Page 1 of 2
BOOT VIBRATION
Posted: Mon Nov 15, 2004 8:36 am
by DVSJOHNNYB
Hey guyz, i read about stopping vibration inside the car using flashtac. Is it possible to use this in the boot? if not has anybody found a way of preventing it in the boot without paying big $'s for matting?? Is there anyone that can help??
THANX
JohnnyB...
Posted: Mon Nov 15, 2004 1:09 pm
by smorison
any sound proofing products will help to stop your boot vibrating
Posted: Mon Nov 15, 2004 1:14 pm
by FTOluv
the stuff (i forgot the name

) i used killed about 80% of the rattling from the boot lid and that is from just one layer. each layer will cost u around $50 for the boot lid. im gonna put a second layer soon.
with the boot, there are more panels than just the boot lid that vibrates u have subs pumping away. the rear and side panels also rattle but they are a headache to get to. Getting rid of the rattles from the boot lid is sufficient.
Posted: Mon Nov 15, 2004 4:29 pm
by G_A_V
my biggest problem was the numberplate, it sounded liek the boot, but ended up beeing the number plate. but yeah there are lots of products to try, i would stay away from any "spray on " products though
Posted: Mon Nov 15, 2004 6:03 pm
by DVSJOHNNYB
Well today i went down to my local car audio shop and they heard my car and recommended i do both the boot and the roof, as the whole car basically vibrates and those are the major areas. They quoted me $300 for the boot and $600 for the roof(installed). Now i don't know about u guys but that is a bit more then i'm willing to pay(by about $700). If anyone has any success with a product could u please help me out. It would be helpful if u's could give me a name of a few products and where i can get them.
The stuff they used is called Dynamat anyone know anything about this?
PS: FTOluv is there any way u could find out the name of the stuff u used.
THANX
JohnnyB
Posted: Mon Nov 15, 2004 6:06 pm
by G_A_V
i have heard good things about dynamat, but yeah it is very expensive
Posted: Mon Nov 15, 2004 11:30 pm
by FTOluv
u in luck, i was at work today and couldnt think straight when i posted, but i now i remember. Its called bitcherman (i think thats how u spelt it) its the stuffed used on roads. $50 will get u enough for one layer for the boot lid but thats without labour costs. my friend did it for me but its not something that hard u cant do yrself.
As for sound deadening yr roof, i wouldnt do it, its just a waste of money. u get vibration from the roof but not that much rattle noises. Once u sound deadend the boot lid u'll see a big improvement.
btw, what subs do u have in yr boot?
Posted: Tue Nov 16, 2004 7:48 am
by DVSJOHNNYB
Thanx FTOluv, i only have a sony 15" P5 in the boot at the moment. It's my amp that makes it rumble and thats an eclipse. I'm planning on getting 2 eclipse titanium comp. level subs and another monobloc. Maybe one by eclipse, crossfire, soundstream or JL.
BTW do u have any pics u could send me of your boot. i'm not quite sure what to do as i've never tried to restrict vibration only increase it.
Posted: Tue Nov 16, 2004 1:02 pm
by FTOluv
send me yr email address and i'll see if i can take a few shots.
Im running 3 x 12" clarion subs with a Viper amp.
Posted: Tue Nov 16, 2004 1:59 pm
by DVSJOHNNYB
That sounds pretty good FTOluv. My email addy is
fob_2nv@hotmail.com.
Could also help me out by establishing the important steps.
Posted: Sat Dec 04, 2004 8:16 pm
by payaya
ive got about 25-30 square feet of sound deandening materical in the boot, and on the rear side panels, still there is a clight rattle, but heaps better than stock though.
Posted: Thu Dec 16, 2004 5:46 pm
by thecook
would boot vibration effect an aftermarket fibreglass front bar thatz already got a bit of crack here and there?
Posted: Fri Dec 17, 2004 9:05 am
by FTOluv
depends on how much bass u got coming from yr boot

Posted: Sat Oct 22, 2005 4:51 pm
by FtoSam
Hey im looking to get some sound deadening done. (Look under super sound system post for reason). Now i want to do every inch of my car. roof,boot lid,boot sides, boot floor, floor pan doors, firewall,etc. What is the cheapest stuff that works? I need bulk!!
Posted: Sat Oct 22, 2005 8:51 pm
by SchumieFan
Now i want to do every inch of my car. roof,boot lid,boot sides, boot floor, floor pan doors, firewall,etc.
um... why? so u can say u have... would that really reap the rewards?
Posted: Sun Oct 23, 2005 2:55 am
by BuCkEt
Half the fun of this car is it's rough nuts ride.
You can hear everything and feel it all too.....I wouldn't want it any other way!

Posted: Sun Oct 23, 2005 4:06 pm
by FtoSam
SchumieFan wrote: Now i want to do every inch of my car. roof,boot lid,boot sides, boot floor, floor pan doors, firewall,etc.
um... why? so u can say u have... would that really reap the rewards?
Because it is on its way to being an SPL and SQ competition car.and it rattles like a bitch.Hoping for 150DB next month. so sound deadner is well needed.
Posted: Sun Oct 23, 2005 5:14 pm
by SchumieFan
fair enough... damn thats a fair amount of sound to be pumping out
hope your neighbours are friendly
Posted: Sun Oct 23, 2005 8:38 pm
by Slither
Damn staright, i've been in Mil's car and it was pumping about 138dB, i thought THAT was loud!!
Posted: Mon Oct 24, 2005 10:47 am
by FTOluv
i miss my system
Make sure u sound deaden yr entire boot area panels. That includes boot lid, rear bumper, rear side panels.
I assume that yr gonna use 2 different bass settings for SQ and SPL. For SQ make sure u have enough mid-bass and have yr front stage tuned well.