Bozz Speed Front
Moderators: IMC, Club Staff
-
- Mechanic
- Posts: 545
- jedwabna poszewka promocja
- Joined: Sun Sep 11, 2005 5:00 pm
- Location: West Melb
Bozz Speed Front
Kz...
My cars in the workshop atm, getting the Bozz front and Tm sideskirts fitted.
Am all excited and sh*t, but suddenly this comes into mind:
<<< Im going to have clearance problems? >>>
Am not sure how low the Bozz speed will be, and am alrdy stressing about how to pull into petrol stations and going over speed humps (not to mention, getting out from the workshop!).
To what I know, my car has standard shocks and springs all around, it has not been touched. Got some 17's on there with 45/R17 tyres. Heres a pic of my car without the kit:
Anybody know how much the Bozz speed will drop the front by and will it scrape with the standard suspension setup of the FTO?
Looks like I'll have to readjust how I drive as well
*Sry for long post*
My cars in the workshop atm, getting the Bozz front and Tm sideskirts fitted.
Am all excited and sh*t, but suddenly this comes into mind:
<<< Im going to have clearance problems? >>>
Am not sure how low the Bozz speed will be, and am alrdy stressing about how to pull into petrol stations and going over speed humps (not to mention, getting out from the workshop!).
To what I know, my car has standard shocks and springs all around, it has not been touched. Got some 17's on there with 45/R17 tyres. Heres a pic of my car without the kit:
Anybody know how much the Bozz speed will drop the front by and will it scrape with the standard suspension setup of the FTO?
Looks like I'll have to readjust how I drive as well
*Sry for long post*
Last edited by rnbboi on Wed Nov 30, 2005 1:59 pm, edited 1 time in total.
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
man lookin at your car i dont think u'll have ny problems with scraping.almost looks like mells car there. i dont think u can lower it after u get it fitted up though. from memory i think its about 4-5 inches longer than a stock bar. y dont u measure the bozz front and then measure the stock one and u'll know the difference. wheel arches u wont have scarping coz u'll be using the stock plastic thingys wont u?
-
- Mechanic
- Posts: 545
- Joined: Sun Sep 11, 2005 5:00 pm
- Location: West Melb
Was planning to lower it but Im definitely am gonna c how the Bozz Front will be like before I make any decisions.
cant measure em now lol, tis in the workshop
Umz... changing the front bar and sidskirts will change the wheel arches? (srys, lost lol) and since Im not sure, I'll say "yes" to the stock plastic thingys lol
i went to the ftooc site, and looked up some info about the bozz front, and found purple ronnies car:
geebus? but i think its been lowered by about 40mm all around
cant measure em now lol, tis in the workshop
Umz... changing the front bar and sidskirts will change the wheel arches? (srys, lost lol) and since Im not sure, I'll say "yes" to the stock plastic thingys lol
i went to the ftooc site, and looked up some info about the bozz front, and found purple ronnies car:
geebus? but i think its been lowered by about 40mm all around
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
i meant changing your skirts n front bar wont trouble your suspension set up or wheel arches(the plastic thingos under your fronnt fender- i dont know what they are called ) .so dont stress about scraping the suspension. ugh that car again. pops up all the time to tell me how s*** my car looks u'll have major parking problems and driving problems with how low his car is . when u gettin it back ? drive out to the city to show me
-
- Mechanic
- Posts: 545
- Joined: Sun Sep 11, 2005 5:00 pm
- Location: West Melb
will be getting the car back by the end of this week.
once i get the car back, gonna go for some trial runs around some places to c if it'll scrape or not. Actually, going to the petrol station is my main concern lol.
can some owners of FTO with the VS kit gimme some info about their ride - just wanna know what u guys do when your at speed humps, train tracks and stuff
come out to the city ey? i dunno lol, lotsa bumpy and steep roads
im hoping that there'll be another cruise before the end of the yr, if there is, come shue
once i get the car back, gonna go for some trial runs around some places to c if it'll scrape or not. Actually, going to the petrol station is my main concern lol.
can some owners of FTO with the VS kit gimme some info about their ride - just wanna know what u guys do when your at speed humps, train tracks and stuff
come out to the city ey? i dunno lol, lotsa bumpy and steep roads
im hoping that there'll be another cruise before the end of the yr, if there is, come shue
-
- Veteran Mechanic
- Posts: 1022
- Joined: Tue Mar 01, 2005 6:00 pm
- Location: Sydney, NSW
Just letting you know it's going to look a tad silly without side skirts, the front bar will be about 30-50mm lower from what I recall.
