pipe reducer

Taiwo · Post by **Taiwo** » Sun Sep 04, 2011 8:06 pm

Does anyone know where i can get a pipe reducer from?

Connor_1994 · Post by **Connor_1994** » Sun Sep 04, 2011 11:15 pm

ebay, supercheap, repco maybe,

definately any muffler shop, or steel pipe dealer,
what size are you after?

Taiwo · Post by **Taiwo** » Mon Sep 05, 2011 1:33 pm

am after a 3" or 4"

Astron_Boy · Post by **Astron_Boy** » Mon Sep 05, 2011 1:35 pm

What's it for?
If exhaust, then a general exhaust shop.

If intake, then get a silicon piece off ebay for cheap.

Taiwo · Post by **Taiwo** » Mon Sep 05, 2011 1:46 pm

it's for intake. intake are still legal for p platers in queenslands right?

Kustom · Post by **Kustom** » Mon Sep 05, 2011 4:21 pm

as long as its boxed you'll be fine

Connor_1994 · Post by **Connor_1994** » Mon Sep 05, 2011 5:55 pm

mines not, lol

they never check under my bonnet though, i rarely evan get pulled over,
just make sure no matter what that the pipe is somehow connected to the chassis and wont bounce etc if pushed on,
thats a big no no, haha

vandit · Post by **vandit** » Mon Sep 05, 2011 7:07 pm

Hey mate let me know I can put the pods inside the stock airbox it's 30 min job you'll need a galant or evo3 air flow meter I've done mine big difference

Rob Furniss · Post by **Rob Furniss** » Mon Sep 05, 2011 8:04 pm

You're all joking right?
(pardon my ignorance and please enlighten me)

Post by **I8A4RE** » Mon Sep 05, 2011 8:18 pm

Connor_1994 wrote: just make sure no matter what that the pipe is somehow connected to the chassis and wont bounce etc if pushed on,
thats a big no no, haha

This is the qld law for open license. Must be secure and not floating.

Connor_1994 · Post by **Connor_1994** » Mon Sep 05, 2011 8:56 pm

yeah, floating is bbaadddd, hahaha,
mine dont float no more,

and sorry, but i dont understand rob, what are we joking about?

Taiwo · Post by **Taiwo** » Tue Sep 06, 2011 10:39 am

vandit wrote:Hey mate let me know I can put the pods inside the stock airbox it's 30 min job you'll need a galant or evo3 air flow meter I've done mine big difference

where do i get a galant or evo 3 airflow meter

Astron_Boy · Post by **Astron_Boy** » Tue Sep 06, 2011 11:01 am

Taiwo wrote:
vandit wrote:Hey mate let me know I can put the pods inside the stock airbox it's 30 min job you'll need a galant or evo3 air flow meter I've done mine big difference
where do i get a galant or evo 3 airflow meter

ooh, this sounds interesting.

Rob Furniss · Post by **Rob Furniss** » Tue Sep 06, 2011 12:06 pm

Connor_1994 wrote:yeah, floating is bbaadddd, hahaha,
mine dont float no more,

and sorry, but i dont understand rob, what are we joking about?

That the police are so interested in your intake setup, I didn't realise they were so strict.

Post by **Bennoz** » Tue Sep 06, 2011 12:11 pm

Rob Furniss wrote:
Connor_1994 wrote:yeah, floating is bbaadddd, hahaha,
mine dont float no more,

and sorry, but i dont understand rob, what are we joking about?
That the police are so interested in your intake setup, I didn't realise they were so strict.

LOL then dont get caught with a decat pipe, that one can earn ya jail time!

bass_twitch · Post by **bass_twitch** » Tue Sep 06, 2011 12:11 pm

Rob Furniss wrote:
Connor_1994 wrote:yeah, floating is bbaadddd, hahaha,
mine dont float no more,

and sorry, but i dont understand rob, what are we joking about?
That the police are so interested in your intake setup, I didn't realise they were so strict.

Welcome to Australia

nsw is well known for being the strictest also. And the rta fine you a pretty penny if they defect you!

Rob Furniss · Post by **Rob Furniss** » Tue Sep 06, 2011 2:07 pm

Oh shite, I will have to be careful then when I finally do get an fto.
What about something like remote mounting the brake reservoir - would they not like this or could I get around it with putting a mod form in (and getting it approved of course)?

Post by **Bennoz** » Tue Sep 06, 2011 2:18 pm

Just about everything we do is illegal, but you can have modifications 'engineered' so's they are legal

Rob Furniss · Post by **Rob Furniss** » Tue Sep 06, 2011 4:37 pm

Bennoz wrote:Just about everything we do is illegal, but you can have modifications 'engineered' so's they are legal

Ah ok, just need a friendly registered engineer or something?

Connor_1994 · Post by **Connor_1994** » Tue Sep 06, 2011 7:36 pm

meh, just dont get caught, youl be fine lol

learn to hide things haha,

and yeah, pretty much everything is illegal, lol (:

FTO AUSTRALIA

pipe reducer

pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer

Re: pipe reducer