At least you know the engine is going to be fresher than anything you would have bought second hand though ... Similar to how well Aza's went when he got his back...
Sadly, even if a car is well maintained, it will always loose a bit of performance once the K's stack on...
Daniel's Rookie DIY FTO Build!
Moderators: IMC, Club Staff
-
rock_it
- Oldtimer
- Posts: 6599
- jedwabna poszewka promocja
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Daniel's Rookie DIY FTO Build!
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
-
SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: Daniel's Rookie DIY FTO Build!
A rebuild is when something breaks and you need to 'rebuild' it
Reconditioning is preventative maintenance...
That assembly still seems a tad higher than what I would have thought...
Reconditioning is preventative maintenance...
That assembly still seems a tad higher than what I would have thought...
-
Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Probably easier I just quote my "wow, just wow" post from earlier... 
-
rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Although a while ago ...
I had my Evo engine reconditioned, and forged internals done for about 5K... Granted it is a 4 banger, with more access to parts...
I had my Evo engine reconditioned, and forged internals done for about 5K... Granted it is a 4 banger, with more access to parts...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
-
PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: Daniel's Rookie DIY FTO Build!
FixedSchumieFan wrote:A rebuild is when something breaks and you need to 'rebuild' it
Reconditioning is replacing all the internal parts with new ones; ie reco alternator = old alt with new internals...
Preventative maintenance is just servicing.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
-
PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: Daniel's Rookie DIY FTO Build!
Find everything that you think is needed then send the list including links to the workshop and let them confirm before you purchase/order.Daniel2019 wrote:Also, have been told I need Mark 3 bearings (main, bigend, thrust)
Now, one would assume I click on the S3 option, correct? -
Crank (need x4) - http://www.camskill.co.uk/m3b0s9p7636/M ... ec_Engines
Big end (need x6) - http://www.camskill.co.uk/m3b0s9p7570/M ... TO_V6_DE3A
Now with the thrust bearing the only thing camskill has listed is thrust washers - http://www.camskill.co.uk/m3b0s9p48700/ ... st_Washers_
Or am I completely off course here?
...help me
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
-
Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Here's total list so far -
GASKETS, SEALS etc. http://www.camskill.co.uk/m3b0s9p5811/M ... V6_Engines
BELTS http://www.camskill.co.uk/m3b0s9p37116/ ... X_and_GPvR
BIG END SHELLS (s3 X 6)
http://www.camskill.co.uk/m3b0s9p7570/M ... TO_V6_DE3A
CRANK MAIN BEARING SHELLS (S3 X 4)
http://www.camskill.co.uk/m3b0s9p7636/M ... ec_Engines
THRUST WASHERS http://www.camskill.co.uk/m3b0s9p48700/ ... st_Washers_
PISTON RINGS http://www.camskill.co.uk/m3b0s9p9256/M ... _0_V6_DE3A
Have emailed it off to Nas just then so will await confirmation before placing the order.
What am I missing?
GASKETS, SEALS etc. http://www.camskill.co.uk/m3b0s9p5811/M ... V6_Engines
BELTS http://www.camskill.co.uk/m3b0s9p37116/ ... X_and_GPvR
BIG END SHELLS (s3 X 6)
http://www.camskill.co.uk/m3b0s9p7570/M ... TO_V6_DE3A
CRANK MAIN BEARING SHELLS (S3 X 4)
http://www.camskill.co.uk/m3b0s9p7636/M ... ec_Engines
THRUST WASHERS http://www.camskill.co.uk/m3b0s9p48700/ ... st_Washers_
PISTON RINGS http://www.camskill.co.uk/m3b0s9p9256/M ... _0_V6_DE3A
Have emailed it off to Nas just then so will await confirmation before placing the order.
What am I missing?
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
-
Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Engine is finished!
Now to get it in the car!
Now to get it in the car!
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
-
rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Daniel's Rookie DIY FTO Build!
SWEET!!!!!
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
-
Vectose
- Forum Moderator
- Posts: 3952
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: Daniel's Rookie DIY FTO Build!
Let me know if you need a hand with it.
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
-
Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: Daniel's Rookie DIY FTO Build!
I need a hand with itVectose wrote:Let me know if you need a hand with it.
Getting engine crane from the boss on Sunday and hopefully picking engine up Monday.
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
-
Technikhaus
- Oldtimer
- Posts: 3656
- Joined: Wed Dec 28, 2011 4:45 pm
- Location: Dunedin - NZ
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Sweet!
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
-
Lawso
- Penis Fingers
- Posts: 2458
- Joined: Sat Apr 05, 2008 5:00 pm
- Location: Canberra
- Contact:
-
rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Daniel's Rookie DIY FTO Build!
That still sounds so strange to me...Lawso wrote:I can drive a rented ute if you need on Monday!
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
-
Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Just picked up the engine crane, picking up engine tomorrow morning
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
-
Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
-
Technikhaus
- Oldtimer
- Posts: 3656
- Joined: Wed Dec 28, 2011 4:45 pm
- Location: Dunedin - NZ
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Yay!
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
-
PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: Daniel's Rookie DIY FTO Build!
Good stuff bestie, bet you can't wait to start it up and have it go vrooooooom
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
-
Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: Daniel's Rookie DIY FTO Build!
Cheers guys!
Yep, has been a long wait. Hopefully if I pick it up on Monday it will be done by Sunday 24th!PHIL069 wrote:Good stuff bestie, bet you can't wait to start it up and have it go vrooooooom
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
-
Vectose
- Forum Moderator
- Posts: 3952
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: Daniel's Rookie DIY FTO Build!
Daniel2019 wrote:Just picked up the engine crane, picking up engine tomorrow morning
?Daniel2019 wrote: Hopefully if I pick it up on Monday it will be done by Sunday 24th!
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?