You shouldn't have any problems with speedhumps that's for sure, your car is plenty high. You will need to look out for steep driveways and stuff, just take it at a very big angle, *do not tackle driveways straight on*.
You shouldn't have any problems with speedhumps that's for sure, your car is plenty high. You will need to look out for steep driveways and stuff, just take it at a very big angle, *do not tackle driveways straight on*.
[img]http://members.iinet.net.au/~viper39/carbw.jpg[/img]
- BuCkEt
- Oldtimer
- Posts: 1544
- Joined: Mon Nov 01, 2004 6:00 pm
- Location: Canberra
This is advice that anyone contemplating any kind of body kit needs to think about.You shouldn't have any problems with speedhumps that's for sure, your car is plenty high. You will need to look out for steep driveways and stuff, just take it at a very big angle, *do not tackle driveways straight on*.
-
- Mechanic
- Posts: 545
- Joined: Sun Sep 11, 2005 5:00 pm
- Location: West Melb
I am getting sideskirts
I got the TM sideskirts to go with the Bozz front
I'll definitely keep that driveway thing in mind, Ive never had a kit before, afterall, ive only been driving a camry, accord, and prado (yes, thats right, a 4x4) kekekekkez
I think im gonna need some help though, with that angling thing, not quite sure how I would do it *slaps head*
I got the TM sideskirts to go with the Bozz front
I'll definitely keep that driveway thing in mind, Ive never had a kit before, afterall, ive only been driving a camry, accord, and prado (yes, thats right, a 4x4) kekekekkez
I think im gonna need some help though, with that angling thing, not quite sure how I would do it *slaps head*
-
- Veteran Mechanic
- Posts: 1022
- Joined: Tue Mar 01, 2005 6:00 pm
- Location: Sydney, NSW
Alrighty, i'll draw you pictures later so it makes better sense, but here's a situation for you
Your in the left hand gutter lane approaching a driveway on the left hand side of the road. The Driveway is quite steep at the kurb.
You car is the vertical line, your driving straight.
|
As you approach the driveway steer very slightly to the left.
\
This angle is as steep as you should enter the driveway. Once your left wheel is in turn a little more left, once both wheels are up turn sharply left and proceed up the driveway as normal.
Your in the left hand gutter lane approaching a driveway on the left hand side of the road. The Driveway is quite steep at the kurb.
You car is the vertical line, your driving straight.
|
As you approach the driveway steer very slightly to the left.
\
This angle is as steep as you should enter the driveway. Once your left wheel is in turn a little more left, once both wheels are up turn sharply left and proceed up the driveway as normal.
[img]http://members.iinet.net.au/~viper39/carbw.jpg[/img]
-
- Grease Monkey
- Posts: 252
- Joined: Sat Jan 29, 2005 6:00 pm
- Location: Townsville, North Queensland
Okay... So I have the Bozz Speed Front Bar, the TM Side Skirts & the big ghetto ass J-Tech Rear Bar on the way (eventually)... I haven't lowered the car yet but was planning on it! Am I going to have to rethink the suspension set up???
Unfortunately for me the Townsville City Council had hard on's for speed bumps & insanely steep driveways!!!
Unfortunately for me the Townsville City Council had hard on's for speed bumps & insanely steep driveways!!!
If I Had A Dollar For Every Time Someone Said "If I Had A Dollar For Every Time Someone Said <...>" Well... Then... I'd... Have A Dollar For Every Time Somone Said "If I Had A Dollar For Every Time Someone Said <...>"!!!
-
- Apprentice
- Posts: 38
- Joined: Mon Feb 16, 2004 6:00 pm
- Location: London, UK
- Contact: