RPW Extractors *Close*

spetz · Post by **spetz** » Fri Aug 12, 2005 3:31 pm

Can you give instructions on how to fit these on lancers as well?

And also, how many people have already filled out an order form? So the rest of us know when to expect the goods

barfy · Post by **barfy** » Mon Aug 15, 2005 4:34 pm

Have you received all the order forms for this mistiman ? Let me know when your ready for the payment ...

Mitsiman · Post by **Mitsiman** » Mon Aug 15, 2005 5:00 pm

I have received 8 order forms so far but not the 9th and possible I think someone was looking at a 10th set.

Fitting instructions - ahmm unbolt and bolt. There is nothng hard about htis remove stock ones which are simply the bolts on the cyl head, two bolts on flanges on flex pipe and two bolts on cat converter, then work in reverse as you fit the new ones up.

Disconnect battery during process, and remove front thermo fan only if yuou want to create some more room on the front header which is the tight fitting one and allow between 1 1/2 to 3 horus depending upon your skill level with tools and patience. Less patience then fitting time increases by 50% lol

BuCkEt · Post by **BuCkEt** » Wed Aug 17, 2005 3:21 pm

Any progess update on these?

Some has also mentioned I will need to fit new gaskets when installing these?
Is it totally neccessary to do this?

Post by **Bennoz** » Wed Aug 17, 2005 3:23 pm

Your manifold gaskets do get a little chundered when ripping off the old pipes... I'd recommend getting them anyway, they're reasonable cheap. Think I paid $36 bucks for the 2.

BuCkEt · Post by **BuCkEt** » Wed Aug 17, 2005 3:29 pm

Rightio, where's the best place to go about acquiring some gaskets?

(Meaning I have no idea about gaskets at all)

Post by **Bennoz** » Wed Aug 17, 2005 3:31 pm

I bought Genuine. Mitsiman would probably be able to supply them as well.

ph3var · Post by **ph3var** » Wed Aug 17, 2005 4:01 pm

As far as I know they are included with the extractors

Mitsiman · Post by **Mitsiman** » Wed Aug 17, 2005 5:18 pm

All the orders are either in the process of being sent out or out being ceramic coated.

You will not need to replace the stock header gasket as they are a metal gasket and to be honest don't wear out as such. Clean them with some spirits, refit with some sealer and all will be good.

Pato · Post by **Pato** » Tue Aug 23, 2005 9:40 pm

just wondering if neone has recieved there extractors as yet???? how long do ya recon it will take????? Has anyone gotten quotes from exhaust shops for the fitment of the extractors???? I got one for 200! i was thinking 150, so not to bad i guess!!

Post by **Bennoz** » Tue Aug 23, 2005 10:25 pm

Pato wrote:just wondering if neone has recieved there extractors as yet???? how long do ya recon it will take????? Has anyone gotten quotes from exhaust shops for the fitment of the extractors???? I got one for 200! i was thinking 150, so not to bad i guess!!

Mate, $200 is damn good! Better make sure they're good on their word thou, cause they can be a &*#$ to fit!

BuCkEt · Post by **BuCkEt** » Wed Aug 24, 2005 12:07 am

Mine are awaiting me at the local TNT Depot.

Just gotta go pick 'em up and arrange fitting.

barfy · Post by **barfy** » Wed Aug 24, 2005 12:50 pm

Mine arrived yesterday, and they look good, would look better though under my bonnet instead on my bedroom floor

dimi · Post by **dimi** » Fri Aug 26, 2005 6:37 pm

im still waiting, im in brissy though, so i can only assume it takes longer,

BuCkEt · Post by **BuCkEt** » Fri Aug 26, 2005 10:06 pm

I've got mine and they're going in on Tuesday.

Car's being dynoed before and after the install so I'll be able to post up some results.

Post by **Bennoz** » Sat Aug 27, 2005 1:02 am

Be heaps interested to see that mate! I never got dyno's done when I put mine on. Felt like there was a big gain! You got full CAI, but whats your cat back like?

BuCkEt · Post by **BuCkEt** » Sat Aug 27, 2005 11:51 am

Catback is stock as a rock.

I'm still trying to find a decent one to put on. But I'll end up doing that bit myself.

jayfromukftooc · Post by **jayfromukftooc** » Sat Aug 27, 2005 2:10 pm

can i get in on this group buy if so whats the total price inc shipping to the uk

ph3var · Post by **ph3var** » Sat Aug 27, 2005 7:38 pm

Go to www.rpw.com.au
Email Dave and he might sort something for you.
I think The Garage over your side of the world is RPWs UK contact so he might be able to sort something from there for you.

dimi · Post by **dimi** » Mon Aug 29, 2005 5:31 pm

I am still waiting for mine, is anyone else still waiting??

FTO AUSTRALIA

RPW Extractors Close