King springs lowring

oodLes · Post by **oodLes** » Thu Sep 06, 2007 4:04 pm

Hey all, a mate of mine recently started work at the King Springs factory, so now hes able to get me the things at a super cheap price, just wondering how low people reccomend I should take her, I was also wondering (and dstocks you'll probably be the man to answer this) if there was anything that could break, like the strut tops?

Thanks all. Also I put this in the Styling area as I don't expect huge performance from the springs, mainly looks.

FtoSam · Post by **FtoSam** » Thu Sep 06, 2007 4:11 pm

I have a set of king spring super lows... Great set of springs and the perfect height in my opinion...

doo iiittt...

manofwood · Post by **manofwood** » Thu Sep 06, 2007 4:12 pm

i rang up the kingsprings hq and they reckoned for their range to not go lower than 35mm, but i'm getting TEIN S-spec springs that drop the car nearly 50mm all round with scrubbing out apparently.
also would depend if you have a big bodykit as they tend to bottom out a lot easier than a stock body, and also the size of your wheels.

MissxFTO · Post by **MissxFTO** » Thu Sep 06, 2007 6:44 pm

im considering going to ozzy tyres hopefully before autosalon to get some new springs.. they do it cheap as all hell

Grue · Post by **Grue** » Thu Sep 06, 2007 6:51 pm

Been looking for a set of Kings round here and the price in NZ is

Might have to wait till i'm in oz next and bring a set back in my suitcase at this rate!

manofwood · Post by **manofwood** » Thu Sep 06, 2007 10:16 pm

buy them off ebay oz, $229 for 30mm drop, $239 for 35mm drop

Post by **dstocks** » Thu Sep 06, 2007 10:17 pm

I have a set of kings that have been in a car for about a month for anyone interested. I am happy with the apex springs I have so they are surplus to requirements. But when these where in my blue FTO, I was happy with them.

mr-charisma · Post by **mr-charisma** » Thu Sep 06, 2007 11:36 pm

MissxFTO wrote:im considering going to ozzy tyres hopefully before autosalon to get some new springs.. they do it cheap as all hell

If you're gonna get some, pay the extra & get some good quality ones ... this is your suspension, one of most important things on your car
As far as Ozzy Tyres go, I will never be going back there, nor recommending them to anyone ... I'll just leave it at that ... If you want my horror story just send me a PM .. Don't want to open the club up to defamation or anything

mr-charisma · Post by **mr-charisma** » Thu Sep 06, 2007 11:54 pm

Grue wrote:Been looking for a set of Kings round here and the price in NZ is

Might have to wait till i'm in oz next and bring a set back in my suitcase at this rate!

I'm sure one of the members wouldn't mind picking you up a set & shipping them over ... I should be able to get a set at Trade Prices

maggsy · Post by **maggsy** » Thu Sep 06, 2007 11:59 pm

mr-charisma wrote:I should be able to get a set at Trade Prices

REALLY

*wink wink, nudge nudge*

mr-charisma · Post by **mr-charisma** » Fri Sep 07, 2007 9:44 am

maggsy wrote:
mr-charisma wrote:I should be able to get a set at Trade Prices
REALLY

*wink wink, nudge nudge*

Yes really, lol

If theres enough people interested I'll look into getting a few sets as a bulk buy ... They will have my new Brake Rotors in about 3 weeks, so will pick up the order then if anyone is interested.

If we have 5 people it should be enough;

1.) Grue
2.) MissxFTO
3.) Maggsy
4.)
5.)

Grue · Post by **Grue** » Fri Sep 07, 2007 6:09 pm

You little beauty. Count me in.

eThix · Post by **eThix** » Fri Sep 07, 2007 11:58 pm

how much will they cost?

MissxFTO · Post by **MissxFTO** » Sat Sep 08, 2007 2:33 pm

woo im down haha!

rock_it · Post by **rock_it** » Sat Sep 08, 2007 3:03 pm

MissxFTO wrote:woo im down haha!

Heheheh ... Nice pun .... lol ...

mr-charisma · Post by **mr-charisma** » Sat Sep 08, 2007 6:25 pm

eThix wrote:how much will they cost?

Take the normal price & slash it by 20% that'll give you a rough idea.
Will find out the price for you all on monday.

maggsy · Post by **maggsy** » Sun Sep 09, 2007 12:18 am

just a few questions about them

how low will they be and how stiff are they?

thanks

mr-charisma · Post by **mr-charisma** » Sun Sep 09, 2007 11:56 pm

maggsy wrote:just a few questions about them

how low will they be and how stiff are they?

thanks

I guess as low & stiff as you want them ... If you're wondering what you will need for your car, give King Springs a call, they're based down the Gold Coast & have done work on a few FTO's before ... let them know what you want to get out of it & they will take it from there...

This is the link I sent to Sammi;
http://www.ftowa.com/html/workshop/workshopart01.html

Its a v.good article about it all ... if you're unsure about anything or want to get some advice from the pro's, give Fulcrum Suspensions a call or drop in to talk about what you're wanting to do. www.fulcrumsuspensions.com.au

Also, If you want to get them professionally installed rather than DIY, think about taking them in to Fulcrum Suspensions, they have one of the best (If not the best) reputation in Oz...

MissxFTO · Post by **MissxFTO** » Mon Sep 10, 2007 8:27 am

Yes that link = Packed full of the right info!
michael is a champion

mr-charisma · Post by **mr-charisma** » Tue Sep 11, 2007 12:35 am

Hey, Can I ask everyone to find out how low they want to go with their springs & such? I can give Fulcrum a call to get their opinion on how low to go, but I assume its all personal preference ...

e.g. I don't want to lower my car so much that I have troubles getting up driveways or scrape the bottom of my car going over bumps. Just enough to get a decent boost in handling.

When I place the order I want to just be able to say 2 x 25mm drop, 1 x 35mm drop, 3 x touching the ground etc

1.) Grue
2.) MissxFTO
3.) Maggsy (Maybe)
4.) Michael (Maybe)
5.)