Project Beema

destinationtoby · Post by **destinationtoby** » Fri Mar 13, 2015 4:15 pm

Some undersealing has begun.
All the ball joints and tie rod ends are shithouse. Will have to do the lot at some stage.

adzski · Post by **adzski** » Fri Mar 13, 2015 4:43 pm

been stalking this for a while now.
really interested to see how it progresses.
Love the old bmws.

destinationtoby · Post by **destinationtoby** » Thu Mar 19, 2015 9:27 pm

adzski wrote:been stalking this for a while now.
really interested to see how it progresses.
Love the old bmws.

destinationtoby · Post by **destinationtoby** » Thu Mar 19, 2015 9:27 pm

image.jpg

adzski · Post by **adzski** » Thu Mar 19, 2015 10:05 pm

how wide are the spacers?
what wheels you planning to run

destinationtoby · Post by **destinationtoby** » Sat Mar 21, 2015 8:25 pm

adzski wrote:how wide are the spacers?
what wheels you planning to run

25mm spacers, mainly just to fill the flares that I'm getting.
Wheels are formula branded, just light weight 17"s .8" front 8.5rear . Temporary until find the set I want & have the cash for.

adzski · Post by **adzski** » Sat Mar 21, 2015 8:31 pm

what wheels do you plant to get later?
bbs rs? or some sort of 3 peice wheels?

destinationtoby · Post by **destinationtoby** » Sat Mar 21, 2015 8:43 pm

adzski wrote:what wheels do you plant to get later?
bbs rs? or some sort of 3 peice wheels?

Nah, all the bimmer fellas have them, they look good. But I'm going to go with something different.
Looking at vertini concave wheels. Like these

image.jpg

adzski · Post by **adzski** » Sat Mar 21, 2015 8:52 pm

those will look nice, will make it look VIP

destinationtoby · Post by **destinationtoby** » Sat Mar 21, 2015 9:03 pm

adzski wrote:those will look nice, will make it look VIP

Yeah I think so too.
Yours look tidy too,, looks like you'll need some flares aswell

adzski · Post by **adzski** » Sat Mar 21, 2015 9:16 pm

hahaha i was hoping i would have to use flares. just wanted to roll the guard and camber but see what happens.

whats the specs on the vertini?

destinationtoby · Post by **destinationtoby** » Tue Apr 07, 2015 4:07 pm

adzski wrote:whats the specs on the vertini?

wide

they vary. Hence why I'm experimenting abit before I rush into buying them

Also removed everything apart from the engine from the engine bay, sprayed it black then put everything back on.

destinationtoby · Post by **destinationtoby** » Sat Apr 18, 2015 11:52 am

So my springs & strut braces arrived. I'd thought I got ripped off from the first place I bought them from because they wouldn't reply to my emails and it has been a couple months since I paid for them. So I bought another front strut brace from a different place and then it arrived on the same day as all the other sh*t lol

destinationtoby · Post by **destinationtoby** » Sat Apr 18, 2015 11:55 am

Also finally got me self a decent jack.

Daniel2019 · Post by **Daniel2019** » Sat Apr 18, 2015 4:56 pm

f**k yeah those kinchrome ones are excellent. Have lifted trucks with them at work before

destinationtoby · Post by **destinationtoby** » Sat Apr 18, 2015 6:59 pm

Daniel2019 wrote:f**k yeah those kinchrome ones are excellent. Have lifted trucks with them at work before

It's so fuking heavy

destinationtoby · Post by **destinationtoby** » Tue May 19, 2015 9:05 pm

Found a set of wheels that suit it abit better, had to buy em.

Chebus · Post by **Chebus** » Wed May 20, 2015 2:13 pm

If you look really carefully you might see just a tiny bit of poke

Post by **bjk** » Wed May 20, 2015 3:23 pm

Chebus wrote:If you look really carefully you might see just a tiny bit of poke

"But Officer, at least 50% of it is under the guard!"

Technikhaus · Post by **Technikhaus** » Wed May 20, 2015 3:47 pm

New numberplate too?

FTO AUSTRALIA

Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema

Re: Project Beema