Check these babies out.....

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
User avatar
dstocks
National Vice President
Posts: 9529
jedwabna poszewka promocja
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

Check these babies out.....

Post by dstocks »

Heres something I havent seen before:

http://page8.auctions.yahoo.co.jp/jp/auction/h131490341
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    User avatar
    J
    Oldtimer
    Posts: 2182
    Joined: Fri Apr 18, 2008 5:00 pm
    Location: Sydney West
    Contact:

    Post by J »

    they are the late styled euro project f's.... Which apparently have been fixed of the water issues.

    They don't look bad but they hardly look different from stock from afar.

    How much would these cost to land them in australia dwayne?
    User avatar
    dstocks
    National Vice President
    Posts: 9529
    Joined: Fri Jun 24, 2005 5:00 pm
    Location: Utopia
    Contact:

    Post by dstocks »

    under $800, maybe as low as $700 at a guess (which is fairly cheap given people have paid upwards of $1500 for Series 1 Project F's).

    Notice they are LED as well....
    Complete FTO (http://www.completefto.com.au/completefto.asp)
      Image
      If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
      User avatar
      col2560
      Mechanic
      Posts: 434
      Joined: Fri Jun 06, 2008 5:00 pm
      Location: seymour, tennessee, usa
      Contact:

      Post by col2560 »

      what's the control box thingy?? are they legal in Aust. ?
      my motto; do nothing, then rest.
      User avatar
      Astron_Boy
      Trolling Gen Y
      Posts: 8400
      Joined: Sun May 27, 2007 5:00 pm
      Location: Wine Country NSW
      Contact:

      Post by Astron_Boy »

      I would perhaps suspect the controller is either.
      A releay controller for the indicators, as the LEDs draw less current, cause relay to think globe is not operative.
      Or
      An over ride to make the lights do something fancy.

      Pretty cool either way.
      Don't like the venetian look over the reverse light section though.
      Image
      User avatar
      nicholas
      Veteran Mechanic
      Posts: 1091
      Joined: Thu May 17, 2007 5:00 pm
      Location: Hills, NSW

      Post by nicholas »

      If only mitsu would make some stock taillights but with LED, i'd snap them up in a second!
      Resident Asshole.
      Post Reply