Exhaust Problems?

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
Redboost
Apprentice
Posts: 88
jedwabna poszewka promocja
Joined: Mon Jun 02, 2003 5:00 pm
Location: Sydney, NSW
Contact:

Exhaust Problems?

Post by Redboost »

My exhaust warning light on my dash lights up when I start my car yet everything seems okay - car runs fine, totally normal. Anyone know what might be the problem? The funny thing is that I've noticed it only lights up when the weather is VERY warm, which in Sydney at the moment, it is. I've changed my engine coolant cause I thought it might be a cooling problem, not to mention I've got a vented bonnet so I figured this would actually assist in cooling but after reading the owners handbook, the light says that its an exhaust problem. Also, if there is a problem, is the light supposed to remain on or does it just light up at the beginning to let you know theres a problem before turning itself off? Anyone shed any light on the problem???
"If you aren't remembered, then you never really existed"
Blaze
Apprentice
Posts: 85
Joined: Thu Sep 18, 2003 5:00 pm
Location: NSW

Post by Blaze »

R U sure it was the exhaust warning light on the dash? I've never know that light exists for FTOs. Where about the light on the dash and what colour is it? :?
Anyone knows if there is anything to do with faulty oxygen sensor on the exhaust pipe?
ruchi
Oldtimer
Posts: 1845
Joined: Tue Oct 14, 2003 5:00 pm
Location: Melbourne

Post by ruchi »

according to the manual, the exhaust warning light comes one when the temperature within the exhaust system gets too hot.

I guess the first thing to check would be the temperature sensor where ever that is.
MIVEC is My Friend :D
User avatar
Blk-Jet
Grease Monkey
Posts: 102
Joined: Tue Oct 29, 2002 6:00 pm
Location: Melbourne, VIC

Post by Blk-Jet »

The exhaust temp sensor sits at the begining of the cat.. Further towards the engine is the Lambda sensor. If your car is running ok then only check your temp sensor.

When you take out the sensor, look at the tip. There should be 2 thin steel pieces of wire joined together in a V shape. This may have come loose.
Post Reply