BOOT VIBRATION
Moderators: IMC, Club Staff
- DVSJOHNNYB
- Apprentice
- Posts: 31
- jedwabna poszewka promocja
- Joined: Wed Oct 27, 2004 5:00 pm
BOOT VIBRATION
Hey guyz, i read about stopping vibration inside the car using flashtac. Is it possible to use this in the boot? if not has anybody found a way of preventing it in the boot without paying big $'s for matting?? Is there anyone that can help??
THANX
JohnnyB...
THANX
JohnnyB...
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
-
- Veteran Mechanic
- Posts: 983
- Joined: Fri Apr 23, 2004 5:00 pm
- Location: Melbourne
the stuff (i forgot the name
) i used killed about 80% of the rattling from the boot lid and that is from just one layer. each layer will cost u around $50 for the boot lid. im gonna put a second layer soon.
with the boot, there are more panels than just the boot lid that vibrates u have subs pumping away. the rear and side panels also rattle but they are a headache to get to. Getting rid of the rattles from the boot lid is sufficient.

with the boot, there are more panels than just the boot lid that vibrates u have subs pumping away. the rear and side panels also rattle but they are a headache to get to. Getting rid of the rattles from the boot lid is sufficient.
- DVSJOHNNYB
- Apprentice
- Posts: 31
- Joined: Wed Oct 27, 2004 5:00 pm
Well today i went down to my local car audio shop and they heard my car and recommended i do both the boot and the roof, as the whole car basically vibrates and those are the major areas. They quoted me $300 for the boot and $600 for the roof(installed). Now i don't know about u guys but that is a bit more then i'm willing to pay(by about $700). If anyone has any success with a product could u please help me out. It would be helpful if u's could give me a name of a few products and where i can get them.
The stuff they used is called Dynamat anyone know anything about this?
PS: FTOluv is there any way u could find out the name of the stuff u used.
THANX
JohnnyB
The stuff they used is called Dynamat anyone know anything about this?
PS: FTOluv is there any way u could find out the name of the stuff u used.
THANX
JohnnyB
-
- Veteran Mechanic
- Posts: 983
- Joined: Fri Apr 23, 2004 5:00 pm
- Location: Melbourne
u in luck, i was at work today and couldnt think straight when i posted, but i now i remember. Its called bitcherman (i think thats how u spelt it) its the stuffed used on roads. $50 will get u enough for one layer for the boot lid but thats without labour costs. my friend did it for me but its not something that hard u cant do yrself.
As for sound deadening yr roof, i wouldnt do it, its just a waste of money. u get vibration from the roof but not that much rattle noises. Once u sound deadend the boot lid u'll see a big improvement.
btw, what subs do u have in yr boot?
As for sound deadening yr roof, i wouldnt do it, its just a waste of money. u get vibration from the roof but not that much rattle noises. Once u sound deadend the boot lid u'll see a big improvement.
btw, what subs do u have in yr boot?
- DVSJOHNNYB
- Apprentice
- Posts: 31
- Joined: Wed Oct 27, 2004 5:00 pm
Thanx FTOluv, i only have a sony 15" P5 in the boot at the moment. It's my amp that makes it rumble and thats an eclipse. I'm planning on getting 2 eclipse titanium comp. level subs and another monobloc. Maybe one by eclipse, crossfire, soundstream or JL.
BTW do u have any pics u could send me of your boot. i'm not quite sure what to do as i've never tried to restrict vibration only increase it.
BTW do u have any pics u could send me of your boot. i'm not quite sure what to do as i've never tried to restrict vibration only increase it.
- DVSJOHNNYB
- Apprentice
- Posts: 31
- Joined: Wed Oct 27, 2004 5:00 pm
That sounds pretty good FTOluv. My email addy is fob_2nv@hotmail.com.
Could also help me out by establishing the important steps.
Could also help me out by establishing the important steps.
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
Because it is on its way to being an SPL and SQ competition car.and it rattles like a bitch.Hoping for 150DB next month. so sound deadner is well needed.SchumieFan wrote:um... why? so u can say u have... would that really reap the rewards?Now i want to do every inch of my car. roof,boot lid,boot sides, boot floor, floor pan doors, firewall,etc.
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
-
- Veteran Mechanic
- Posts: 983
- Joined: Fri Apr 23, 2004 5:00 pm
- Location: Melbourne