What does everyone do
Moderators: IMC, Club Staff
- Imperial
- Apprentice
- Posts: 72
- jedwabna poszewka promocja
- Joined: Wed May 25, 2005 5:00 pm
- lovemyfto
- Apprentice
- Posts: 32
- Joined: Mon Nov 29, 2004 6:00 pm
Software/Radio and Data Comms Engineer.
Only need to study accounting and science and I'll be an all round geek.....
worked with Avionics first then deciode to study IT so of course I did a double major Software Engineering/Data Communications(network crap)
Landed a job mid studies that used all the above...
But in short just another IT geek
Only need to study accounting and science and I'll be an all round geek.....
worked with Avionics first then deciode to study IT so of course I did a double major Software Engineering/Data Communications(network crap)
Landed a job mid studies that used all the above...
But in short just another IT geek
- bradlovell
- Grease Monkey
- Posts: 132
- Joined: Thu Mar 09, 2006 6:00 pm
- Contact:
- bradlovell
- Grease Monkey
- Posts: 132
- Joined: Thu Mar 09, 2006 6:00 pm
- Contact:
I got done the other day in Tassie. going to GF house. $110 and 3 points. not good!65 in a 50 zone! was pulling out and another car coming so give it a little squirt in second, thats what done me!khunjeng wrote:jonowong wrote:dude you owe me $75 and 2points!!!khunjeng wrote: I worked on the Fix Speed Cameras in NSW
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
ahhah & we know which one is your signature dish.SchumieFan wrote:Im a Sous (2nd) Chef, Basically i run my own kitchen brigade when the Head Chef is away... pretty much work 7 days a week... ie, its my day off today and yet at 7am i was in the kitchen doing stuff for a function tonight cause i dont trust the junior chefsand im only 20!:D oh it pays very well too
Breast of Chicken
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- bradlovell
- Grease Monkey
- Posts: 132
- Joined: Thu Mar 09, 2006 6:00 pm
- Contact:
-
- Oldtimer
- Posts: 1217
- Joined: Mon Feb 09, 2004 6:00 pm
OMG everyone is so smart here, wonder what will happen if i tell you guys i just bump at home do nothing?
Work in Westpac, don't ask what i do or you'll notice your account in debit!
p.s pay is crap

Work in Westpac, don't ask what i do or you'll notice your account in debit!
p.s pay is crap

The difference between what we do and what we are capable of doing would suffice to solve most of the world's problem.
[img]http://www.speedtest.net/result/79682123.png[/img]
[img]http://www.speedtest.net/result/79682123.png[/img]
- fto_gurl
- Apprentice
- Posts: 84
- Joined: Wed Jun 22, 2005 5:00 pm
There you go I just got done in QLD 105 in a 90 zone but I got $150 and 3 points. Doesn't pay to speed. Well I work as a Licensing Support Officer for the Environmental Protection Agency (QLD Government Agency). So if you wanna dig up some rocks ever you can come see me...bradlovell wrote:khunjeng wrote:I got done the other day in Tassie. going to GF house. $110 and 3 points. not good!65 in a 50 zone! was pulling out and another car coming so give it a little squirt in second, thats what done me!jonowong wrote:dude you owe me $75 and 2points!!!khunjeng wrote: I worked on the Fix Speed Cameras in NSW


-
- Grease Monkey
- Posts: 224
- Joined: Thu Feb 20, 2003 6:00 pm
- Location: Gold Coast
-
- Grease Monkey
- Posts: 288
- Joined: Thu Jan 05, 2006 6:00 pm
- Location: Ringwood, Victoria
- Contact:
I work nights at Safeway (Woolworths) stacking the dairy fridge 40 hours per week.
Boy do I feel out of it amungst all you lawyers, engineers and IT geeks.
I'm good at Quake III Instagib though.
Boy do I feel out of it amungst all you lawyers, engineers and IT geeks.
I'm good at Quake III Instagib though.

Last edited by Spud on Mon Mar 27, 2006 8:32 am, edited 1 time in total.
[img]http://members.optusnet.com.au/spudshouse/pics/FTO/GT4FTOsig.jpg[/img]
-
- Mechanic
- Posts: 778
- Joined: Tue Sep 23, 2003 5:00 pm
- Location: Kilsyth, VIC
- Contact:
my job
I work as an engineer in a plastics research laboratory.
started my working life as a fitter turner for James Neill in the UK (ECLIPSE brand of hand tools)
moved to a steel foundry as a developement engineer (jumped up fitter)
then went to Richardson knives (developement again)
moved to OZ toolmaker at Davey Pumps
Then where I am now, Moldflow @ Kilsyth. world leaders in CAE plastics
so if you check back I stated as nothing and now I do nothing
Tarkus
started my working life as a fitter turner for James Neill in the UK (ECLIPSE brand of hand tools)
moved to a steel foundry as a developement engineer (jumped up fitter)
then went to Richardson knives (developement again)
moved to OZ toolmaker at Davey Pumps
Then where I am now, Moldflow @ Kilsyth. world leaders in CAE plastics
so if you check back I stated as nothing and now I do nothing
Tarkus
Money can't buy happiness, but it can help you look for it quicker, in a convertible.
-
- Mechanic
- Posts: 467
- Joined: Mon Aug 02, 2004 5:00 pm
- Location: Melbourne
- Contact:
i'm a dole bludger. just kidding haha, i'm a printer
EZCONSOLE & EZMODCHIPS - We repair, upgrade and buy off Xbox 360, Wii, NDS, PS2 and PS3. Pickup & delivery services available. Xbox, Wii and NDS repair and opening tools available. Reasonable offers for non-working xbox 360 and Wii. Contact me for all oth