Traction Control

Post by **dstocks** » Fri Oct 21, 2005 8:38 am

Anyone got any idea what the most likely causes for traction control not working...

Post by **Bennoz** » Fri Oct 21, 2005 9:55 am

Have a look at all the small rubber piping running in & out of the throttle body (on the top side of it.) Sometime they can block up or crack. Part from that don't know much more about it

Post by **dstocks** » Fri Oct 21, 2005 12:13 pm

Thanks Bennoz, will have a look at that. Should have asked this before too.

Is the diagnostic tool for this stuff the same one as for the ECU???. I cant remember what it was called now (MUII??? or something - saw in another post).

I guess I will need to find someone with one of these to pull out any error codes that may be in the TCL ECU.

SchumieFan · Post by **SchumieFan** » Fri Oct 21, 2005 8:25 pm

The TCL computer is easily located behind the stereo... so if yyouve done any stereo modifications etc maybe a wires popped out???

Post by **dstocks** » Fri Oct 21, 2005 9:17 pm

Thanks,

Will have a look at that too.

What is the diagnostic tool called again - the one that works with the FTO???

SchumieFan · Post by **SchumieFan** » Fri Oct 21, 2005 9:52 pm

MUT-II

Post by **dstocks** » Sat Oct 22, 2005 5:24 pm

And Bennoz wins a prize.....

One of the pipes on the throttle body had come off. Im not sure if that is the only issue yet, but it certainly was one of them. Some of the pipes a little perished, might replace them all

FTO AUSTRALIA

Traction Control

Traction Control

And...

Thanks

Bennoz Wins