Rear camber bolt seized

[Astron_Boy]

You get the new bolts and installed yet?

[silverGPX]

Hes gonna need longer ones with that asr subframe brace.

[Vectose]

Yes I got the new bolts off of Dwayne and everything is in except for the ASR brace.

[shadowarrior]

Ok... this is scaring me. I might get the bolts before I start working on them. :/

[Sahin]

Ok... this is scaring me. I might get the bolts before I start working on them. :/

The bolts are the same as a lancer so do it not on a Sunday and you'll be fine... (So if you need to cut the bolts out you can shoot to the wreckers)

[payaya]

I didn't get the bolt out. It is still stuck in the control arm bush sleeve.

I cut it on both sides between the chassis and control arm so that the control arm just drops out.

Looks like the cut bolt is away from the sleeve in your pic. If the bolt is still stuck to the sleeve (it's more a bearing than sleeve) how did you get the control arm back on??

[Vectose]

Press out bush and press in new one.