Crank pulley bolt won't undo - any tips?

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
Rob Furniss
Oldtimer
Posts: 1394
jedwabna poszewka promocja
Joined: Wed Jan 19, 2011 11:32 pm
Location: Perth
Contact:
Contact Rob Furniss

Crank pulley bolt won't undo - any tips?

Post by Rob Furniss »

Need to get the cambelt off to do the half moons on Rowans car but the crank pulley bolt won't shift.
I've made something to lock the pulley and tried a breaker bar and an air-driven impact wrench but it won't shift.
I will try again tomorrow but does anyone have tips/suggestions as to what else to try?
I'm sure it wasn't on this tight on my fto.
Top
User avatar
Vectose
Forum Moderator
Posts: 3952
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Crank pulley bolt won't undo - any tips?

Post by Vectose »

Breaker bar against ground/control arm and crank engine.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
Top
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:
Contact dstocks

Re: Crank pulley bolt won't undo - any tips?

Post by dstocks »

Put an extension on the handle of the breaker bar. A 1.5m length of pipe over the handle will help. Mind you,ive broken a breaker bar doing this.
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    Top
    User avatar
    Daniel2019
    Oldtimer
    Posts: 7957
    Joined: Thu Jan 12, 2012 12:25 pm
    Location: Sydney!
    Contact:
    Contact Daniel2019

    Re: Crank pulley bolt won't undo - any tips?

    Post by Daniel2019 »

    Get a bigger bar.
    I fix cars.
    Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
    bjk wrote:you old people are no help at all.
    Top
    Rob Furniss
    Oldtimer
    Posts: 1394
    Joined: Wed Jan 19, 2011 11:32 pm
    Location: Perth
    Contact:
    Contact Rob Furniss

    Re: Crank pulley bolt won't undo - any tips?

    Post by Rob Furniss »

    Ha ha ok guys will put my long trolley jack bar over the breaker - it's about 2m long.
    Top
    User avatar
    Daniel2019
    Oldtimer
    Posts: 7957
    Joined: Thu Jan 12, 2012 12:25 pm
    Location: Sydney!
    Contact:
    Contact Daniel2019

    Re: Crank pulley bolt won't undo - any tips?

    Post by Daniel2019 »

    Yup that'll do it :lol:

    I have a 7 or 8 foot metal pipe I use for stuff like that.
    I fix cars.
    Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
    bjk wrote:you old people are no help at all.
    Top
    User avatar
    PHIL069
    Oldtimer
    Posts: 4719
    Joined: Sun Sep 20, 2009 5:00 pm
    Location: Central Coast > South Australia

    Re: Crank pulley bolt won't undo - any tips?

    Post by PHIL069 »

    Vectose wrote:Breaker bar against ground and crank engine.
    This^

    It's the only way I got mine done...and I tried everything.
    I even lowered the entire car onto a wedged breaker bar and it held the car up 8O

    Just make sue you unplug the crank sensor so the car can't start!
    mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
    Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
    Top
    Rob Furniss
    Oldtimer
    Posts: 1394
    Joined: Wed Jan 19, 2011 11:32 pm
    Location: Perth
    Contact:
    Contact Rob Furniss

    Re: Crank pulley bolt won't undo - any tips?

    Post by Rob Furniss »

    PHIL069 wrote:
    Vectose wrote:Breaker bar against ground and crank engine.
    This^

    It's the only way I got mine done...and I tried everything.
    I even lowered the entire car onto a wedged breaker bar and it held the car up 8O

    Just make sue you unplug the crank sensor so the car can't start!
    Did that on the old car and it worked, thought it was a bit dodgy/looked like a crazy fool doing it as it lifted the car up!
    Top
    adzski
    Veteran Mechanic
    Posts: 1013
    Joined: Wed Dec 21, 2011 1:57 am

    Re: Crank pulley bolt won't undo - any tips?

    Post by adzski »

    just went through this.

    car in fifth gear, someone step on the breaks.
    massive long breaker bar and she will crack loose.

    or you could just attach a socket to the breaker bar and let it rest on the ground. and crank it, make sure you unplug the crank angle sensor though.
    didnt work for me however.

    i recommend the first one.
    Top
    User avatar
    Daniel2019
    Oldtimer
    Posts: 7957
    Joined: Thu Jan 12, 2012 12:25 pm
    Location: Sydney!
    Contact:
    Contact Daniel2019

    Re: Crank pulley bolt won't undo - any tips?

