PHIL069's 95 FTO GPX
Moderators: IMC, Club Staff
-
- 9.5"
- Posts: 6793
- jedwabna poszewka promocja
- Joined: Tue Oct 13, 2009 5:00 pm
Re: PHIL069's 95 FTO GPX
Ha *~delightful!~*!
Needs moar Meshuggah
Needs moar Meshuggah
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: PHIL069's 95 FTO GPX
Philo did you paint your car in acrylic or 2k??
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: PHIL069's 95 FTO GPX
Fiddly bits
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: PHIL069's 95 FTO GPX
Acrylic, because it is easier to play with after you paint.destinationtoby wrote:Philo did you paint your car in acrylic or 2k??
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: PHIL069's 95 FTO GPX
My first try out with my GoPro Hero3 Black Edition...
It is full HD, feel free to watch it in full screen
Any ideas on how to reduce the wind noise on the second camera position?
It is full HD, feel free to watch it in full screen

Any ideas on how to reduce the wind noise on the second camera position?
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- JAMZO_wamZo
- Grease Monkey
- Posts: 256
- Joined: Sun Apr 21, 2013 7:26 pm
- Location: Brisbane Southside, 4161
Re: PHIL069's 95 FTO GPX
Sounds soo good
Always thought of buying a gopro or some sort of camera.
One day one day...

One day one day...

Hey. Hey fella..
- ObsidianRadio
- Oldtimer
- Posts: 2050
- Joined: Sat Jan 21, 2012 4:08 am
- Location: Adelaide, SA
- Contact:
Re: PHIL069's 95 FTO GPX
Can't wait to see this go-pro's work on the Fast & Furious 7; FTO Edition we filmed



Jack
Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: PHIL069's 95 FTO GPX
I just read through this entire thread, man what a good job 

mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: PHIL069's 95 FTO GPX



I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
- bjk
- Totes
- Posts: 5756
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: PHIL069's 95 FTO GPX
Where is this film anyhow?ObsidianRadio wrote:Can't wait to see this go-pro's work on the Fast & Furious 7; FTO Edition we filmed![]()

- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: PHIL069's 95 FTO GPX
After the Galant is donebjk wrote:Where is this film anyhow?ObsidianRadio wrote:Can't wait to see this go-pro's work on the Fast & Furious 7; FTO Edition we filmed![]()

mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- bjk
- Totes
- Posts: 5756
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: PHIL069's 95 FTO GPX
I'll await it eagerly! Get to see how Jack handled my baby. 

- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: PHIL069's 95 FTO GPX
Have been doing some work to my intake manifold.
I decided it was time for a polish.
It took me 30 hours to get to the stage I am at now.
I'm still deciding if I want to paint the recess under the words and the small section of pipes in front of the words with red metalcast?
The steps I took...
1. Remove manifold from car
2. Clean manifold with brake clean
3. Start the polish process with wire spindle brushes on the drill (8 hours)
4. Clean up the deep recesses with a small file on the drill
5. Sand all sections I wanted mirror finish with 120 grit wet & dry paper (dry) (10 hours)
6. Sand with 400 grit (wet)(4 hours), 800 grit (wet) (2 hours), 1200 grit (wet) (1 hour), 1500 grit (wet) (45 mins), 2000 grit (wet) (30 mins)
7. Buff all sanded sections with medium buffing wheel and compound (2 hours)
8. Buff all buffed sections with fine buffing wheel and compound (2 hours).
9. ???
Pics...
Intake removed from engine bay
Intake manifold before
Starting the wire brushing
Wire brushing cont.
Wire brushing cont.
Wire brushing completed
120 grit dry sanding completed
400 and 800 grit wet sanding completed
1200, 1500 and 2000 grit wet sanding completed
Medium buffing completed
Fine buffing completed
A few outdoor pics in the sun...
Now Sue wants the intake of the Galant done...
I decided it was time for a polish.
It took me 30 hours to get to the stage I am at now.
I'm still deciding if I want to paint the recess under the words and the small section of pipes in front of the words with red metalcast?
The steps I took...
1. Remove manifold from car
2. Clean manifold with brake clean
3. Start the polish process with wire spindle brushes on the drill (8 hours)
4. Clean up the deep recesses with a small file on the drill
5. Sand all sections I wanted mirror finish with 120 grit wet & dry paper (dry) (10 hours)
6. Sand with 400 grit (wet)(4 hours), 800 grit (wet) (2 hours), 1200 grit (wet) (1 hour), 1500 grit (wet) (45 mins), 2000 grit (wet) (30 mins)
7. Buff all sanded sections with medium buffing wheel and compound (2 hours)
8. Buff all buffed sections with fine buffing wheel and compound (2 hours).
9. ???
Pics...
Intake removed from engine bay
Intake manifold before
Starting the wire brushing
Wire brushing cont.
Wire brushing cont.
Wire brushing completed
120 grit dry sanding completed
400 and 800 grit wet sanding completed
1200, 1500 and 2000 grit wet sanding completed
Medium buffing completed
Fine buffing completed
A few outdoor pics in the sun...
Now Sue wants the intake of the Galant done...
You do not have the required permissions to view the files attached to this post.
Last edited by PHIL069 on Sun Feb 11, 2018 3:34 pm, edited 3 times in total.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: PHIL069's 95 FTO GPX
Woah!
Well done bestie!
Well done bestie!

I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
- kiz
- SA Coordinator
- Posts: 2178
- Joined: Wed Nov 09, 2011 10:09 pm
- Location: Adelaide, South Australia
Re: PHIL069's 95 FTO GPX
f**k me, guess what you're doing for a hangover cure on the Sunday after Show N' Shine 

There are two types of people on forums; those that give helpful advice, and the others
1998 Mitsubishi FTO GPVR AERO
1998 Mitsubishi FTO GPVR AERO

- Vectose
- Forum Moderator
- Posts: 3952
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: PHIL069's 95 FTO GPX
Great work Phil! 

Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: PHIL069's 95 FTO GPX
Looks great, how many hours is all that?
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: PHIL069's 95 FTO GPX
spetz wrote:Looks great, how many hours is all that?
PHIL069 wrote:It took me 30 hours to get to the stage I am at now.

BTW...
Thanks for all the great comments guys

mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: PHIL069's 95 FTO GPX
WOW 

Complete FTO (http://www.completefto.com.au/completefto.asp) 
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you

If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- bjk
- Totes
- Posts: 5756
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: PHIL069's 95 FTO GPX
Cleaner than it came off the factory floor I reckon!