silverGPXs Ride

[DODO``]

Have the dash out now, surprisingly only took 20 minutes to get out!

All these years of me saying that its harder to take the dash out to change the heatercore haha

Dwayne, how do i get the heater core out with the dash out? I see that the blower motor, evaporator, air distribution unit all have nuts on the top and bottom, but i cant see how i can move it forward enough to get the core out?

Is there any tricks?

Why are you taking the heatercore out for?

[bjk]

Probably leaking.

[silverGPX]

Well turns out I need to buy a new heatercore with pipes. The seals I got from demisterman ripped when I took them off the old heatercore. Just gonna buy alloy one with plastic pipes off eBay for $150.

So delayed again.

Well other than that just tidying up the front bar wiring and got some Parker globe holders for my facelift headlights of a 121 metro believe it or not.

Be good to get the front bar on again..

[Sahin]

Just deal her right up with gasket goo lol

[dstocks]

Take off al the nuts holding the units off and you should be able to remove the unit next to the heater core to get at the core itself. Is tight, but will work.

[silverGPX]

Core is out now, just the ripped demisterman gaskets problem. Just buying a whole new unit which I should of done years ago.

[destinationtoby]

would be tonnes quicker if I had help but there's isn't much of an FTO club anymore, kinda sad really, but I guess you get that with older vehicle clubs.

[silverGPX]

Can anyone help me out, chasing an IFS sensor.

Cheers

[Websta14]

Have the dash out now, surprisingly only took 20 minutes to get out!

All these years of me saying that its harder to take the dash out to change the heatercore haha

Dwayne, how do i get the heater core out with the dash out? I see that the blower motor, evaporator, air distribution unit all have nuts on the top and bottom, but i cant see how i can move it forward enough to get the core out?

Is there any tricks?

I snapped the plastic piping going into the heater core too so now I have no heater atm where did you pick up a heater core from?


Sent from my iPhone using Tapatalk

[silverGPX]

I got one off eBay but I didn't read the ad saying that the pipes that come with it are universal.

I'd recommended just getting it all from demisterman.

Other than that I spent a long day on the FTO.

-Plumbed up the heater core with some fresh rubber tubing and clamps-
-Found both throttle body coolant pipes were rotted so swapped them for some fresh tubing and clamps-
-thoroughly cleaned the TB and gasket mating surface
-tidied up some vacuum lines I messed around with back in the day.
-tossed out the vacuum gauge tubing, because the gauge is useless lol


Sent from my iPhone using Tapatalk

[silverGPX]

Next on the list

- floor console
- tidy up rear speaker wires
- rewire the front indicators with proper plugs and sh*t
- redo intake pipe
- regrease bushings




Sent from my iPhone using Tapatalk

[silverGPX]

Boot sorted

- removed sub box
- new carpet (as I had to cut old one for side sub fitment)
- car builders rubber matting cut and stuck under spare tyre
- sanded scratches out of brace




Sent from my iPhone using Tapatalk

[Bennoz]

Your car should be mint when done. Do us a favour & don't sell the f**king thing. Mothball it. It owes you nothing.

[bjk]

Your car should be mint when done. Do us a favour & don't sell the f**king thing. Mothball it. It owes you nothing.

f**k'n this. Why are you tidying this sh*t up if you want to sell it.

[Technikhaus]

Agreed with the above two statements...

[silverGPX]

Thanks everyone

Did some more work today, put some legit plugs down for the front bar for easy unplug.

Also wired in the facelift parkers




Sent from my iPhone using Tapatalk

[silverGPX]

Sent from my iPhone using Tapatalk

[Technikhaus]

I also had to rewire my bumper wiring, makes such a difference, those factory plugs are annoying, and so fragile.

[silverGPX]

Yeah mine was a mess with sh*tty wires from crimps and sh*t and was just dangling around.

I'm just super happy about the Parkers lol




Sent from my iPhone using Tapatalk

[dstocks]

Thats looking great