Carmate Front Bar

ObsidianRadio · Post by **ObsidianRadio** » Wed Sep 03, 2014 12:13 am

Someone should just sell me a mint DC bar or a dstocks bar w/fogs, rheo and indicators for $450 landed

Technikhaus · Post by **Technikhaus** » Wed Sep 03, 2014 12:01 pm

I have an HKS bar just chilling in my shed :p

Post by **Shhtuart** » Wed Sep 03, 2014 12:19 pm

ObsidianRadio wrote:I'll need to have my mind made up and a bumper landed in 4 weeks unless I want to wait until after christmas to fix my fast deteriorating car up

My bottom lip fell off the front bar other day, sh*t's everywhere

And what's wrong with HKS? Not too dramatic, won't cost me $1000 to do... I have a budget of $450 for the front bumper

I can get you a facelift with rheo, fogs and indicators landed for under $400 to your door. Will be either black or white from japan.

Post by **dstocks** » Wed Sep 03, 2014 2:06 pm

Make sure you have the freight sorted Stuart, ive tried that before and really got burned because the bar is longer than EMS will accept. But then maybe you have a channel I dont.....

Post by **Shhtuart** » Wed Sep 03, 2014 2:28 pm

Import monster via container comes to $310 + whatever domestic freight works out to be. E-go would be <$50. It's over the other side of the city though so id take some petrol money if you were keen.

Post by **Shhtuart** » Wed Sep 03, 2014 2:30 pm

This bad boy;

http://www.importmonster.com.au/view.ph ... m123344504

Post by **dstocks** » Wed Sep 03, 2014 6:34 pm

Ok, thats interesting. For bigger things import monster looks the goods then. The people ive been using would have charged me $400 just for freight if id have bought across a full bar. Thats why the bar I bought to make the original TS Factory got cut in half before it gt sent and plastic welded back together when it got here.

silverGPX · Post by **silverGPX** » Wed Sep 03, 2014 8:44 pm

Jessestreeter

Post by **Shhtuart** » Wed Sep 03, 2014 9:11 pm

silverGPX wrote:Jessestreeter

For everything else, yes. But bumpers are too big as dstocks said. Container is the best way.

ObsidianRadio · Post by **ObsidianRadio** » Wed Sep 03, 2014 11:06 pm

I don't want a stock bumper though. They're not low enough and they're boring hahaha. The HKS looks sensible and is lower than the factory bumpers.

If I could pick anything I'd take a Bozz or a DC, but obviously there are none available in Australia at the moment...

Post by **dstocks** » Thu Sep 04, 2014 7:56 am

Actually, the prefacelift Factory TS im looking at getting made is a blended DC bar (the DC is normally just a lip), so if you want that im working on it...

mark12 · Post by **mark12** » Thu Sep 04, 2014 8:55 am

dstocks wrote:Actually, the prefacelift Factory TS im looking at getting made is a blended DC bar (the DC is normally just a lip), so if you want that im working on it...

very interested in this!

Earthbornseven · Post by **Earthbornseven** » Thu Sep 04, 2014 9:46 am

mark12 wrote:
dstocks wrote:Actually, the prefacelift Factory TS im looking at getting made is a blended DC bar (the DC is normally just a lip), so if you want that im working on it...
very interested in this!

I'm also very interested in this.

ObsidianRadio · Post by **ObsidianRadio** » Thu Sep 04, 2014 7:17 pm

dstocks wrote:Actually, the prefacelift Factory TS im looking at getting made is a blended DC bar (the DC is normally just a lip), so if you want that im working on it...

Could I have one in four weeks?

FTO is going off the road this weekend due to front bumper actually falling off...

Post by **Supplanter** » Thu Sep 04, 2014 8:59 pm

mark12 · Post by **mark12** » Thu Sep 04, 2014 9:14 pm

Post by **dstocks** » Thu Sep 04, 2014 10:55 pm

Hmmm,

Not sure I can make that deadline. Will have to see.

Post by **Jholapeno** » Sat Sep 13, 2014 8:27 pm

dstocks wrote:Ok, thats interesting. For bigger things import monster looks the goods then. The people ive been using would have charged me $400 just for freight if id have bought across a full bar. Thats why the bar I bought to make the original TS Factory got cut in half before it gt sent and plastic welded back together when it got here.

Preface lift TS Factory, definitely interested in this dstocks!

Kustom · Post by **Kustom** » Sun Sep 14, 2014 4:46 pm

Prefacelift is where its at

Daniel2019 · Post by **Daniel2019** » Sun Sep 14, 2014 5:45 pm

Kustom wrote:Prefacelift is where its at

This!

FTO AUSTRALIA

Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar

Re: Carmate Front Bar