Page 1 of 13

7th + 8th August, DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 8:43 pm
by BorepYano
Just a thread to start hammering out ideas for the DIY day.

So far from what I can remember out of our chat in the car park, and what I can think of.

thinking about doing it on a Saturday arvo, and sunday. (a lot of details have to be worked out there obviously)
we should have a list of things we want to do to the cars.
it should be pretty much asap.
we'll need a list of what tools we are all bringing.

well, since we are going to have it at pete's so it's kind of up to him, so.... pete, when would be a good time for you to have a bunch of people over?

inputs and ideas, please. :)

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 8:45 pm
by Kustom
Hmmm... more days off work... Sweeeeet... I knew i had these hours here for a reason....

Just an idea -> Maybe would be best to do it not in the afternoon as... well, the sun is just easier to work with then the moon...
And some of us will have to drive home after... so yeah.. but yeah... idk

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 9:42 pm
by I8A4RE
Yeah definitly as early as possible.

What we need is to start a list of who is coming and what you want to accomplish. Then we can plan tools and some sort of time frame, eg whether we need to do t over two nights or one day will suffice.

So put down your name and what you want done.

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 9:54 pm
by Kustom
I8A4RE wrote:Yeah definitly as early as possible.

What we need is to start a list of who is coming and what you want to accomplish. Then we can plan tools and some sort of time frame, eg whether we need to do t over two nights or one day will suffice.

So put down your name and what you want done.
Alright i'll start it off....

I8A4RE = Finish off Project Lucifer

:lol:

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 10:27 pm
by Fto_Jason
8O Well, i don't know if you were being serious about that stef lol but lets start a little list, copy paste it and add what you want done.


1. Fto_Jason (Jason)
- Angel Eye halo's put on my car :)
- Sub installation (Most leads are run to the battery and stuff, just need to plug it in and run the leads to the speakers)

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 10:36 pm
by Kustom
Wasn't serious at all, I just didn't have anything to list lol... We need a fan forced oven for the lights, i hope pete has a big enough one to fit a headlight in... and is willing to put plastic in there :lol:

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 10:45 pm
by Fto_Jason
Oh wow lol cant say i realized that but pete!?

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 11:25 pm
by Sophia
Sophia -
halos
stereo install
re tint tail lights
tint indicators
fix fog lights
find out what is squecking/scratching
respray my door trims

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 11:30 pm
by Kustom
Sophia wrote:Sophia -
halos
stereo install
re tint tail lights
tint indicators
fix fog lights
find out what is squecking/scratching
respray my door trims
Fix fog lights, well the thing you screw your screw into, whatever you wanna call it is bent.. so that depends .. I thought you are gonna get a new bar... that will fix that issue, if not well... i dunno..
The rest sounds reasonably do-able... i have some tint left over from my red FTO.

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 11:41 pm
by Sophia
I will by a new can of tint if there isnt enough :)

Yeah will be buying a new bar so that solves that I guess

Re: DIY Day in Toowoomba

Posted: Sun Jun 06, 2010 11:59 pm
by BorepYano
stef, i think most new bars you buy dont come with the mounting thingos, and with any luck we can just bash sophia's back into shape.

fair call on the sun light thing, ok, let's make it early, but with that said... how early can sophia get there lol

and... are we camping in someone's front yard over night? lol

I'm not touching the angel eyes. >.< lol

What I want done:
I'll probably need my interior repainted, and cleaned.
put my H brace on.
fix the short in my stereo
fix the fog lights switch
maybe some rewiring.
and if pete has a high pressure water thingo, i can also degrease my engine bay.

What I can do
if anyone need any small fibreglass repairs i might be able to help. (sophia's rear bar is a bit too much for me to do there lol)
i'm getting pretty good at taking the interior out now lol
order pizza and drink lol

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:03 am
by Sophia
lol your jusr scared of a challenge when It comes to trying to fix my rear bar :P

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:06 am
by Fto_Jason
Haha.. Well if we are painting interiors i might join you with that one Yano :P Oh and looks like first day will be spent on Sophia's car

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:12 am
by Kustom
BorepYano wrote: I'm not touching the angel eyes. >.< lol
DW Sophia we'll just make him do eeeet. :lol:
BorepYano wrote: order pizza and drink lol - t
his is a 2 person job and i will be assisting you on it.

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:16 am
by BorepYano
stef, can i "borrow" your spare manifold thingo next time i see you?
yes i'm too lazy to sms you, because my phone is not within reach
Sophia wrote:lol your jusr scared of a challenge when It comes to trying to fix my rear bar :P
no, just scared of a challenge when it comes to your car, jk jk
i didn't get a good look at it, i'm sure it's do-able, but i might need to go over it a few times, and we just dont have the time there for it to set.

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:17 am
by Kustom
BorepYano wrote:stef, can i "borrow" your spare manifold thingo next time i see you?
yes i'm too lazy to sms you, because my phone is not within reach
Sophia wrote:lol your jusr scared of a challenge when It comes to trying to fix my rear bar :P
no, just scared of a challenge when it comes to your car, jk jk
i didn't get a good look at it, i'm sure it's do-able, but i might need to go over it a few times, and we just dont have the time there for it to set.
Yeah dude no worries take it away from my garage.

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:19 am
by BorepYano
stef, i'll help and talk ppl through the angel eye stuff, but i'm just not doing it, hate being responsible for other ppl's cars lol
and you can join me on the job, you order pizza, i drink. problem solved :D

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:48 am
by phunkydude
Guess i gonna join the diy as well.

Few things that i wish to do,
-sand the headlights (by hand?)
-paint internal door handle cover
-probably amp my stereo

I can help if anyone need a hand. (eg. need a hand to hold something,etc :p )

Btw, to get the angel halo in, need to get the front bar off before getting to the headlights right?
Thought of getting angel halo for mine but seems too much hassle to get the front bar off.

& Sophia getting another bozz front? the ones with the mid bar removed?

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:48 am
by Kustom
BorepYano wrote:stef, i'll help and talk ppl through the angel eye stuff, but i'm just not doing it, hate being responsible for other ppl's cars lol
and you can join me on the job, you order pizza, i drink. problem solved :D
Do you want that intake manifold yang?

Re: DIY Day in Toowoomba

Posted: Mon Jun 07, 2010 12:49 am
by Kustom
phunkydude wrote:Guess i gonna join the diy as well.

Few things that i wish to do,
-sand the headlights (by hand?)
-paint internal door handle cover
-probably amp my stereo

I can help if anyone need a hand. (eg. need a hand to hold something,etc :p )

Btw, to get the angel halo in, need to get the front bar off before getting to the headlights right?
Thought of getting angel halo for mine but seems too much hassle to get the front bar off.

& Sophia getting another bozz front? the ones with the mid bar removed?
Yep for the angel eyes, Front bar has to come off, then headlights, then baked in an oven then install halo's then baked in oven back together then back in car then put front bar back up and hope its all good.... Very much of a hassle :lol:

Sand headlights, good idea i'm sure a lot of us need to do this.