Car care - polish, wax etc...

Bodykits, Interior modifications, Rice Products, anything that is for looks

Moderators: IMC, Club Staff

EURO
Oldtimer
Posts: 1346
jedwabna poszewka promocja
Joined: Sun Sep 29, 2002 5:00 pm
Location: Melbourne

Post by EURO »

One thing to watch - if you go to the trouble to polish and wax etc.... next time you washt he car do not use suds.... the suds will break down the wax and polish.... just use cold/warm water and all the dirt should come off really easily if there is a layer of polish or wax still on the car.

the canubra wax is fantastic......
User avatar
khunjeng
Oldtimer
Posts: 4455
Joined: Mon Oct 24, 2005 5:00 pm
Location: Melbourne, Victoria

Post by khunjeng »

EURO wrote:One thing to watch - if you go to the trouble to polish and wax etc.... next time you washt he car do not use suds.... the suds will break down the wax and polish.... just use cold/warm water and all the dirt should come off really easily if there is a layer of polish or wax still on the car.

the canubra wax is fantastic......
yeah it is..aparently doesn't last that long but the finish is good...

I assume a more pH neutral formula will be ok..still investigating the best wash stuff after your wax/clean. bets way to tell is look for the beading..when it stops..u need more wax
FTO-101
Grease Monkey
Posts: 254
Joined: Thu Apr 27, 2006 5:00 pm
Location: SyDnEy...ClUb

Post by FTO-101 »

first of all DDAAAMMNN they some shiny cars and meguiars soft wash gel usally does the trick after waxing your car without breking away the wax. by the way nice rides
FTO-101
Grease Monkey
Posts: 254
Joined: Thu Apr 27, 2006 5:00 pm
Location: SyDnEy...ClUb

Post by FTO-101 »

had to post a couple of my fto while it was relatively clean (pics off my camera phone)

Image

Image
bobz
Grease Monkey
Posts: 166
Joined: Mon Jul 12, 2004 5:00 pm

Post by bobz »

EURO wrote:One thing to watch - if you go to the trouble to polish and wax etc.... next time you washt he car do not use suds.... the suds will break down the wax and polish.... just use cold/warm water and all the dirt should come off really easily if there is a layer of polish or wax still on the car.

the canubra wax is fantastic......
Always use a good quality Ph neutral car wash shampoo or you will scratch your car to buggery.

BobZ
[img]http://i17.photobucket.com/albums/b66/wizard561/FTOSig.jpg[/img]
User avatar
onnzo
Grease Monkey
Posts: 288
Joined: Sun Aug 08, 2004 5:00 pm
Location: Victoria

Post by onnzo »

How long did it take you guys to clean/cut/polish/wash?

Last time I did it - a few years ago now it took AGES! probably 4+ hours or so...

I was thinking of doing it again a few weeks ago but remembered how long it took last time and it really put me off!

Has anyone used a motorised buffer before? and if so, which stages can you use it for? Any recommendations on a good buffer?

Mike
bobz
Grease Monkey
Posts: 166
Joined: Mon Jul 12, 2004 5:00 pm

Post by bobz »

Unless you are a proffesional deatiler I would not use a buffer, if you dont have the right expirience you can burn the paint or wear through it.

However I would recommend a RO (Random Orbital) sander. Its pretty fool proof if you use good quality pads and products.

I would use the RO for removing marring from claying, or removing swirls or webbing as well as really shallow scratches from the top coat, with a polish.

You can also use the RO for applying paint cleansers and some waxes.

BobZ
[img]http://i17.photobucket.com/albums/b66/wizard561/FTOSig.jpg[/img]
User avatar
khunjeng
Oldtimer
Posts: 4455
Joined: Mon Oct 24, 2005 5:00 pm
Location: Melbourne, Victoria

Post by khunjeng »

yeah takes a while...took me about 4hrs + but the result is worth it.

If u wanna do it with a buffer u need a special polishing buffer not an angle grinder as the buffing verions spin at low revs...the angle grinder is way too fast..
bobz
Grease Monkey
Posts: 166
Joined: Mon Jul 12, 2004 5:00 pm

Post by bobz »

But also you can achive this kind of finish on a 16 year old black car with good products, good advice and lots of elbow grease, you dont need to get a buffer or a RO.

Image

Image

BobZ
[img]http://i17.photobucket.com/albums/b66/wizard561/FTOSig.jpg[/img]
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

I use to do it a lot when i was living with my folks, it took me like 6 hrs, I go through the whole car internally and externally with a fine comb :lol: but since i'm live in an apartment now, theres no where to wash my car or have a public access to a water outlet. :(

So i guess is either Bobz or Khunjeng's place right :wink:
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
bobz
Grease Monkey
Posts: 166
Joined: Mon Jul 12, 2004 5:00 pm

Post by bobz »

Your more then welcome to come around, you can help moving the cars around for detailing....LOL

BobZ
[img]http://i17.photobucket.com/albums/b66/wizard561/FTOSig.jpg[/img]
Lenny
Grease Monkey
Posts: 251
Joined: Fri Jan 20, 2006 6:00 pm
Location: Sydney, Australia

Post by Lenny »

http://www.waxit.com.au/

great site on this topic and they forward on quite a lot of information and quality product
Post Reply