Personalised Rego

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
Sparhawk
Veteran Mechanic
Posts: 1184
jedwabna poszewka promocja
Joined: Wed Oct 12, 2005 5:00 pm
Location: Wagga

Personalised Rego

Post by Sparhawk »

Well, I'll have to register the car in SA soon (moved from NSW) and want to get personalised or custom plates, but I cant think of anything cool to put on them.

Does anyone have any suggestions ?

FYI: I have a silver 1995 GPX.

I'd prefer personalised over custom just on the money basis, but there are more colours for custom. I think Black letters on a Silver plate would look ok with a silver car...
[color=blue]Death is life's way of telling you - you're fired.[/color]
Oh Bugger, my sig block pic has dropped off the host ;(
mrx
Veteran Mechanic
Posts: 1001
Joined: Fri Nov 28, 2003 6:00 pm
Location: FTO Capital of Australia
Contact:

Post by mrx »

Well, I can tell you that "FTO" is taken, because I work with the person who has it.

What about "MIVEC"? Oh wait - I've got that one.... :wink:

Do you want custom or personalised? One is a one-off cost, the other is annual. But you have more colour and size options with custom.
Sparhawk
Veteran Mechanic
Posts: 1184
Joined: Wed Oct 12, 2005 5:00 pm
Location: Wagga

Post by Sparhawk »

mrx wrote:Well, I can tell you that "FTO" is taken, because I work with the person who has it.

What about "MIVEC"? Oh wait - I've got that one.... :wink:

Do you want custom or personalised? One is a one-off cost, the other is annual. But you have more colour and size options with custom.
OK, so now I know what I cant have ROFL
I still want suggestions to what I CAN have :)

I know the costs, and doesnt phase me either way really. I think the square ?? plates (300x150) would suit the body kit quite well, and black letters on silver plate, so that would mean custom.
Something like this...
Image

Unless of course I can think of a personalised plate like FTO.095
Can you get personalised premium plates like in NSW ? I currently have FTO.01C from NSW.
[color=blue]Death is life's way of telling you - you're fired.[/color]
Oh Bugger, my sig block pic has dropped off the host ;(
mrx
Veteran Mechanic
Posts: 1001
Joined: Fri Nov 28, 2003 6:00 pm
Location: FTO Capital of Australia
Contact:

Post by mrx »

I think you can have the personalised plates the same as in NSW. These are only a one-off fee too. I had a pamhplet somewhere with all the rules etc...

I used to have FTO-100 (came with the car).

A tip though - get square for the back, but NOT for the front. Way too boxy for where the plate goes. Get slimline instead - I was going to get square front and back, but luckily the guy at Transport SA actually knew what an FTO was and recommended that I didn't.

On the square plates you can have 6 in a single line, or 5 and 2. Cannot have 3 on the second line, even if it only comes to 7 letters. So you could have:

MIVEC
V6

8K REVS

I REV

FTOGPX

MIVEC-6 (would be 1-off fee only)

EFFTOH

If I think of others, I will let you know.
User avatar
SchumieFan
Oldtimer
Posts: 5875
Joined: Thu Aug 05, 2004 5:00 pm
Location: GPS signal lost
Contact:

Post by SchumieFan »

I was gonna get [EFTEOH] but then someone bought me [4RRARI] so its still available here, i think someone has it here
Image
Spud
Grease Monkey
Posts: 288
Joined: Thu Jan 05, 2006 6:00 pm
Location: Ringwood, Victoria
Contact:

Post by Spud »

WOW square plates!!!, Seven characters!!! Why can't we do this is Victoria???

I've been racking my brain for the right plate myself but according to vplates.com.au I am only allowed 6 charaters max. Is this correct or am I missing something?
[img]http://members.optusnet.com.au/spudshouse/pics/FTO/GT4FTOsig.jpg[/img]
User avatar
Supplanter
Forum Moderator
Posts: 6422
Joined: Tue Oct 22, 2002 5:00 pm
Location: Arizona Bay
Contact:

Post by Supplanter »

Different plates for different states, unfortunately... Us Victorians only get 6 :evil:
LED ALL the things.
User avatar
TW
Apprentice
Posts: 36
Joined: Sat Feb 07, 2004 6:00 pm
Location: DARWIN

Post by TW »

