possible top engine mount goinggg
Moderators: IMC, Club Staff
- Fulltiltorgasm
- Grease Monkey
- Posts: 340
- jedwabna poszewka promocja
- Joined: Thu Sep 14, 2006 5:00 pm
- Location: Miami gold coast
- Contact:
possible top engine mount goinggg
Been gettin the occasional clunk when going over the occasional bumps, only noticed it after tyres where getting down to 32 psi, put em back up to 36 and just happen to notice the occasional clunk. Springs & shocks done about 60,000 2 years old, so i would image its not a suspension issue, but am taking it to pedders (rip merchants) just to get the 20 somethign points test, just to make sure no issue and elimnate that. im thinking its the top mount as other ones have been replaced recently and its prob orig and looking slighty worn. any other thoughts on what it could be ? also getting very slight vibrations thru car. if it is the top mount are they readily available ? thanks
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: possible top engine mount goinggg
Sway bar bushes?
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- shadowarrior
- Tightarse
- Posts: 2703
- Joined: Thu Oct 27, 2011 4:48 pm
- Location: Gold Coast
Re: possible top engine mount goinggg
Pedders are shitfucks. Do you get the clunk if you drive slowly over say a bump? I have a feeling they are the drop links. Easy to change.
- Fulltiltorgasm
- Grease Monkey
- Posts: 340
- Joined: Thu Sep 14, 2006 5:00 pm
- Location: Miami gold coast
- Contact:
Re: possible top engine mount goinggg
Yeah, doesnt do it every bump, but I did drive over 2 speeds bumps at slow speed and yes small clunk each time. still does occasionally at higher speeds aswell. Yeah pedders are riip merchants just want them to have a look at see if they can pinpoint the clunk for me.
- Vectose
- Forum Moderator
- Posts: 3952
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: possible top engine mount goinggg
Pedders will tell you everything is stuffed and needs to be replaced and quote you 3k. 

Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
- shadowarrior
- Tightarse
- Posts: 2703
- Joined: Thu Oct 27, 2011 4:48 pm
- Location: Gold Coast
Re: possible top engine mount goinggg
And they will also scare you to think that if you take the car out of their shop, it will just break apart in pieces and then implode into a worm hole. Once you are sucked in and agree to the job for $3k, they will open everything in your car....and then tell you they found more stuff broken and it's going to cost you $6k total, if you negotiate, they will bring the price down to $5.5k. After getting everything fixed, if you drive down to another Pedders near you for the 20 point check, they will tell you everything in your suspension is broken again.Vectose wrote:Pedders will tell you everything is stuffed and needs to be replaced and quote you 3k.
True story.

- shadowarrior
- Tightarse
- Posts: 2703
- Joined: Thu Oct 27, 2011 4:48 pm
- Location: Gold Coast
Re: possible top engine mount goinggg
Oh and you can take your wheel off and see if the drop link heads are attached in funny angles to the sway bars...if you can move those heads around with your hand, your drop links are rooted. Pretty common part to go as part of wear and tear.
- Fulltiltorgasm
- Grease Monkey
- Posts: 340
- Joined: Thu Sep 14, 2006 5:00 pm
- Location: Miami gold coast
- Contact:
Re: possible top engine mount goinggg
yeah ive already been pedders once before same story said about 3500 worth of works, i laughed at them and showed my mechanic he also laughed too. if it is a droplink will driving it a couple of days before i can get it to my usual mechanic do much damage ?
- shadowarrior
- Tightarse
- Posts: 2703
- Joined: Thu Oct 27, 2011 4:48 pm
- Location: Gold Coast
Re: possible top engine mount goinggg
naah, should be fine. Btw, you can change drop links yourself...easy as peeing after getting drunk.
- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: possible top engine mount goinggg
I'm sure theres a few jokes in here somewhere..shadowarrior wrote:naah, should be fine. Btw, you can change drop links yourself...easy as peeing after getting drunk.
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
- shadowarrior
- Tightarse
- Posts: 2703
- Joined: Thu Oct 27, 2011 4:48 pm
- Location: Gold Coast
Re: possible top engine mount goinggg
lol 
not gonna get them out of me till am drunk again

not gonna get them out of me till am drunk again

-
- Grease Monkey
- Posts: 128
- Joined: Thu Nov 08, 2012 12:28 pm
- Location: margate
- shadowarrior
- Tightarse
- Posts: 2703
- Joined: Thu Oct 27, 2011 4:48 pm
- Location: Gold Coast
Re: possible top engine mount goinggg
Breaker bar, muscle and wd40. Mine were rusted, got them out last week.
spray wd40 24hrs before you want to do the work.

- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: possible top engine mount goinggg
f**k WD40, just get a bigger breaker bar 

I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
- Fulltiltorgasm
- Grease Monkey
- Posts: 340
- Joined: Thu Sep 14, 2006 5:00 pm
- Location: Miami gold coast
- Contact:
Re: possible top engine mount goinggg
ok so noise was right hand bush goneskis on sway bar, left isnt far behind either, so basically all joints/bushes are getting on aswell, none of these have been replaced in over 100,000 so thats quite legitimate. is it hard to get the sway bar bushes ? also as there is no bush there anymore im guessing its not the best idea to drive it until its replaced?
other thing they said was the bump stops on suspension were smashed all round ? are these a serious asap kind of repair needed ?
other thing they said was the bump stops on suspension were smashed all round ? are these a serious asap kind of repair needed ?
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: possible top engine mount goinggg
http://www.ebay.com.au/itm/Mitsubishi-F ... 1bd&_uhb=1
Sway bar bushes ^
Nope bump stops aren't anything urgent, unless ya doin jumps n sh*t
But if they're smashed to crap, then it might mean shocks are rooted.
Sway bar bushes ^
Nope bump stops aren't anything urgent, unless ya doin jumps n sh*t

But if they're smashed to crap, then it might mean shocks are rooted.
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: possible top engine mount goinggg
PHIL069 wrote:Sway bar bushes?
Right againFulltiltorgasm wrote:ok so noise was right hand bush goneskis on sway bar

Your Jedi powers are weakening Sidwarriorshadowarrior wrote:I have a feeling they are the drop links.

mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()
- Fulltiltorgasm
- Grease Monkey
- Posts: 340
- Joined: Thu Sep 14, 2006 5:00 pm
- Location: Miami gold coast
- Contact:
Re: possible top engine mount goinggg
destinationtoby wrote:http://www.ebay.com.au/itm/Mitsubishi-F ... 1bd&_uhb=1
Sway bar bushes ^
Nope bump stops aren't anything urgent, unless ya doin jumps n sh*t![]()
But if they're smashed to crap, then it might mean shocks are rooted.
those bushes are 20mm apparently he said he measured swaybar and mine was 16 or 18mm ?? anyone know why this could be ?
- Fulltiltorgasm
- Grease Monkey
- Posts: 340
- Joined: Thu Sep 14, 2006 5:00 pm
- Location: Miami gold coast
- Contact:
Re: possible top engine mount goinggg
also would there be anyway of getting a hold of the swaybar bushes from a suplier in australia so wont have to wait ?? ze help is appreciated
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: possible top engine mount goinggg
Go to bursons and order 1 x Super Pro sway bar bush kit Part# SPF1344-16K (16mm) or SPF1344-18K (18mm)
Same bush as a Galant HG, HH and HJ
http://www.superpro.com.au/superpro-par ... 344-_%20_K
Same bush as a Galant HG, HH and HJ
http://www.superpro.com.au/superpro-par ... 344-_%20_K
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!![]()
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...![]()