More Guides

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
User avatar
dstocks
National Vice President
Posts: 9529
jedwabna poszewka promocja
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

More Guides

Post by dstocks »

Had a really busy day today. Put my roof lining back in after removing the glue that causes the rust in the roof. Also took the dash out to put in some of my new coated parts. Have taken all the photos and will be posting 4 new guides to Complete FTO in the next few days. Will keep updating this thread as I complete them.

For now, have completed the first one:

- Removing the Roof Lining: http://www.completefto.com.au/FTO_showcontent.asp?aid=341

Will be putting together the following in the next couple of days:

- Removing the Rear Parcel Shelf
- Reversing the Tip Direction and putting lights beneath the plus and minus
- Removing the Dashboard
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    User avatar
    devil2004
    Grease Monkey
    Posts: 174
    Joined: Sat Mar 27, 2004 6:00 pm
    Location: sydney

    Post by devil2004 »

    Thanks buddy! we really appreciate it, keep up the good work! :D

    I wish u had an airbag. I think they will be quite messy to take out. A guide for that would have been REALLY good. Oh wellz...Thanks again!
    User avatar
    dstocks
    National Vice President
    Posts: 9529
    Joined: Fri Jun 24, 2005 5:00 pm
    Location: Utopia
    Contact:

    Guide No 2

    Post by dstocks »

    Guide Number 2 - Removing the Rear Parcel Shelf:

    http://www.completefto.com.au/FTO_showcontent.asp?aid=342
    Complete FTO (http://www.completefto.com.au/completefto.asp)
      Image
      If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
      User avatar
      BuCkEt
      Oldtimer
      Posts: 1544
      Joined: Mon Nov 01, 2004 6:00 pm
      Location: Canberra

      Post by BuCkEt »

      Tip top work Dwayne! :D
      User avatar
      dstocks
      National Vice President
      Posts: 9529
      Joined: Fri Jun 24, 2005 5:00 pm
      Location: Utopia
      Contact:

      Thanks

      Post by dstocks »

      Thanks Bucket...

      Heres number 3 - Installing tip lights and changing tip direction:

      http://www.completefto.com.au/FTO_showcontent.asp?aid=343
      Complete FTO (http://www.completefto.com.au/completefto.asp)
        Image
        If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
        User avatar
        Nacho
        Oldtimer
        Posts: 2087
        Joined: Mon Jul 11, 2005 5:00 pm
        Location: Melbourne

        Post by Nacho »

        That's awesome man! Thanks a bunch. You know I'm definitely gonna need that guide.
        User avatar
        dstocks
        National Vice President
        Posts: 9529
        Joined: Fri Jun 24, 2005 5:00 pm
        Location: Utopia
        Contact:

        And the Dashboard guide

        Post by dstocks »

        Thanks Nacho.

        And finally after much typing, the final one - The dashboard removal guide:

        http://www.completefto.com.au/FTO_showcontent.asp?aid=344

        Four as promised!!!!
        Complete FTO (http://www.completefto.com.au/completefto.asp)
          Image
          If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
          User avatar
          khunjeng
          Oldtimer
          Posts: 4455
          Joined: Mon Oct 24, 2005 5:00 pm
          Location: Melbourne, Victoria

          Post by khunjeng »

          mate nice work...hey I really like your dials...I'm gonna get me some of those for sure after looking at your setup. Which ones are they exactly?? I don't remeber seeing that style before.
          User avatar
          dstocks
          National Vice President
          Posts: 9529
          Joined: Fri Jun 24, 2005 5:00 pm
          Location: Utopia
          Contact:

          Dials

          Post by dstocks »

          They are the V3 dials - got them from KMC Products in the UK:

          http://www.kmc-products.com/view_produc ... dialkitv.3

          Have already put together a guide for installing those:

          http://www.completefto.com.au/FTO_showcontent.asp?aid=310

          I also have the dial surround. You can get that from KMC Products as well

          http://www.kmc-products.com/view_produc ... dash-bezel
          Complete FTO (http://www.completefto.com.au/completefto.asp)
            Image
            If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
            User avatar
            khunjeng
            Oldtimer
            Posts: 4455
            Joined: Mon Oct 24, 2005 5:00 pm
            Location: Melbourne, Victoria

            Post by khunjeng »

            ta dood...U know I got KMC as a favourite but I didn't see them dunno what drugs I was one last night :P ...but emailed them as I assumed they would have it...btw saw your guide for that also, nice!

            Like your site in general keep up the good work dood.
            User avatar
            dstocks
            National Vice President
            Posts: 9529
            Joined: Fri Jun 24, 2005 5:00 pm
            Location: Utopia
            Contact:

            And one more...

            Post by dstocks »

            And one more just for good measure:

            Removing the tail lights and rear bumper - http://www.completefto.com.au/FTO_showcontent.asp?aid=346
            Complete FTO (http://www.completefto.com.au/completefto.asp)
              Image
              If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
              User avatar
              Bennoz
              National President
              Posts: 23676
              Joined: Fri Jan 21, 2005 6:00 pm
              Location: Sydney
              Contact:

              Post by Bennoz »

              *Hands in the air to vote for dstocks as honorary lifetime member*

              Seriously good stuff mate :wink: Might have to send a few freebies your way...
              User avatar
              mr-charisma
              Oldtimer
              Posts: 4020
              Joined: Wed Jul 06, 2005 5:00 pm
              Location: Brisbane, Australia

              Post by mr-charisma »

              This is awesome :) was just looking for one to remove the roof lining, cause I came across the little round clips that I was too scaredy to remove in case i snapped them or something :P
              User avatar
              dstocks
              National Vice President
              Posts: 9529
              Joined: Fri Jun 24, 2005 5:00 pm
              Location: Utopia
              Contact:

              REsurrection

              Post by dstocks »

              Hmmmm, another thread resurrection. There seems to be a bit of this going on atm :D .

              Glad that these still provide value. Will keep putting them together (as time and opportunity permits) as long as the demand exists.
              Complete FTO (http://www.completefto.com.au/completefto.asp)
                Image
                If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
                User avatar
                mr-charisma
                Oldtimer
                Posts: 4020
                Joined: Wed Jul 06, 2005 5:00 pm
                Location: Brisbane, Australia

                Post by mr-charisma »

                This is awesome :) was just looking for one to remove the roof lining, cause I came across the little round clips that I was too scaredy to remove in case i snapped them or something :P
                Post Reply