I have EFTEOH here in Darwin. Takes some people a while to figure out what it means. Oh and plates only cost $140 here. :D
User avatar
Bennoz
National President
Posts: 23676
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

TW wrote:I have EFTEOH here in Darwin. Takes some people a while to figure out what it means. Oh and plates only cost $140 here. :D
And a quick doddle down to the Sturt Hwy and you have no speed limits either!! mungrels!! :P
mrx
Veteran Mechanic
Posts: 1001
Joined: Fri Nov 28, 2003 6:00 pm
Location: FTO Capital of Australia
Contact:

Post by mrx »

Bennoz wrote:
TW wrote:I have EFTEOH here in Darwin. Takes some people a while to figure out what it means. Oh and plates only cost $140 here. :D
And a quick doddle down to the Sturt Hwy and you have no speed limits either!! mungrels!! :P
Not that far from Adelaide to the unlimited zone either.... :twisted:
Sparhawk
Veteran Mechanic
Posts: 1184
Joined: Wed Oct 12, 2005 5:00 pm
Location: Wagga

Post by Sparhawk »

mrx wrote:A tip though - get square for the back, but NOT for the front. Way too boxy for where the plate goes. Get slimline instead - I was going to get square front and back, but luckily the guy at Transport SA actually knew what an FTO was and recommended that I didn't.
Good call. I was thinking that too. The slim plates look good on the front, but the one currently on the back of my car has been "trimmed" to fit in.
mrx wrote:On the square plates you can have 6 in a single line, or 5 and 2. Cannot have 3 on the second line, even if it only comes to 7 letters. So you could have:

MIVEC
V6

8K REVS

I REV

FTOGPX

MIVEC-6 (would be 1-off fee only)

EFFTOH
OK, Not according to transport SA's website, I think you mis-interpreted...

"The square custom plate format for 7 digits is a maximum of five on one line with the remaining 2 on the other line. "

http://www.transport.sa.gov.au/registra ... custom.asp

But still some good Ideas there...
Spud wrote:WOW square plates!!!, Seven characters!!! Why can't we do this is Victoria???
Well, they arent really square, (300mm x 150mm) but look more suited to the car. I didnt know we could do 7 letters in SA either till I started researching... Maybe you can in Vic but dont know it ?

But if you cant, then, well, serves you right for pinching the F1GP... ROFL
[color=blue]Death is life's way of telling you - you're fired.[/color]
Oh Bugger, my sig block pic has dropped off the host ;(
Spud
Grease Monkey
Posts: 288
Joined: Thu Jan 05, 2006 6:00 pm
Location: Ringwood, Victoria
Contact:

Post by Spud »

OK I just ordered mine yesterday so you can't have GTFTO. :wink: 8)
[img]http://members.optusnet.com.au/spudshouse/pics/FTO/GT4FTOsig.jpg[/img]
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

haahahh i'm suprise no one actually went for the rice rego of "2F2F"
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
mrx
Veteran Mechanic
Posts: 1001
Joined: Fri Nov 28, 2003 6:00 pm
Location: FTO Capital of Australia
Contact:

Post by mrx »

Sparhawk wrote:OK, Not according to transport SA's website, I think you mis-interpreted...

"The square custom plate format for 7 digits is a maximum of five on one line with the remaining 2 on the other line. "
Not wanting to be picky or anything, but:


The square custom plate format for 6 digits may be on one line.

:wink:
Sparhawk
Veteran Mechanic
Posts: 1184
Joined: Wed Oct 12, 2005 5:00 pm
Location: Wagga

Post by Sparhawk »

mrx wrote:Not wanting to be picky or anything, but:


The square custom plate format for 6 digits may be on one line.

:wink:
Who knows. Guess I'll have to go in and talk to them. :?
[color=blue]Death is life's way of telling you - you're fired.[/color]
Oh Bugger, my sig block pic has dropped off the host ;(
mrx
Veteran Mechanic
Posts: 1001
Joined: Fri Nov 28, 2003 6:00 pm
Location: FTO Capital of Australia
Contact:

Post by mrx »

That is from the website. Under the paragraph that says you can have 7 in combo of 5 and 2.

MIVEC
V6
gus
Apprentice
Posts: 85
Joined: Sun Dec 11, 2005 6:00 pm

Post by gus »

I gots me 96FTO
Post Reply