    Post by Daniel2019 »

    Just use a bigger bar or go to the gym you pansies :lol:
    I fix cars.
    Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
    bjk wrote:you old people are no help at all.
    Top
    User avatar
    Bennoz
    National President
    Posts: 23676
    Joined: Fri Jan 21, 2005 6:00 pm
    Location: Sydney
    Contact:
    Contact Bennoz

    Re: Crank pulley bolt won't undo - any tips?

    Post by Bennoz »

    Or buy a decent rattle gun? #firstworldproblems
    Top
    Rob Furniss
    Oldtimer
    Posts: 1394
    Joined: Wed Jan 19, 2011 11:32 pm
    Location: Perth
    Contact:
    Contact Rob Furniss

    Re: Crank pulley bolt won't undo - any tips?

    Post by Rob Furniss »

    Bennoz wrote:Or buy a decent rattle gun? #firstworldproblems
    Yeah thought the supercheap one would easily do it, should have known by the name.
    Top
    User avatar
    Daniel2019
    Oldtimer
    Posts: 7957
    Joined: Thu Jan 12, 2012 12:25 pm
    Location: Sydney!
    Contact:
    Contact Daniel2019

    Re: Crank pulley bolt won't undo - any tips?

    Post by Daniel2019 »

    I have a Sumake one at work (was decent price too) that does about 1,500Nm.. SP ones are also good. Snap-on ones are good too but overpriced. Blue point ones aren't as good as they used to be.
    I fix cars.
    Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
    bjk wrote:you old people are no help at all.
    Top
    User avatar
    Technikhaus
    Oldtimer
    Posts: 3656
    Joined: Wed Dec 28, 2011 4:45 pm
    Location: Dunedin - NZ
    Contact:
    Contact Technikhaus

    Re: Crank pulley bolt won't undo - any tips?

    Post by Technikhaus »

    Milwaukee :D
    Man '96 FTO GPX
    Man '89 Legacy RS Rally car
    Man '90 MR2 GT
    Auto '08 Fairmont Ghia
    Top
    User avatar
    Chebus
    Grease Monkey
    Posts: 361
    Joined: Sun Jun 30, 2013 3:10 pm
    Location: sunshine coast

    Re: Crank pulley bolt won't undo - any tips?

    Post by Chebus »

    Black ridge all the way!
    Top
    User avatar
    Sahin
    HULK
    Posts: 5519
    Joined: Wed Oct 05, 2011 10:38 pm
    Location: Up to me nuts in boys guts

    Re: Crank pulley bolt won't undo - any tips?

    Post by Sahin »

    Shane-o branded tools
    Top
    User avatar
    SchumieFan
    Oldtimer
    Posts: 5875
    Joined: Thu Aug 05, 2004 5:00 pm
    Location: GPS signal lost
    Contact:
    Contact SchumieFan

    Re: Crank pulley bolt won't undo - any tips?

    Post by SchumieFan »

    Sahin wrote:Shane-o branded tools
    So a spanner?
    Image
    Top
    Rob Furniss
    Oldtimer
    Posts: 1394
    Joined: Wed Jan 19, 2011 11:32 pm
    Location: Perth
    Contact:
    Contact Rob Furniss

    Re: Crank pulley bolt won't undo - any tips?

    Post by Rob Furniss »

    1.5 metre bar didn't shift it but that was me being a pansy (I could see my breaker flexing so backed off).
    Bar against the suspension arm and cranked it did the job, FTO power all the way.
    Top
    User avatar
    Supplanter
    Forum Moderator
    Posts: 6420
    Joined: Tue Oct 22, 2002 5:00 pm
    Location: Arizona Bay
    Contact:
    Contact Supplanter

    Re: Crank pulley bolt won't undo - any tips?

    Post by Supplanter »

    SchumieFan wrote:
    Sahin wrote:Shane-o branded tools
    So a spanner?
    Nah, he just uses his hand.

    Hulk smash.
    LED ALL the things.
    Top
    Post Reply

    Return to “FTO Help”