MECHANICS
Moderators: IMC, Club Staff
-
- Apprentice
- Posts: 64
- jedwabna poszewka promocja
- Joined: Sun Apr 24, 2005 5:00 pm
- Location: melbourne
MECHANICS
After having a very bad run of people doing shoddy amature and dangerouse works to my beloved FTO ive decided to ask the good people of the FTO VIC to ask Who they get to service their cars and in what area.
If we could get a good list of where to go, the other FTO's wont have to sufer in pain like mine has.
So far ive had bodged:
1. Input output speed sensor drilled through by a stereo store which inturn stuffed my auto($3000)
2. gauges installed with hot glue which melted out of place.
3. Reco auto installed took 5 weeks and was a S@#% job shifted terrible, Wrong trans oil, stereo left out , lead fell off battery list goes on..
4. Last service i asked for suspension check, aircon regas, stepper motor replacement, even booked in advance so they could get the parts in time. Didnt regas, no stepper motor ordered, And what they did to my suspension could have killed me. Only tightend 2 wheel nuts and all the suspension bolts were only left finger tight....
I think ive been very good not to have killed any of these people yet.
So if anyone can post a good mechanic for me id be very appreciative.
If we could get a good list of where to go, the other FTO's wont have to sufer in pain like mine has.
So far ive had bodged:
1. Input output speed sensor drilled through by a stereo store which inturn stuffed my auto($3000)
2. gauges installed with hot glue which melted out of place.
3. Reco auto installed took 5 weeks and was a S@#% job shifted terrible, Wrong trans oil, stereo left out , lead fell off battery list goes on..
4. Last service i asked for suspension check, aircon regas, stepper motor replacement, even booked in advance so they could get the parts in time. Didnt regas, no stepper motor ordered, And what they did to my suspension could have killed me. Only tightend 2 wheel nuts and all the suspension bolts were only left finger tight....
I think ive been very good not to have killed any of these people yet.
So if anyone can post a good mechanic for me id be very appreciative.
-
- Mechanic
- Posts: 545
- Joined: Sun Sep 11, 2005 5:00 pm
- Location: West Melb
have been recording some info from previous threads, and this might help u lanyon:
Power House GENESIS Racing
2 Cottage Street Blackburn 3130
(03) 9894 0268
SL Motorsports
0414 738 781
and (where everyone seems to be going and getting a lot of +ve feedback - im sure the guys here can tell u more about him/service)
Lee
0414738781
- Ken
Power House GENESIS Racing
2 Cottage Street Blackburn 3130
(03) 9894 0268
SL Motorsports
0414 738 781
and (where everyone seems to be going and getting a lot of +ve feedback - im sure the guys here can tell u more about him/service)
Lee
0414738781
- Ken
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Ok since i've been to all of them & have great realationship with them, i have to say all the above are good place to go.
So heres my thought.
Alex (MJ Jap Motor) his new to the block after took over Lee's old business at start of this finacial year, his a cool guy, work hard & give 110% effort of what ever his trying to do.His good for general mechanic & services.
Lee (old SL Motorsport) practically had service 90% of Vic members ride at one stage or another, he & Craig (RevZone) would have the most knowledge of FTO since they both had strip & rebuild few FTO engines & modify it. Just like Alex his good for general mechanic, services & also minor mods & tune.
Craig (RevZone), i knew him when he was at Genisis. Great guy, one of the best Apexi tuner you will find in Australia & have a great reputation for dyno tuning & modifications. Craig would be the one to go to if you want your FTO to be at the next level, as he developed the one of the 3 turbo FTO in Victoria.
Now the best part of all these guys actually all drive/own a high performance imports, so they really into cars, & not just doing it because its a job.
So heres my thought.
Alex (MJ Jap Motor) his new to the block after took over Lee's old business at start of this finacial year, his a cool guy, work hard & give 110% effort of what ever his trying to do.His good for general mechanic & services.
Lee (old SL Motorsport) practically had service 90% of Vic members ride at one stage or another, he & Craig (RevZone) would have the most knowledge of FTO since they both had strip & rebuild few FTO engines & modify it. Just like Alex his good for general mechanic, services & also minor mods & tune.
Craig (RevZone), i knew him when he was at Genisis. Great guy, one of the best Apexi tuner you will find in Australia & have a great reputation for dyno tuning & modifications. Craig would be the one to go to if you want your FTO to be at the next level, as he developed the one of the 3 turbo FTO in Victoria.
Now the best part of all these guys actually all drive/own a high performance imports, so they really into cars, & not just doing it because its a job.

Last edited by FTO338 on Tue Mar 07, 2006 9:07 pm, edited 4 times in total.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
-
- Oldtimer
- Posts: 1346
- Joined: Sun Sep 29, 2002 5:00 pm
- Location: Melbourne
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
Ya Lee is the man as I always say....for a tune...Criag at RevZone...Lee has done my tappets and my CV joints for really good prices.
Genesis is no longer but they have been replaced by some other joint called APB Autotech who did my first service...they were ok...but nothing like Lee...
Exhaust...Austec Exhaust ..they wont sell u HKS and imported stuff...just quality..nice sounding high flow bits.. the main Guy there, Steve is a guru and FPV contract out their high spec cars to him for the cat back & extractor design on the sly. He told me I would get a 7% atw gain with my system for $900...and I did.
Suspension and wheels..Centreline suspenison in Thomastown...they r simply the best...if u got there over the next few days u will see my beast being fitted with new Konis and a full overhall...will be better than new. They do a lot of race and import cars such as Skylines and done a few FTOs they told me.
Auto Trans - there is only one place to go and that is Lilydale Automatics...they are simply the best also...I never take my autos to anyone else now...you will not be disapointed with them! far away yes...but quality if thats what u want for a good price.
Hope this helps.
Genesis is no longer but they have been replaced by some other joint called APB Autotech who did my first service...they were ok...but nothing like Lee...
Exhaust...Austec Exhaust ..they wont sell u HKS and imported stuff...just quality..nice sounding high flow bits.. the main Guy there, Steve is a guru and FPV contract out their high spec cars to him for the cat back & extractor design on the sly. He told me I would get a 7% atw gain with my system for $900...and I did.
Suspension and wheels..Centreline suspenison in Thomastown...they r simply the best...if u got there over the next few days u will see my beast being fitted with new Konis and a full overhall...will be better than new. They do a lot of race and import cars such as Skylines and done a few FTOs they told me.
Auto Trans - there is only one place to go and that is Lilydale Automatics...they are simply the best also...I never take my autos to anyone else now...you will not be disapointed with them! far away yes...but quality if thats what u want for a good price.
Hope this helps.
-
- Mechanic
- Posts: 510
- Joined: Sat Oct 11, 2003 5:00 pm
- Location: Melbourne
- Contact: