flashing "N"

fto617 · Post by **fto617** » Sat Jul 23, 2005 4:41 pm

hey guys i had my gearbox rebuilt last year around june
the car alwayz change gears smoothly since then no problem
but now sometimes i can feel it sliped gear in both tip and just on drive
N starts to flash
but after i switch car off and turn back on its gone
but comes back after a while
any idea on what is wrong?
thanks!!!
i tried disconnecting the battery for 30min already(i did 1hr) and it still happens

APZ-312 · Post by **APZ-312** » Sun Jul 24, 2005 3:57 pm

i had the same problem.. it was the input speed sensor for me.. all worn out and it does that.. i think u'll need to get it replaced..

ive gotten mine replaced and its been fine ever since.. but yeah.. that'll be your best bet.. unless your low on oil or your using the wrong oil all together.. =P.. or so my mechanic said lol..

Post by **smorison** » Mon Jul 25, 2005 2:19 pm

you need to get a consult unit plugged in and it will give the error code and then you'll know whats wrong...

most common are speed sensors that are worn out...

fto617 · Post by **fto617** » Tue Jul 26, 2005 6:06 pm

smoison could you hep me find what are the part numbers for the input speed sensor?
thanks!

Post by **smorison** » Tue Jul 26, 2005 8:47 pm

yeah i'll look it up... if i can find it in my database...

it sits on top of your gearbox so it should be easy enough to track down the part number

fto617 · Post by **fto617** » Wed Jul 27, 2005 1:09 am

is that part easily removable ???
so not expensive labour??/
man i just serviced my engine + gearbox last week

APZ-312 · Post by **APZ-312** » Wed Jul 27, 2005 11:25 am

when i replaced it.. the part + labour cost me about 300 roughly..

fto617 · Post by **fto617** » Fri Jul 29, 2005 5:46 pm

hey APZ-312
did u replace it with the sonsor i sold to u?
ma ni went to 3 different mechanics today
2 transmision and one performance mechanic
transmission guys couldnt even get the computer to read with the ECU
the performance place got it to read but no error
they did it 3 times
when they test drove my car it was fine
OMGthis is streesing me out!!!
and i ended up buying HIDs for 400bucks!
very nice too:D

SG · Post by SG » Fri Jul 29, 2005 9:12 pm

did you change gearbox oils recently?

fto617 · Post by **fto617** » Sat Jul 30, 2005 2:15 am

i serviced it 2 weeks ago

SG · Post by SG » Sat Jul 30, 2005 2:48 am

i heard a little while ago on a fto review from the 'race scar' tv program that if you dont use genuine mistu fto oil for the gearbox it can do wierd things...

fto617 · Post by **fto617** » Sat Jul 30, 2005 4:07 am

ye ai heard of that too so i used genuine stuff

fto617 · Post by **fto617** » Tue Aug 02, 2005 2:48 am

excuse me guys can anyone help me find the part number for
the input speed sensor?
no body knows!!!!
i called up northshore mits and they dont know
same as kempys
all mits northshore said is that there is 2 sensors listed
one is right angled and one has a harness attaced to it
anybody have any ideas???
the flashing N is annoying me!!!

GPXBOY · Post by **GPXBOY** » Tue Aug 02, 2005 11:03 pm

ive got this problem too...helllp its pissing me off too and it just started 30mins ago hahaha....i dont wanna go to a mechanic before i know what speed sensor thing is and how easy it is to get so i dont get ripped off

onnzo · Post by **onnzo** » Wed Aug 03, 2005 2:26 am

Get your chassis number and send it to Kempy's.

Part number is MR567292. This WILL vary depending on the year of your car - hence you need to give them your chassis number.

I cant remember if that is the 3 or 4 pin sensor. It varies according to the year of your car. I cant even rember which one my 94 GR uses... I have the info at my parents place and can get it on the weekend if you want it.

Mike

fto617 · Post by **fto617** » Wed Aug 03, 2005 2:44 am

so onzo did you have the same problem???
so i assume the part number u provided is for input speed sensor?
thanks

Aweb · Post by **Aweb** » Wed Aug 03, 2005 3:10 am

This doesnt help you with the part number but it may help anyway.

http://www.ftooc.org/phpbb/viewtopic.php?t=470

GPXBOY · Post by **GPXBOY** » Wed Aug 03, 2005 10:09 am

onnzo wrote:Get your chassis number and send it to Kempy's.

Part number is MR567292. This WILL vary depending on the year of your car - hence you need to give them your chassis number.

I cant remember if that is the 3 or 4 pin sensor. It varies according to the year of your car. I cant even rember which one my 94 GR uses... I have the info at my parents place and can get it on the weekend if you want it.

Mike

whats Kempy's?

Post by **Bennoz** » Wed Aug 03, 2005 10:16 am

www.kempys.co.nz
its a mitsubishi parts place in NZ

GPXBOY · Post by **GPXBOY** » Wed Aug 03, 2005 10:24 am

Bennoz wrote:www.kempys.co.nz
its a mitsubishi parts place in NZ

Thanx man would have neva guessed that one...