FS: Any engine Parts. Make offers on anything.

Private Sales Only - No Traders Allowed!
Please Post:
* Picture if possible
* Details
* Price
* State

Moderators: IMC, Club Staff

Post Reply
User avatar
FtoSam
Oldtimer
Posts: 3924
jedwabna poszewka promocja
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

FS: Any engine Parts. Make offers on anything.

Post by FtoSam »

Okay, had a few questions about this so i thought i'd post it up.

My engine is being stripped... getting some parts off it.

So far looks like the following:
(now included locations)

2x MIVEC Covers (1x Silver 1x Black) $25ea -Gold Coast
Silver one is in BlueImage


1x GPX Alternator ($450 Reco april last year) - $300 -GC

1x Starter Motor 2nd hand $150 - Taree

1x Intake Manifold $80 -GC
RED
Image

1x Engine. (can strip down if u like. Heads are fine. Only prob is the rings are gone.) - GC


1x Tip Gearbox (4sp) and computer $200 - Taree NSW
1x GR ECU $50 - Taree NSW
Image

1x Custom Air intake pipe (GPX) - Bris
Image

1x Custom 2.5" High Flow cat twin 4" cannon Exhaust System $500+ -Bris
MYF70 Plates NOT MSF70..
Image
Image
Image



Other stuff will come up as i realise i have spares from the conversion.

Okay... Any engine parts except the starter motor are available... Anything... you name it... just name the part and give me a price..
Last edited by FtoSam on Mon Jun 04, 2007 3:16 pm, edited 4 times in total.
Image

If you need good deal on photography, let me know.
Top
User avatar
Richy
Mechanic
Posts: 517
Joined: Mon Dec 18, 2006 6:00 pm
Location: Sydney

Post by Richy »

Interested to get these as spare...

1x GPX Alternator ($450 Reco april last year) - $300

1x Starter Motor Just finished recondition $400

1x Tip Gearbox (4sp) and computer $200

how much would they cost for new ones..??

how old / how many kms have they done??

and

as i am thinking to keep them as spare...will use them when the ones in my car break. Would they be alrite to just stay in the garage for long..., and once fitted on, would u have any rough idea on how long (in rough km's) they will then last....
Top
eThix
Veteran Mechanic
Posts: 1046
Joined: Mon Feb 12, 2007 6:00 pm
Location: Brisbane

Post by eThix »

Pm for intake :P
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

Heres the only pic of the intake i could find.. This is how it was originally made: (my 1st Engine too....)
Image

I drew a dodgy MS Paint drawing to try and show where it now goes. It sits directly over the CAI hole now.
Image

If you need good deal on photography, let me know.
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

Richy wrote:Interested to get these as spare...

1x GPX Alternator ($450 Reco april last year) - $300

1x Starter Motor Just finished recondition $400

1x Tip Gearbox (4sp) and computer $200

how much would they cost for new ones..??

how old / how many kms have they done??

and

as i am thinking to keep them as spare...will use them when the ones in my car break. Would they be alrite to just stay in the garage for long..., and once fitted on, would u have any rough idea on how long (in rough km's) they will then last....

1x GPX Alternator (Maybe done about 25,000km. new i've had prices between $1400-1800) Should last a fair while, depending on your use. I've had a perfect battery the entire time, and no subs with this untill a month or two ago.. I would assume you should get years worth out of it.

1x Starter Motor Just finished recondition (lucky if its done 1,000km) (New $1100-$1400) Considering its been freshly rebuilt should last longer than u have your car. Standard one lasted 12 years... i would expect the same out of this

1x Tip Gearbox (4sp) and computer .NFI on new price or Kms as it has come off my halfcut i got.

If you take all 3 u can have the lot for $750.

Richy, where r u located? The Tip box is on Mid-North coast of NSW, the rest is with me in brisbane
Image

If you need good deal on photography, let me know.
Top
User avatar
onnzo
Grease Monkey
Posts: 288
Joined: Sun Aug 08, 2004 5:00 pm
Location: Victoria

Post by onnzo »

Are you willing to separate the alternator tensioner pulley? I have a GR but I would suspect that the gr and gpx use the same one. Will have to check caps.

