FTO AUSTRALIA

Posted: **Fri Dec 16, 2005 11:31 am**

i just ordered the filter from that kit. Available for $60.

Posted: **Thu Dec 22, 2005 10:44 am**

IT HAS ARRIVED!!!!

Looks good, will install after Christmas!

Posted: **Sun Dec 25, 2005 11:58 am**

It doesn't fit

It hits the battery, so i may need to reduce the size of the area between the TB and the first bend. That, or get a new battery...

Kev, did you have any problems like this? Looking at your pics it looks like yours is smaller as the silicon is touching the bend, and mine isnt.

Posted: **Sun Dec 25, 2005 12:02 pm**

Take a pic so i can have a look, i've got a full size 4WD battery on mine.

Posted: **Sun Dec 25, 2005 12:06 pm**

OK Will do, will take them tomorrow and post them.

Posted: **Tue Dec 27, 2005 8:43 pm**

hey can anyone tell me if my intake is good or not ? should i replace it or something or anything can you let me know thanx
these r pix

<img src="http://i24.photobucket.com/albums/c8/dj ... FN0013.jpg" alt="Image hosted by Photobucket.com">

<img src="http://i24.photobucket.com/albums/c8/dj ... FN0014.jpg" alt="Image hosted by Photobucket.com">

Posted: **Tue Dec 27, 2005 9:06 pm**

You'll pick up 5kws just by pissing off that stock pipe...

This is what you want

Posted: **Tue Dec 27, 2005 9:45 pm**

ok cool where do i get that from.. should i get that or one of them silver ones wich the cooling thing everyone has done.
and is that hks airfilter good ? cos everyone on here has apexi

Posted: **Sun Jan 08, 2006 12:11 pm**

Finally took a clear pic of my engine bay when the car is actually not underground.

Posted: **Sun Jan 08, 2006 12:26 pm**

looks nice...I still love my Unifilter rampod....and I did buy the shade stuff to wrap around my box...but never actually did it!

Posted: **Thu Jan 12, 2006 4:35 pm**

the way to get around making room for the intake tube to fit between the battery and the TB is to cut the brackett that holds the battery in place and reweld it back together again. I took my car to my auto electrition expecting to have the battery place in the boot when he came up with the idea here are some pics of my bracket compared to a stock one

Its hard to pick up but to make it alittle easier for ya's these batterys are the same size and the bracket that holds the battery is at the end of the top bar not 3 quarters along also the battery is place all the way over to the right and a new hole is drilled into the battery tray... Make sence ??

Stock one

Mine

Posted: **Thu Jan 12, 2006 6:46 pm**

yeah i had to do the same thing... i kinda did a "dodgey job" but to similar effect, instead of moving the bracket I think I just bent it... but I had to to fit the arc intake pipe.

Posted: **Fri Jun 16, 2006 12:42 am**

Do they post to sydney?? $150 is real cheap I'll get one just need 2 know if they post 2 sydney let me know asap! I want to get em

Posted: **Fri Jun 16, 2006 10:38 am**

They do post it anyway in Australia, at the buy expense of course. Just give them a buzz, their number should be on page 1 of this thread.

Posted: **Tue Jul 04, 2006 5:31 pm**

hey! i just fitted the pipe from ontherun its NO GOOD! wheres the sound!!

my stock pipe + K&N filter sounds better.. With this new pipe i cant fit my K&N filter so i had 2 get some other filter. but no sound just feels bit faster

NOO!!

Posted: **Tue Jul 04, 2006 6:02 pm**

but no sound just feels bit faster

isnt that a good thing then ?

Posted: **Tue Jul 04, 2006 6:08 pm**

shue wrote:
but no sound just feels bit faster
isnt that a good thing then ?

No shue! i want better sound

like rawr!!! haha do u think i did something wrong my frend put it in he a mechanic

Posted: **Tue Jul 04, 2006 8:21 pm**

Drill a hole in it, u get plenty of sound & no go

Posted: **Tue Jul 04, 2006 10:05 pm**

FTO338 wrote:Drill a hole in it, u get plenty of sound & no go

bahahaha oh well...

Posted: **Wed Jul 05, 2006 1:01 pm**

Drill a hole in it, u get plenty of sound & no go

rofl

FTO AUSTRALIA

My new intake