(closed) Group Buy: NGK & MAGNECOR Leads
Moderators: IMC, Club Staff
-
- Oldtimer
- Posts: 1905
- jedwabna poszewka promocja
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
-
- Approved FTO Australia Trader
- Posts: 11
- Joined: Tue May 09, 2006 5:00 pm
- Location: Gold Coast, QLD
- Contact:
- demonic_hordes
- Apprentice
- Posts: 59
- Joined: Wed Apr 05, 2006 5:00 pm
-
- Approved FTO Australia Trader
- Posts: 11
- Joined: Tue May 09, 2006 5:00 pm
- Location: Gold Coast, QLD
- Contact:
-
- Approved FTO Australia Trader
- Posts: 11
- Joined: Tue May 09, 2006 5:00 pm
- Location: Gold Coast, QLD
- Contact:
Stock has arrived and been dispatched.
I have some great news guys, after arriving at lunch time, all possible packages were dispatched this late this afternoon. Please click here to view your package status.
All items have been sent via express post, therefore everyone bar Michael (SG) can expect their packages to arrive on Monday. Michael unfortunately being in WA the express post network cannot guarantee delivery to your postcode, you should have you lead set by Tuesday or Wednesday.
Last edited by kudosmotorsports on Fri May 19, 2006 6:14 pm, edited 1 time in total.
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
-
- Oldtimer
- Posts: 1217
- Joined: Mon Feb 09, 2004 6:00 pm
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
lol here we go
Gotta pull your Mivec cover off & then the entire intake manifold... what underneath will look something simliar to this (This is the GR version but is effectively the same as GPX as far as leads & coil packs go)
This is the front bank - the leads have small plug that go into the coil packs on this side.
On the other side the leads have a complete spark plug boot on it - it goes straight onto the plugs in the rear bank.
As you can see by the numbering, which lead goes to which cylinder on the rear bank.
If you need to know more just ask.
Gotta pull your Mivec cover off & then the entire intake manifold... what underneath will look something simliar to this (This is the GR version but is effectively the same as GPX as far as leads & coil packs go)
This is the front bank - the leads have small plug that go into the coil packs on this side.
On the other side the leads have a complete spark plug boot on it - it goes straight onto the plugs in the rear bank.
As you can see by the numbering, which lead goes to which cylinder on the rear bank.
If you need to know more just ask.
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
yep. now if u have never taken off your inlet manifold before it might be a good idea to buy the gasket just incase it breaks when u pull it off...although its a metal gasket and when i took mine off there was no dramas....
you will have to disconnect some hoses etc...however for a DIY check the DIYFTO website.
http://www.ftodiy.co.uk/
you will have to disconnect some hoses etc...however for a DIY check the DIYFTO website.
http://www.ftodiy.co.uk/
- SilentBob
- Mechanic
- Posts: 480
- Joined: Mon Mar 31, 2003 6:00 pm
- Location: Newcastle, NSW, Australia
- Contact:
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
Where do we get the gasket again for how much?khunjeng wrote:yep. now if u have never taken off your inlet manifold before it might be a good idea to buy the gasket just incase it breaks when u pull it off...although its a metal gasket and when i took mine off there was no dramas....
you will have to disconnect some hoses etc...however for a DIY check the DIYFTO website.
http://www.ftodiy.co.uk/
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
why dont we all meet at my place this Sunday,shue wrote:recieved today, man bullet proof packin. i hurt myself tryin to rip it out. lol . anyone from melb up for a group trip to lee's this weekend to get these suckers fitted up?
Might have few beers, bbq, house warming thingi and do these cables and plugs for all our cars,
I might talk to Mitsu Werrebie to get some gaskets and will collect it for you.
We might even have time to play tennis, who knows...
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
sounds like a good idea. but i have no clue what im doin. so i might frustate u guys. ive made a thread in the vic sectionMight have few beers, bbq, house warming thingi and do these cables and plugs for all our cars,
I might talk to Mitsu Werrebie to get some gaskets and will collect it for you.
We might even have time to play tennis, who knows...
-
- Approved FTO Australia Trader
- Posts: 11
- Joined: Tue May 09, 2006 5:00 pm
- Location: Gold Coast, QLD
- Contact: