Bolts for spoiler

Lenny · Post by **Lenny** » Wed May 24, 2006 10:24 am

Hi,

Would anyone have or know the type of bolts, and sizeetc.. that hold on the original spoiler (rear)??

Also were there any plugs etc for the other holes or did the plastic bits just sit in the holes ( am sure you will know what i mean if you have pulled the original spoiler off!!!)

shue · Post by **shue** » Wed May 24, 2006 11:35 am

just a normal bolt. its a size 10 or 11. ugh cant remember now and for the plastic bits there are plastic cap like things that go into the boot

Lenny · Post by **Lenny** » Wed May 24, 2006 1:10 pm

cheers for the info....i got a feeling when i pull the spoiler off now that there is going to be extra holes there!!!

If anyone has spare plastic bits lying around that would be great

Post by **dstocks** » Wed May 24, 2006 2:25 pm

careful when you pull the spoiler off, the plastic lugs can snap (and theyre stuck into the spoiler - break them and youre in trouble)

Lenny · Post by **Lenny** » Wed May 24, 2006 4:45 pm

Hey dStocks.

That is my problem...that is, i am pulling of an aftermarket spoiler and putting an original one back on and i am after the plastic lugs you have mentioned...

Looks like i will do without i guess....

Still got to get all the putty type glue that the previous owner layed on thick around the edges

Post by **dstocks** » Wed May 24, 2006 9:36 pm

Or.......

You could do what I did. The previous owner of my FTO was a little rough and broke a few lugs. Get a small drill and drill a small hole through the centre of the lug. I then screwed a few screws from underneath into the spoiler (although I did have to drill a couple of pilot holes in the underside of the boot frame to make this happen). Worked well though.

FTO AUSTRALIA

Bolts for spoiler

Bolts for spoiler

Careful

Or....