Page 1 of 2

pipe reducer

Posted: Sun Sep 04, 2011 8:06 pm
by Taiwo
Does anyone know where i can get a pipe reducer from?

Re: pipe reducer

Posted: Sun Sep 04, 2011 11:15 pm
by Connor_1994
ebay, supercheap, repco maybe,

definately any muffler shop, or steel pipe dealer,
what size are you after?

Re: pipe reducer

Posted: Mon Sep 05, 2011 1:33 pm
by Taiwo
am after a 3" or 4"

Re: pipe reducer

Posted: Mon Sep 05, 2011 1:35 pm
by Astron_Boy
What's it for?
If exhaust, then a general exhaust shop.

If intake, then get a silicon piece off ebay for cheap.

Re: pipe reducer

Posted: Mon Sep 05, 2011 1:46 pm
by Taiwo
it's for intake. intake are still legal for p platers in queenslands right?

Re: pipe reducer

Posted: Mon Sep 05, 2011 4:21 pm
by Kustom
as long as its boxed you'll be fine

Re: pipe reducer

Posted: Mon Sep 05, 2011 5:55 pm
by Connor_1994
mines not, lol

they never check under my bonnet though, i rarely evan get pulled over,
just make sure no matter what that the pipe is somehow connected to the chassis and wont bounce etc if pushed on,
thats a big no no, haha

pipe reducer

Posted: Mon Sep 05, 2011 7:07 pm
by vandit
Hey mate let me know I can put the pods inside the stock airbox it's 30 min job you'll need a galant or evo3 air flow meter I've done mine big difference

Re: pipe reducer

Posted: Mon Sep 05, 2011 8:04 pm
by Rob Furniss
You're all joking right?
(pardon my ignorance and please enlighten me)

Re: pipe reducer

Posted: Mon Sep 05, 2011 8:18 pm
by I8A4RE
Connor_1994 wrote: just make sure no matter what that the pipe is somehow connected to the chassis and wont bounce etc if pushed on,
thats a big no no, haha
This is the qld law for open license. Must be secure and not floating.

Re: pipe reducer

Posted: Mon Sep 05, 2011 8:56 pm
by Connor_1994
yeah, floating is bbaadddd, hahaha,
mine dont float no more,


and sorry, but i dont understand rob, what are we joking about?

Re: pipe reducer

Posted: Tue Sep 06, 2011 10:39 am
by Taiwo
vandit wrote:Hey mate let me know I can put the pods inside the stock airbox it's 30 min job you'll need a galant or evo3 air flow meter I've done mine big difference
where do i get a galant or evo 3 airflow meter

Re: pipe reducer

Posted: Tue Sep 06, 2011 11:01 am
by Astron_Boy
Taiwo wrote:
vandit wrote:Hey mate let me know I can put the pods inside the stock airbox it's 30 min job you'll need a galant or evo3 air flow meter I've done mine big difference
where do i get a galant or evo 3 airflow meter
ooh, this sounds interesting.

Re: pipe reducer

Posted: Tue Sep 06, 2011 12:06 pm
by Rob Furniss
Connor_1994 wrote:yeah, floating is bbaadddd, hahaha,
mine dont float no more,


and sorry, but i dont understand rob, what are we joking about?
That the police are so interested in your intake setup, I didn't realise they were so strict.

Re: pipe reducer

Posted: Tue Sep 06, 2011 12:11 pm
by Bennoz
Rob Furniss wrote:
Connor_1994 wrote:yeah, floating is bbaadddd, hahaha,
mine dont float no more,


and sorry, but i dont understand rob, what are we joking about?
That the police are so interested in your intake setup, I didn't realise they were so strict.
LOL then dont get caught with a decat pipe, that one can earn ya jail time!

pipe reducer

Posted: Tue Sep 06, 2011 12:11 pm
by bass_twitch
Rob Furniss wrote:
Connor_1994 wrote:yeah, floating is bbaadddd, hahaha,
mine dont float no more,


and sorry, but i dont understand rob, what are we joking about?
That the police are so interested in your intake setup, I didn't realise they were so strict.
Welcome to Australia :lol:
nsw is well known for being the strictest also. And the rta fine you a pretty penny if they defect you!

Re: pipe reducer

Posted: Tue Sep 06, 2011 2:07 pm
by Rob Furniss
Oh shite, I will have to be careful then when I finally do get an fto.
What about something like remote mounting the brake reservoir - would they not like this or could I get around it with putting a mod form in (and getting it approved of course)?

Re: pipe reducer

Posted: Tue Sep 06, 2011 2:18 pm
by Bennoz
Just about everything we do is illegal, but you can have modifications 'engineered' so's they are legal ;)

Re: pipe reducer

Posted: Tue Sep 06, 2011 4:37 pm
by Rob Furniss
Bennoz wrote:Just about everything we do is illegal, but you can have modifications 'engineered' so's they are legal ;)
Ah ok, just need a friendly registered engineer or something?

Re: pipe reducer

Posted: Tue Sep 06, 2011 7:36 pm
by Connor_1994
meh, just dont get caught, youl be fine lol

learn to hide things haha,

and yeah, pretty much everything is illegal, lol (: