DIY/DIT day.
Moderators: IMC, Club Staff
- okamitengu
- Grease Monkey
- Posts: 317
- jedwabna poszewka promocja
- Joined: Sun Oct 03, 2010 11:37 pm
DIY/DIT day.
VIPFTO kiz and I have been discussing one saturday afternoon getting together for a diy.
most likley just a shoot the sh*t day, but I need to install a heater core and new alarm/car starter/central locking
so we have determined for kiz and I a saturday afternoon would be best.
i imagine if we did it late, like 1-2 or 3 it may be ok for others too.
i need to organise fairly soon, so jump on it!
what time would suit you and what date in the next 4 weeks?
most likley just a shoot the sh*t day, but I need to install a heater core and new alarm/car starter/central locking
so we have determined for kiz and I a saturday afternoon would be best.
i imagine if we did it late, like 1-2 or 3 it may be ok for others too.
i need to organise fairly soon, so jump on it!
what time would suit you and what date in the next 4 weeks?
- ObsidianRadio
- Oldtimer
- Posts: 2050
- Joined: Sat Jan 21, 2012 4:08 am
- Location: Adelaide, SA
- Contact:
Re: DIY/DIT day.
Do it while my engine's out... You can help me clean it 

Jack
Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: DIY/DIT day.
I have to drop Sue and Steven @ Adelaide airport for their trip to Sydney on Sat 12/7.
If you have it then I should be able to drop in.
EDIT: I will be hopefully in the Galant, and I mean hopefully.
If you have it then I should be able to drop in.
EDIT: I will be hopefully in the Galant, and I mean hopefully.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- okamitengu
- Grease Monkey
- Posts: 317
- Joined: Sun Oct 03, 2010 11:37 pm
Re: DIY/DIT day.
sounds good, discussion is centring around that date... about 330
anyone else want to chime in here or on FB?
anyone else want to chime in here or on FB?
- kiz
- SA Coordinator
- Posts: 2178
- Joined: Wed Nov 09, 2011 10:09 pm
- Location: Adelaide, South Australia
Re: DIY/DIT day.
12 July 3:30. Jai is giving reacharounds.
There are two types of people on forums; those that give helpful advice, and the others
1998 Mitsubishi FTO GPVR AERO
1998 Mitsubishi FTO GPVR AERO

- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: DIY/DIT day.
Any chance of organising a window tint job for the Galant for this day Tim?
After I drop the family at the airport and before the DIY meet.
Will know a bit closer if the Galant is ready, but I expect it will be.
After I drop the family at the airport and before the DIY meet.
Will know a bit closer if the Galant is ready, but I expect it will be.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
Re: DIY/DIT day.
If they are open Phil Just let me know to be sure.
BTW remember those control arm bushes I asked you about? can we get them organised please lol
BTW remember those control arm bushes I asked you about? can we get them organised please lol
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: DIY/DIT day.
Yes we can organise.
PM me the cars JDM VIN#, list of parts you need and a delivery address.
I will then get a quote for you.
PM me the cars JDM VIN#, list of parts you need and a delivery address.
I will then get a quote for you.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
Re: DIY/DIT day.
Will do and just remeber to confirm vr4tint and will sort it you want to do sat or the Friday?
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: DIY/DIT day.
I could do it either day, but Saturday would be prefered.
Sue and Steven are flying out at 10am, so after that.
Friday we are going into Adelaide city shopping, it might wreck our plans if we have to hang around a tint shop for half a day.
Sue and Steven are flying out at 10am, so after that.
Friday we are going into Adelaide city shopping, it might wreck our plans if we have to hang around a tint shop for half a day.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
Re: DIY/DIT day.
I'll call him tomorrow just not sure how long they open on sat mate will let ya know
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: DIY/DIT day.
I could drop them at the airport at 8:30am at the earliest, if that would help.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
- ObsidianRadio
- Oldtimer
- Posts: 2050
- Joined: Sat Jan 21, 2012 4:08 am
- Location: Adelaide, SA
- Contact:
Re: DIY/DIT day.
vipfto wrote:If they are open Phil Just let me know to be sure.
BTW remember those control arm bushes I asked you about? can we get them organised please lol
Is Tim having suspension broblems!?

Jack
Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
Re: DIY/DIT day.
Nope need parts for a different car vr4 actually lol
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI
- okamitengu
- Grease Monkey
- Posts: 317
- Joined: Sun Oct 03, 2010 11:37 pm
Re: DIY/DIT day.
Why cant I like posts on this board yet BEN!!! lol *like*kiz wrote:12 July 3:30. Jai is giving reacharounds.
- okamitengu
- Grease Monkey
- Posts: 317
- Joined: Sun Oct 03, 2010 11:37 pm
Re: DIY/DIT day.
so 330 saturday.
7 Riley street holden hill.
seize ya then
7 Riley street holden hill.
seize ya then
- bjk
- Totes
- Posts: 5756
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: DIY/DIT day.
Late to the party, but it's not a Saturday I'll be working so I'll probably be along.
- kiz
- SA Coordinator
- Posts: 2178
- Joined: Wed Nov 09, 2011 10:09 pm
- Location: Adelaide, South Australia
Re: DIY/DIT day.
Is it just me or does that sentence not make sensebjk wrote:Late to the party, but it's not a Saturday I'll be working so I'll probably be along.

There are two types of people on forums; those that give helpful advice, and the others
1998 Mitsubishi FTO GPVR AERO
1998 Mitsubishi FTO GPVR AERO

- bjk
- Totes
- Posts: 5756
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: DIY/DIT day.
It's not particularly well worded, but I blame morning.kiz wrote:Is it just me or does that sentence not make sensebjk wrote:Late to the party, but it's not a Saturday I'll be working so I'll probably be along.
Probably would have been better and lengthier phrased as. "I work every second Saturday, and coincidentally the date for this event falls upon a Saturday in a week where I will not work. Chances are I will attend said event." Happy?
