APEX SPRINGS

jester · Post by **jester** » Sun Sep 19, 2004 8:33 pm

Hey peeps

I was looking to buy these springs to lower my car from a local dealer.
I really just want to by only springs 4 now.

I was just wondering if i put in these springs will i NEED to get shocks etc as well.
The state of my stock shocks are pretty good shape.

The springs lower the car by 45mm front and 25mm rear.
Anyone with this config got a pic of their ride so i can have a look-see?

Anyway thanx in advance.......

http://www.camskill.co.uk/products.php? ... &_Steering

Post by **smorison** » Mon Sep 20, 2004 10:47 am

if you've got stock shocks and you've done more than 70k i'd say replace them anyway...

andie066 · Post by **andie066** » Tue Sep 21, 2004 2:01 am

i got apexi springs on my car , the handling is great.

jester · Post by **jester** » Tue Sep 21, 2004 10:21 pm

thanx steve- thought bout doing this too...

oh and andie did u change your shocks too??
whats the lowering config mm? rear front?

andie066 · Post by **andie066** » Wed Sep 22, 2004 2:03 pm

sorry for the late reply.. but yeah.. umm nar just the springs.. u dont need to change the shocks.. the people at hyper-tech said that fot the fto the apexi springs are the best.. evern better then tien, and it works good with standard shocks, kirby has also got his installed now, i think its pretty good.. they lowert the back to 1 finger between tire and the car, and the front 2 fingers, and also they are pretty hard so u feel the road while u drive hehe i like it so yeah.. its not too low either but low enough

ruchi · Post by **ruchi** » Wed Sep 22, 2004 2:15 pm

better in what way?

hnm738 · Post by **hnm738** » Wed Sep 22, 2004 6:05 pm

hi
im just wandering the height of a standard fto is 15cm from the lowest

and i now have a veilside front bar so my height is roughly 13cms

so if i lowerd my car with apex spring does that mean i will be under the height limit?

do i need to get a custom set of spring? or is there a brand that i could use?

ruchi · Post by **ruchi** » Wed Sep 22, 2004 6:18 pm

...and then you sit in the car and it drops by???

Remember the legal limit is in its driven state (passengers, luggage etc.)

paladin · Post by **paladin** » Wed Sep 22, 2004 10:50 pm

my cars done 110k's but the suspensions stilly pretty good! so i was woundering how can i tell if they have been replaced?? what do the stockers look like?

jester · Post by **jester** » Thu Sep 23, 2004 1:10 am

Mite be worth getting a mech/suspensionplace to check that out, paladin

andie: hypertech is where im planning 2 buy the springs from.
Spoke to arnold there already. Its nota big suprise that he is pushing APEX gear, he's a distributor for it.

Im really keen to get them though, after ive heard your personal experience sounds like uve had good run with them.

how much did u get them for ? 300ish?? fitting?

oh and do u have stock wheels on your car or aftermarket rims? Ive got stock wheels....
A pic of your car would be great!
(PM coming your way)

thecook · Post by **thecook** » Thu Sep 23, 2004 3:43 am

hey shannon, i got mine from hypertech too... i got the exact same springs as andie... i'd recommend them for sure!!!

jester · Post by **jester** » Sun Sep 26, 2004 3:25 am

Hey peeps

Just outta curiousty....

How many of yall would be interested a set of these springs??
Small group buy? mite bring the price down a bit...

PM or let know here.