Mike
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

Sure mate... willing to seperate everything
Image

If you need good deal on photography, let me know.
Top
User avatar
Richy
Mechanic
Posts: 517
Joined: Mon Dec 18, 2006 6:00 pm
Location: Sydney

Post by Richy »

hi sam

thanks for the info...

i am located in Sydney Mascot (near airport)....seems like freight cost would be an issue....sine they are all over aus...(far out man, u should run a "Sam's FTO Wrecking & Spare")

any idea on postage??

thanks.

Richy
Top
eThix
Veteran Mechanic
Posts: 1046
Joined: Mon Feb 12, 2007 6:00 pm
Location: Brisbane

Post by eThix »

:( no intake pipe Sam can't find it.... any one else got a spare one? :cry:
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

Yeah so sorry about that mate... I remember now something about it.. i may have sold it ages ago... cant remember...

Actually yep... now i remember... Daryll bought it from me... Damn im forgetfull... If u get desperate u can get one made up for $100-150...
Image

If you need good deal on photography, let me know.
Top
eThix
Veteran Mechanic
Posts: 1046
Joined: Mon Feb 12, 2007 6:00 pm
Location: Brisbane

Post by eThix »

yeah i can ebay all the parts for $100 inc shipping :)
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

Not quite understanding you there mate...

do u mean $100 for all the parts? If so... uhhh no...
Image

If you need good deal on photography, let me know.
Top
User avatar
onnzo
Grease Monkey
Posts: 288
Joined: Sun Aug 08, 2004 5:00 pm
Location: Victoria

Post by onnzo »

FtoSam wrote:Sure mate... willing to seperate everything
Hi - sorry but I have sourced a new tensioner pulley. Probably best to buy new with these things. Pajeros and starwagons (some of them) use the same one!

Thanks anyway.

Mike
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

No worries... Prepare to see ebay flooded with FTO parts... hehehe
Image

If you need good deal on photography, let me know.
Top
eThix
Veteran Mechanic
Posts: 1046
Joined: Mon Feb 12, 2007 6:00 pm
Location: Brisbane

Post by eThix »

FtoSam wrote:Not quite understanding you there mate...

do u mean $100 for all the parts? If so... uhhh no...
lol Yeah the guys from UK did it

Heres a pic
Image

and yeah it will it will have to do for now :)
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

eThix wrote:
FtoSam wrote:Not quite understanding you there mate...

do u mean $100 for all the parts? If so... uhhh no...
lol Yeah the guys from UK did it

Heres a pic


and yeah it will it will have to do for now :)
Ahhhh, i thought you ment all my engine parts... not the air intake... i got ya now...

lol..

It does have a sharp bend at the TB though. Move your battery to the boot and use a peice of 90 degree and 45 degree piping from any exhaust shop.. just weld together and thats it... probably cost the same but will provide better flow... Check it out. Or go see gold coast mufflers at southport and tell em i sent ya. Craig did a great job on mine for a great price.
Image

If you need good deal on photography, let me know.
Top
eThix
Veteran Mechanic
Posts: 1046
Joined: Mon Feb 12, 2007 6:00 pm
Location: Brisbane

Post by eThix »

ahahah k,
alright i will look into moving my battery to the boot :) i will just need you to show me how you did yours :P cause i got no idea ahhaha

i will look into trying to get the pipe 90' pipe and have it welded, cheers man
Top
cHONGA
Apprentice
Posts: 98
Joined: Sat Aug 26, 2006 5:00 pm
Location: Sunnie Coast

Post by cHONGA »

hey hey will the exhaust all hook up to a stocko? and is it overly loud, how much ya reckon for delivery or i could meet you half and half i live on the sunny coast so mabe caboulture? ill pay 4 ya petrol to :wink: thanks mate
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

Yeah... the exhaust replaces the entire stock exhaust and should hook up to the standard exhaust no worries as this was made for my car when it was N/a.

Will need a few things done to your car. (i.e. rear bar cut made for 2nd exhaust pipe)
The best way to get this done is if you come down to brissy one day.. and we take both our cars to an exhaust shop. they will unbolt from mine and whack it into yours... then whack my new one in.
Image

If you need good deal on photography, let me know.
Top
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:
Contact FtoSam

Post by FtoSam »

Oh and alternator sold to Michael. $265.
Image

If you need good deal on photography, let me know.
Top
Post Reply

Return to “Parts For Sale”