Hi Guys, I am new here and I am new with FTO. I just bought A 94 GPX a couple of month ago, one of the low beam globes was blown off, I am in Melb... does any know where i can get a new globe. I have been asking REPCO and Mitsubishi dealer and they coudn't help me out.
Thanx
FTO Head light
Moderators: IMC, Club Staff
- birdbrain
- Newbie
- Posts: 13
- jedwabna poszewka promocja
- Joined: Mon Oct 06, 2003 5:00 pm
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
For part numbers use the "FTO Information" link we have pretty much every part number you cuold ever need for replacing something. i'm pretty sure you will find what you need here: http://www.ftoaustralia.com/modules.php ... page&pid=9
-
- Grease Monkey
- Posts: 275
- Joined: Sat Aug 17, 2002 5:00 pm
- Location: melbourne
fto headlight
birdbrain you can goto collins mitsubishi in southbank ask for adrian in spareparts he will help you out or goto autobarn they do stock very similar globes which require only slight mod as the plugs are slightly different.
-
- Mechanic
- Posts: 499
- Joined: Thu Aug 28, 2003 5:00 pm
- Location: Sydney
Hi,
I don't know if this will help, if you haven't gottene the bulbs yet.
The head light bulbs that you get are all modeled.
So most of the small sedans and hatches will use a model number "H4". This is a light bulb that has two fillerments in one bulb. And the bulb it self is quite thick.
Similar to this, and FTO takes "9006" and "9005". The "9006" is for your low beam, and "9005" is for your high beam.
So you don't have to get a genuine part to replace this which will cost you quite a fair bit.
Besides, there are so much better colours out there if you need to replace them.
Cheers,
I don't know if this will help, if you haven't gottene the bulbs yet.
The head light bulbs that you get are all modeled.
So most of the small sedans and hatches will use a model number "H4". This is a light bulb that has two fillerments in one bulb. And the bulb it self is quite thick.
Similar to this, and FTO takes "9006" and "9005". The "9006" is for your low beam, and "9005" is for your high beam.
So you don't have to get a genuine part to replace this which will cost you quite a fair bit.
Besides, there are so much better colours out there if you need to replace them.
Cheers,