Project FTO VR4

[Rob Furniss]

It looks insanely tidy Daz, good work. I knew you'd do a neat job after your previous supercharger install which was very tidy too.

[bjk]

I might be blind and have missed it, but what did you do with the issue of the front turbo interfering with the clutch slave?

[dazjb]

I had to modify the actuator bracket to move it away from the slave cylinder and then bend the arm to reach to the wastegate on the front turbo.

[bjk]

Ah yep! Think that's what Bennoz has done as well. Pictures help my brain work with these sorts of things.

[Bennoz]

Yeah, I bought stiffer actuators, came with longer arms, cut & shut them into place & welded up a bracket that holds both the clutch slave & the actuator.

[DODO``]

Wow, just wow.. good work mate congratulations!

Sent from my D5833 using Tapatalk

[bjk]

What exactly did you do to the radiator fan Daz? Are you just running the one fan or have you since put a second in?

[dazjb]

I have a spal push fan now fitted on the other side of the rad ...



Sent from my SM-G935F using Tapatalk

[bjk]

Ah yeah. Does it do enough of a job in traffic, or do you try to avoid taking it out much in peak altogether?

[dazjb]

It gets the temps down real quick. It's a Spal VA01-BP70/LL-36S so it moves a fair bit of air.

Don't have to worry too much about peak times in the UK at this time of year .. It peaked at around 14 degrees celsius today!

[Sahin]

Yeah it was cold here in Brisbane today too, got down to a low of 34degrees Celsius