ADZSKI'S FTO

adzski · Post by **adzski** » Fri Mar 13, 2015 4:36 pm

Technikhaus wrote:Yeah, I kind of wish I went for 17" as It would also allow me to lower the car a little more, but meh.. haha

hahaha thats why i am getting rid of my dstocks bar, want to lower it abit more, sits to low with the dstocks bar.

Technikhaus · Post by **Technikhaus** » Fri Mar 13, 2015 5:14 pm

I love the bar, and with the side-skirts and rear bar I I think with maybe a little more low I'd be happy

Pretty much exactly how Dwayne's sits...

adzski · Post by **adzski** » Fri Mar 13, 2015 5:19 pm

i love it too but its to low for me.
cant be bothered getting defected every 5 minutes cause of lows.
are you running the full kit with coil-overs?

Technikhaus · Post by **Technikhaus** » Fri Mar 13, 2015 8:04 pm

I've got the whole kit but only have the front bar currently installed. And am yet to buy coilovers.
Over here in NZ, you're allowed the body kit to be as low as you like, as long as the chassis is 10cm or higher above the ground, and you can certify it to be lower if you like.

Post by **dstocks** » Fri Mar 13, 2015 9:24 pm

Im running Apexi lowering springs and it sits 12 cm off the ground. As long as its over 10cm,thats legal

silverGPX · Post by **silverGPX** » Sat Mar 14, 2015 9:46 am

Go too low and youll f**k all of youre tyre on the inner seam on the front

Daniel2019 · Post by **Daniel2019** » Sat Mar 14, 2015 2:58 pm

silverGPX wrote:Have sh*tty wheel alignment and youll f**k all of youre tyre on the inner seam on the front

EFA.

silverGPX · Post by **silverGPX** » Sat Mar 14, 2015 7:56 pm

Please elaborate what you mean Daniel

adzski · Post by **adzski** » Mon Mar 16, 2015 1:58 am

dont plan to go to low. just the dstocks bar hangs a lot lower than stock.

Technikhaus · Post by **Technikhaus** » Mon Mar 16, 2015 4:38 pm

Just purchased coil-overs, so curious to see how low I will be able to get it, and still be usable

adzski · Post by **adzski** » Mon Mar 16, 2015 6:34 pm

not that low from my experience. my front end was not that low and the bar was like 50-60mm off the ground

adzski · Post by **adzski** » Mon Mar 16, 2015 6:35 pm

what coilovers did you buy

adzski · Post by **adzski** » Thu Mar 19, 2015 6:26 pm

Post by **bjk** » Thu Mar 19, 2015 7:01 pm

Think you'd do with a flared guard on that rear haha. Nice design though and that dish is sweet. Can you grab some more side on pics of the fronts?

adzski · Post by **adzski** » Thu Mar 19, 2015 7:12 pm

hahahaha havent got around to touching the guards yet, waiting on mates. gonna have a huge days and roll a s13, s14, lexus, another fto.
yeh ill do it next time on working on it should be this saturday.

Post by **Supplanter** » Thu Mar 19, 2015 7:41 pm

adzski · Post by **adzski** » Thu Mar 19, 2015 7:55 pm

Touché

Technikhaus · Post by **Technikhaus** » Fri Mar 20, 2015 9:32 am

adzski wrote:what coilovers did you buy

I picked up a second hand set of D2 coilovers for $250, I figured if they were crap I could throw them into the Auto-X FTO, otherwise I'll throw them in mine and get it certed.

I've lowered mine on them for now, but it's currently sitting far too low, and I can't turn

I'm liking your new wheels though!

adzski · Post by **adzski** » Fri Mar 20, 2015 5:16 pm

oh nice, wow thats really cheap.

i never bothered getting my certed just figured i put stock suspension back in then get it cleared then put the coilovers back in. never even been mentioned when i have been defected before either.

FTO AUSTRALIA

ADZSKI'S FTO

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO

Re: ADZSKI's FTO, NATASHA

Re: ADZSKI's FTO