Page 1 of 1

Jap import vs Australian specs

Posted: Wed Jan 25, 2012 5:43 pm
by gabs
MY knowledge is that an fto imported from japan (Jap specs) is better than an fto with australian specs. Although i have been told that with certain cars such as rx7 australian specs are preferred over jap imports. Any thoughts?

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 5:49 pm
by Taz
There is no 'Australian spec' FTO as far as im aware, it was never dealer delivered in Australia, you had to pretty much import one yourself back in the day which was pretty tricky.
The only thing i can think of what Aus spec could be is when it is imported it has to be stock standard, however again this wouldnt change anything to an 'Aus spec'
Perhaps clarify a little more if i am missing the point here, otherwise the answer is nothing, as there is no 'Aus spec'
Hope that helps :D

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 5:51 pm
by Eltnot
Yep, All FTO's are Grey Imports in Australia.

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 6:21 pm
by bass_twitch
Taz wrote: there is no 'Aus spec'
^^ This

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 7:22 pm
by Kustom
As above.

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 8:01 pm
by SchumieFan
as above ^these 2^

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 9:08 pm
by Astron_Boy
To throw a spanner in here, the Aus FTO weighs more.
10points to whoever figures this one out.

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 9:10 pm
by Eltnot
Astron_Boy wrote:To throw a spanner in here, the Aus FTO weighs more.
10points to whoever figures this one out.
Because they don't have skinny Japanese guys driving them anymore?

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 9:22 pm
by SchumieFan
Eltnot wrote:
Astron_Boy wrote:To throw a spanner in here, the Aus FTO weighs more.
10points to whoever figures this one out.
Because they don't have skinny Japanese guys driving them anymore?
ROR...

because of the child seat anchors that get fitted on compliance... and the dimmer

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 9:23 pm
by Astron_Boy
SchumieFan wrote:
Eltnot wrote:
Astron_Boy wrote:To throw a spanner in here, the Aus FTO weighs more.
10points to whoever figures this one out.
Because they don't have skinny Japanese guys driving them anymore?
ROR...

because of the child seat anchors that get fitted on compliance... and the dimmer
on the right track, but no donut

And sorry Elt, but no, I weigh as much as a skinny Japanese guy, lol

As does schumie. ROR

Re: Jap import vs Australian specs

Posted: Wed Jan 25, 2012 11:28 pm
by aza013
If you read between the lines of what astronboy has said there are some hints there :D .

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 6:38 am
by Bennoz
Because Aus spec ones have kegs in them :cheers:

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 7:06 am
by payaya
Aren't bars welded into the door for compliance?

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 10:09 am
by aza013
Bennoz wrote:Because Aus spec ones have kegs in them :cheers:
that there is a win :twisted: .

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 2:59 pm
by Astron_Boy
aza013 wrote:
Bennoz wrote:Because Aus spec ones have kegs in them :cheers:
that there is a win :twisted: .
extremely, lol
payaya wrote:Aren't bars welded into the door for compliance?
indeed they do! 10 points.

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 3:06 pm
by Eltnot
Bennoz wrote:Because Aus spec ones have kegs in them :cheers:
Crap, mine doesn't have that upgrade. Where can I get it installed? At the bonfire?

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 3:35 pm
by BearOnFire
Eltnot wrote:
Bennoz wrote:Because Aus spec ones have kegs in them :cheers:
Crap, mine doesn't have that upgrade. Where can I get it installed? At the bonfire?
Hmm, any chance fitting a wine barrel if we were to remove the rear seat? :idea:

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 5:33 pm
by Technikhaus
Hmm I wonder if NZ has that?

Re: Jap import vs Australian specs

Posted: Thu Jan 26, 2012 10:51 pm
by gabs
ok fair enough guys thanks