Service Info in Melb
Moderators: IMC, Club Staff
- khunjeng
- Oldtimer
- Posts: 4455
- jedwabna poszewka promocja
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
Service Info in Melb
Yo!
I found a reference to Power House GENESIS Racing in a post somewhere by FTO338 (located in Blackburn) and decided to crusie down today to have a chat...found out they are no more and they have been replaced by APB Autotech.
Anyway after a long chat about FTOs the guys seemed to know their stuff and I decided to book it in for a service (timing belt) and to fix those damn tappets on my GPX..see how it goes.
I was impressed by his comments regarding the cost of FTO parts and the fact that it shouldn't always add a zero to the price!
KJ
I found a reference to Power House GENESIS Racing in a post somewhere by FTO338 (located in Blackburn) and decided to crusie down today to have a chat...found out they are no more and they have been replaced by APB Autotech.
Anyway after a long chat about FTOs the guys seemed to know their stuff and I decided to book it in for a service (timing belt) and to fix those damn tappets on my GPX..see how it goes.
I was impressed by his comments regarding the cost of FTO parts and the fact that it shouldn't always add a zero to the price!
KJ
- know1here
- Apprentice
- Posts: 37
- Joined: Tue Sep 20, 2005 5:00 pm
- Location: Box Hill
Hey KJ,
Just outta interest, how much did APB Autotech charge you for standard service?? I'm due for my next major. Have they done it yet?
I know a lotta ppl on the forum go to Lee (ex SL Motorsports). Call me ol fashion, but I prefer a mechanic who I go to their shop, rather than a "he comes to you" which kinda sounds dodge (though I'm sure it's not).
Anyone still use AO Automotive in Bundoora??? I read about them in some thread a while back.
Just outta interest, how much did APB Autotech charge you for standard service?? I'm due for my next major. Have they done it yet?
I know a lotta ppl on the forum go to Lee (ex SL Motorsports). Call me ol fashion, but I prefer a mechanic who I go to their shop, rather than a "he comes to you" which kinda sounds dodge (though I'm sure it's not).

Anyone still use AO Automotive in Bundoora??? I read about them in some thread a while back.
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Lee had sold his business (not the name) to one of the mechanic there, so SL didn't went under.
Lee can still do the job, Shue just had his extractor & hi-flow CAT done by him, & Josh is getting his extractor done atm.
To me, I rather go to someone who have lots of years of experience with different import cars (not just FTO) like Lee, then someone whos start having an "experiment" with it.
Lee can still do the job, Shue just had his extractor & hi-flow CAT done by him, & Josh is getting his extractor done atm.
To me, I rather go to someone who have lots of years of experience with different import cars (not just FTO) like Lee, then someone whos start having an "experiment" with it.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- WildRide
- Grease Monkey
- Posts: 223
- Joined: Sun Feb 20, 2005 6:00 pm
- Location: South Melbourne
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
He actually have a little setup in Springvale, not far from his old shop, is only temp, until he finish his new house, & then his house would be fully equip with all the stuff (So i was told). And of course for minor service he comes to you.
His number is 0414 738 781
His number is 0414 738 781
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
APB Autotech are doing some minor work to mine as we speak...I'm getting some new plugs, some better oil to silence my tappets as requested and some new trans fluid incl flush...wont be that much...but I will let you know...the labour might be expensive..Really shoulda done this myself...but I also wanted some other stuff checked out but its A1 ok!
I was gonna give Lee a call regarding fitting the UAS extractors...they are a must have! probably get a quote from both.
I was gonna give Lee a call regarding fitting the UAS extractors...they are a must have! probably get a quote from both.
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
Hey mate
Had a few issues with my car but this had nothing to do with APB - In fact they were a great help .. esp. when it came to getting a new set of spark leads in a short time..
They put in a lot of effort to got over some really *~dreamy~* problems and did it without much trouble..I will go back.
If you go there..tell them you spoke to the guy with the Black FTO / with crome rims with the re-made leads...they'll remember!!
KJ.
Had a few issues with my car but this had nothing to do with APB - In fact they were a great help .. esp. when it came to getting a new set of spark leads in a short time..
They put in a lot of effort to got over some really *~dreamy~* problems and did it without much trouble..I will go back.
If you go there..tell them you spoke to the guy with the Black FTO / with crome rims with the re-made leads...they'll remember!!
KJ.
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
yeah sorry forgot to say in the last post
we decided to use a 10w/50 fully Synthetic - I think (from memory it was Castrol Formula R ) but actually I can't remember...
My service cost $650 - but theye did a lot of extra work on a few things which added about 250 to the price (labour mainly)..I think for the normal service items it would be around 250-300 :
Oil change + filter (Synthetic) ~ $90
Trans fluid (geniune)+ filter ~ $70
New NGK Platiums ~ $130
* all price include labour..
But I got new leads made some other stuff checked and we had issues with not only the leads but one of the spark plug tubes which had a bend in it and made it damn hard to get the plug out (fixed!) that cost me some extra with the checking of the tappets and a few other items..
For the basic stuff (although you can do it yourself pretty easily) its about normal. I get my Ford serviced at another place and the costs are roughly the same...
we decided to use a 10w/50 fully Synthetic - I think (from memory it was Castrol Formula R ) but actually I can't remember...
My service cost $650 - but theye did a lot of extra work on a few things which added about 250 to the price (labour mainly)..I think for the normal service items it would be around 250-300 :
Oil change + filter (Synthetic) ~ $90
Trans fluid (geniune)+ filter ~ $70
New NGK Platiums ~ $130
* all price include labour..
But I got new leads made some other stuff checked and we had issues with not only the leads but one of the spark plug tubes which had a bend in it and made it damn hard to get the plug out (fixed!) that cost me some extra with the checking of the tappets and a few other items..
For the basic stuff (although you can do it yourself pretty easily) its about normal. I get my Ford serviced at another place and the costs are roughly the same...