EVOLVE DYNO DAY AT PRO_TEK Saturday 9th of JULY 2005!! (NEW
Moderators: IMC, Club Staff
- FTO338
- Oldtimer
- Posts: 6712
- jedwabna poszewka promocja
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
-
- Grease Monkey
- Posts: 275
- Joined: Sat Aug 17, 2002 5:00 pm
- Location: melbourne
123 kw at the wheels seems somewhat low
as when i had the car they got 152kw at the wheels! When i ran it it was in 3rd gear not 4th and to my knowledge hksfto has not been derestricted :lol:What fuel were you running? I used mobil s8000,also having a cai fitted may have caused a restriction though i havent seen how youve set it up.

<P>HKSFTO-most published fto in aust.</P>
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Thank you Scracy, now you had confirm what I had suspected all along, I got 125kwatw with 3rd gear before, & as I said its just plan weird to me for someone dyno cars on a gear which was designed for cruising.
W.R & Mil, looks like we have to do another dyno run with two fans & running on 3rd gear

W.R & Mil, looks like we have to do another dyno run with two fans & running on 3rd gear

DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
eheheeh good stuff, so did u push all the other car aside just like in the ad
I think is time to bring you new ride for cruise

I think is time to bring you new ride for cruise

DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- WildRide
- Grease Monkey
- Posts: 223
- Joined: Sun Feb 20, 2005 6:00 pm
- Location: South Melbourne
Scracy!!
Awsome to see your still around dude.
I think the limiter has a bit to do with that figure. The power output flattend out a bit during the mid-range, but really started to pick up again towards the end. Climed 12kw between 150 and 170kph where is stopped dead. No RPM figure makes the whole thing hard to judge, but I'd say she was easy on target for >135kw.
Give it 3rd gear and I'd say mystery solved.
Thought a bit about the CAI. It's done wonders down low, where i'm getting noticably more torque for fewer rpm.
The front of the box isn't closed at all, so there "should" be plenty air.
BP Ultima.
You should poke your nose in here more often.
I know a lot of the guys here would love to hear more from you.
WR
Awsome to see your still around dude.
I think the limiter has a bit to do with that figure. The power output flattend out a bit during the mid-range, but really started to pick up again towards the end. Climed 12kw between 150 and 170kph where is stopped dead. No RPM figure makes the whole thing hard to judge, but I'd say she was easy on target for >135kw.
Give it 3rd gear and I'd say mystery solved.

Thought a bit about the CAI. It's done wonders down low, where i'm getting noticably more torque for fewer rpm.

BP Ultima.
You should poke your nose in here more often.
I know a lot of the guys here would love to hear more from you.
WR
- sxcfto
- Mechanic
- Posts: 640
- Joined: Wed Aug 20, 2003 5:00 pm
- Location: West Melbourne VIC
- Contact:
Scracy back

Although you would probably cruise right over the top of us all !

-
- Grease Monkey
- Posts: 275
- Joined: Sat Aug 17, 2002 5:00 pm
- Location: melbourne
Thanks guys nah couldnt cruise all over the beloved fto
still might come to the next meet as it would be great to catch up with all of you
Things have worked great lately and ive achieved what i set out to achieve ie: ive finished the house
but still miss the fto
oh well thats life. Wildride when i had a dodgy torque converter i still managed 135 kw atw so yeah definatly something wrong there
btw im getting married to my apprentice wife of the last five years so if any one wants to come (looking at toni,kev,mikey in particular) pm me for futher details.
Cheers Guys
Love Scracy





Cheers Guys
Love Scracy

<P>HKSFTO-most published fto in aust.</P>
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Congratulation bro, & I wouldn't miss it for anything, haahahaa damit suddenly all those funny lines are coming back to me.
"Why are you so meaning to me" ahahahhaha
So are we going to do another "fish & chips" session before we "send you off"??
"Why are you so meaning to me" ahahahhaha

DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- sxcfto
- Mechanic
- Posts: 640
- Joined: Wed Aug 20, 2003 5:00 pm
- Location: West Melbourne VIC
- Contact:
Scracy's "going to the chapel and his gonna get married " !!
Congratulations good to hear life is beautiful and everything you set out to acheive is coming to plan... there is hope for us all yet !
You will have a very happy life and Im sure plenty of little bambinos as well !!
Im sure we will all catch up soon in the process of organising the next FTO event so keep your eyes open for that it should be a good one !

Congratulations good to hear life is beautiful and everything you set out to acheive is coming to plan... there is hope for us all yet !
You will have a very happy life and Im sure plenty of little bambinos as well !!

Im sure we will all catch up soon in the process of organising the next FTO event so keep your eyes open for that it should be a good one !

-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
Re: EVOLVE DYNO DAY AT PRO_TEK Saturday 9th of JULY 2005!!
I wanna go to this place to dyno my FTO this Saturday (6/8/05)sxcfto wrote:Evolve are holding our very first dyno event at Pro-Tek Automotive.
Come see Melbournes first Dyno nite with Mr Whippy, Jumping castle and DJ!!
All cars are welcome, all teams welcome!
Also Jun Sawa will be there shooting this event for Hot 4's cruise patrol!!!
PM me if your interested in participating on the Dyno!
Where: Pro-Tek Automotive
273 Dundas St Preston 3072
(03) 9484 3117
When: Saturday Feb 26th
Time: 5pm onwards
Cost: $25-30 Depending on how many cars. (Cost is for Dyno Run ONLY)
Anybody coming?
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Make sure u do it on 3rd, & not 4th like what happen to us, as the 4th is overdrive for Tip, it a gear for Hwy cruising.
How much they charging you Max?? & What time you going?
How much they charging you Max?? & What time you going?
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact: