Page 2 of 2
Posted: Tue Jul 20, 2004 3:20 pm
by fto12345
That is why i want to get some but no one seems to be able to tell me exactly if these denso ones are available for the mivec ones.
Also, I have tried calling uas but haven't had much luck either!
Also, does any one have any spare spark plug lead?
Just one will do.
If I have these I can get some one to make those upgrade for the leads.
if any one does, can they lend it to me or I'll even buy it off ya for a cheap price! Cause I'm not going to use it!

Posted: Tue Aug 03, 2004 11:31 am
by debbie
Posted: Tue Aug 03, 2004 11:38 am
by ruchi
You don't have to put different ones in the front, but as standard the FTO does uses different ones in the front and back. The reason for this is the front ones are very easy to access, so they use normal ones there, but to get to the back ones is quite a job, so they use long life ones there so you don't have to change them as often.
If you put the long life ones in the front too, you won't have to change them as often.
Make sense?

Posted: Tue Aug 03, 2004 11:41 am
by debbie
yeah

i would want long life ones all round
Posted: Tue Aug 03, 2004 1:50 pm
by RichardH
barfy wrote:UAS have done Dyno test on Denso's Iridiums and its produces a 4 KW gain. So i would say they work pretty well in FTO's

Can anyone tell me if the UAS back-to-back comparison was testing Iridium plugs versus *new* stock plugs? Or was it simply replacing stock plugs that were past their "best before" date?
I did a before and after Home Dyno run when I last got my plugs changed - standard platinum all round before and after. I got a higher torque curve across the board, by about 2 lb/ft, with fresh new plugs. So if this test wasn't against brand newies, it don't mean nuffink to me!
- Rich
Posted: Tue Aug 03, 2004 2:36 pm
by smorison
RallyMad wrote:Doesn't Steve use Denso Iridiums available from UAS. I thought they'd havew to be a good upgrade.
yeah i use them... they seem to work fine in all conditions... i don't know the part number that UAS supplied me...
plugs
Posted: Tue Aug 03, 2004 4:18 pm
by GWIDO
so whats the difference between iridium and plantinum plugs?
Posted: Fri Aug 06, 2004 7:50 pm
by RallyMad
Isn't it just what he tip is made from, ie Iridium or platinum. I think which ever are the more expensive (hte platinums?) are meant to last even longer and produce a better spark aren't they?
Posted: Thu Aug 12, 2004 4:55 pm
by fto12345
Hi guys,
I am still trying to find the right one for the fto to replace the spark plugs with...
As some of you guys have said that if you go to ngk web site in UK, they advice you to install different plugs on the front bank as opposed to the rear bank....which has completely different part numbers.
Why is that?
does any one know the part numbers of any of the upgraded spark plugs?
If so, do you mind sharing with me please?
If I know the part number then I should be able to cross reference and find the right one for me...
Please, if you know of any part numbers of any thing that is equivalent to the spark plugs for the ftos please supply the part number...
thank you all in advance...

Posted: Thu Aug 12, 2004 5:01 pm
by ruchi
fto12345 wrote:if you go to ngk web site in UK, they advice you to install different plugs on the front bank as opposed to the rear bank....which has completely different part numbers.
Why is that?
you might want to re-read the 3rd message on this page

Posted: Fri Aug 13, 2004 3:02 pm
by fto12345
You might want to read my message before yours then!
I said it requires a different spark plug for front as opposed to the rear!
Did you get what I mean? A different spark plugs with completely different part numbers!
I work in the auto industry! I have already checked and they are different ones! It's go nothing to do with the fact that you use a normal one as opposed to the iridium ones for the front cause it's much easier to replace!
That's besides the point!
Btw, for those of you who are wondering, the UAS spark plugs aren't exactly what fits an FTO....it fits another car but it seems they found one that fits an FTO by trial and error!
I won't say what car it's for though!
Just to keep them happy!
I will try and find out why it's a different spark plugs used for the front to a rear ones.
Thanks
Posted: Fri Aug 13, 2004 3:05 pm
by smorison
fto12345 wrote:I will try and find out why it's a different spark plugs used for the front to a rear ones.
all the technical docs say its because the back ones are harder to change... the different spark plug in the rear has a longer life... which would imply its made from different materials...
myself i have the same alround and replace them all at the same time.
Posted: Fri Aug 13, 2004 3:30 pm
by ruchi
ummm... no, that is the point.
As Steve has said, and likewise you'll find the same info on many other FTO forums, the rear sparkplugs are long-life ones, while the front ones are standard-life ones, so that you don't have to replace the rear ones as often, as they are a bugger to get to. It has nothing to do with performance or anything like that, it just about ease of servicing.
If you want, you can put the long-life ones in both the front and back, it will cost more, but you won't have to replace the front ones as often as you would if you were using the standard-life plugs.
Posted: Fri Aug 13, 2004 10:41 pm
by payaya
yeah irdium etc means nothing in terms of performance, they might state so but the difference would be nothing!
thats the problem with east/west V6 engines, a lot of them use platinum just for the sheer fact they are harder to change.
Posted: Wed Sep 29, 2004 12:03 pm
by Boris
So is there an end to this SAGA? Any one found the right spark plugs? I'm after part numbers... for MIVEC ones...
I found this dyno graph.
This guy has a TT Soarer, i've asked him what where the plugs on the before dyno, so should get a reply soon... the after ones are Nippon Denso Irridum's...
Links:
>>
http://www.denso.com.au/spark_main.htm
>>
http://www.denso.co.jp/PLUG/iridium-e/index.html
>>
http://www.denso.com.au/dw/spark/spark_sale.htm
Posted: Wed Sep 29, 2004 2:33 pm
by G_A_V
does anyone happen to know the lifetime of the denso irridums cause i have done around 30,000 on this set, my mechanic said irridiums usually last 90,000. but the denso irridiums have a .4mm electrode (smallest i nthe world aparently) so their lifetime would be a lot less