicholas** » Fri Aug 29, 2008 10:29 pm

What is the problem you're experiencing?

In my old box the synchro from 2nd to 3rd was stuffed and always ground when changing between at high revs, so I would've expected to get an error code of 42 and/or 43... but are you having different problems?

Storm · Post by **Storm** » Mon Sep 01, 2008 10:07 pm

It usually means the input and the output signals from the sensors are not as expected. That is, you probably have a faulty sensor and I would guess at the input sensor.